Microphones / Compare
BEACN Mic vs Shure MV7i
Product A: BEACN
34 of 61 known
Product B: Shure
27 of 53 fields differ
- 17 different values
- 10 known for one only
- 13 the same
- 13 missing for both
Biggest differences
Each bar uses the scale of all 69 microphones.
- Sample rateA: 96kHzB: 48kHzBEACN is 48 kHz higher.
- Bit depthA: 32bitsB: 24bitsBEACN is 8 bits higher.
Weight
0 to 1,000 g
Microphone weight
A751g
B567g
All 61 fields
Every value links to where we found it.


General
4 of 8 differ
Series
Not available
Model numbers
Not available
GTIN / EAN
Announced
Not available
Status
Predecessor
Not available
Not available
Successor
Not available
Not available
Launch price (US)
Launch price (EU)
Not available
Not available
Markets
Not available
Not available
Colours
Microphone type
Capsule and pickup
0 of 4 differ
Capsule size
Not available
Not available
Capsules
Polar patterns
Cardioid1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 2026Page data lists cardioid. The user guide says unidirectional (cardioid).2Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 20265Reviewsoundonsound.com/reviews/shure-mv7iRead 14 October 2026
Address type
Sound specs
5 of 10 differ
Frequency response
Sensitivity (analog)
Not available
Not available
Sensitivity (digital)
-27dBFS1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026Microphone tech specs: -27dBFS at minimum gain. The gain range is 0 to +20 dB. The reference level is not printed, 94 dB SPL at 1 kHz is assumed.7Reviewmusicradar.com/reviews/beacn-mic-reviewRead 15 October 2026Review spec list: sensitivity -27dBFS, adjustable gain 0 to +20dB. It also prints 8 x 2.1 inches as length and width. That size is not stored, since it is rounded and the maker prints no size.
-33dBFS2Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 2026Spec table on page 17 prints -33 dBV/Pa at 1 kHz, open circuit voltage with USB-C connection, 1 Pa = 94 dB SPL, at minimum gain (gain range 0 to +36 dB). The output is digital over USB, and Scan and Pronews print the same figure as dBFS/Pa. Stored as digital sensitivity.7Retailer pagescan.co.uk/products/shure-mv7i-smart-microphone-plus-built-in-interfaceRead 14 October 2026Spec table prints -33 dBFS/Pa at 1 kHz, at minimum gain.
Max SPL
Not available
Max SPL distortion limit
Not available
Not available
Self-noise
Not available
Not available
Digital noise floor
Not available
Signal-to-noise ratio
Not available
Not available
Output impedance
Not available
Not available
Connectivity
2 of 7 differ
Outputs
Inputs for other sources
Not available
USB and XLR at once
Not available
Not available
USB port
USB-C1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026Page: USB Type C connectivity. The support article tells you to plug the USB-C cable into the back of the microphone.2Maker product pagesupport.beacn.com/en-US/articles/getting-started-83261Read 15 October 2026Getting Started: plug the USB-C cable into the back of BEACN Mic and the headphones into the back too.
Cable host plug
Cable length
Digital audio
3 of 3 differ
Max bit depth
Max sample rate
32-bit float recording
Yes1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026USB Output lists 32-bit float at 48/96 kHz. The page adds that float is not supported on all systems and is converted to PCM where necessary.6Reviewredsharknews.com/beacn-mic-review-a-very-solid-performing-microphoneRead 15 October 2026Review repeats the maker figures: 32-bit float works on some systems only.
Monitoring
0 of 2 differ
Headphone output
Zero-latency monitoring
Yes1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026Page: monitor your voice and system sounds in real time. CGMagazine and RedShark News call it zero-latency and delay-free monitoring.5Reviewcgmagonline.com/review/hardware/beacn-mic-reviewRead 15 October 2026The headphone jack on the base is for zero-latency monitoring, and all processing is done in the microphone.6Reviewredsharknews.com/beacn-mic-review-a-very-solid-performing-microphoneRead 15 October 2026Review: delay free monitoring via its own 3.5mm headphone jack.
Controls and processing
2 of 2 differ
Onboard controls
Not available
Mute1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 2026Tapping the LED touch panel mutes each channel. Gain, monitor mix and effects are set in MOTIV Mix.2Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 2026Touch the LED strip to mute. Mute lock is set in MOTIV Mix.5Reviewsoundonsound.com/reviews/shure-mv7iRead 14 October 2026Tapping the LED strip mutes the microphone. No other physical control is described.6Reviewmusictech.com/reviews/studio-recording-gear/shure-mv7i-reviewRead 14 October 2026The LED touch strip is the only control on the body. Tap to mute or unmute.
Onboard processing
Limiter, Compressor, EQ, Noise reduction, Noise gate, Exciter or bass enhancer1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026Microphone modules: Limiter, Compressor, Equalizer, Real-Time Noise Suppression, Expander/Gate and Enhancement Suite. The page says the DSP runs inside the microphone and settings are saved on board. The expander is stored as noise gate. The exciter and bass enhance are stored as exciter or bass enhancer. The de-esser has no matching option and is not stored.
Auto level, Compressor, Limiter, Noise reduction, EQ, High-pass filter, Plosive reduction1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 2026Page says onboard DSP. The user guide spec table lists the built-in DSP as Auto Level Mode with SmartGate, Digital Popper Stopper, Real-Time Denoiser, Tone slider, Reverb, Compressor, Limiter and High-Pass Filter. Settings are made in MOTIV Mix and the microphone keeps the last settings. Digital Popper Stopper and Reverb have no matching option and are not stored. EQ is the tone and EQ control per channel.2Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 2026Spec table lists the built-in DSP: Auto Level mode with SmartGate, Digital Popper Stopper, Real-Time Denoiser, Tone slider, Reverb, Compressor, Limiter, High-pass filter. High-pass filter is 75 Hz or 150 Hz. Compressor and limiter are available when Auto Level is off. Digital Popper Stopper is stored as plosive reduction. The microphone keeps its last settings. The guide is version 1.2 (2025-C), French, hosted by a retailer.5Reviewsoundonsound.com/reviews/shure-mv7iRead 14 October 2026
Mounting and accessories
2 of 4 differ
Mount threads
5/8 inch, 3/8 inch1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026Page: US/EU thread mounting. The support articles name 3/8 inch and 5/8 inch threads on the mount, with no adapter needed.2Maker product pagesupport.beacn.com/en-US/articles/getting-started-83261Read 15 October 2026Mounting article: the top ring fits both common types of mic stand threading, 3/8 inch and 5/8 inch, with no adapter. The dual collar article calls the two threads 1/2 inch with 12 threads per inch and 5/8 inch with 27 threads per inch. The 3/8 inch name is used.5Reviewcgmagonline.com/review/hardware/beacn-mic-reviewRead 15 October 2026The mount has two thread widths built in, so no adapters are needed for most setups.
Shock mount
Not available
Not available
Pop filter
Foam windscreen5Reviewsoundonsound.com/reviews/shure-mv7iRead 14 October 2026Review: out of the box, a foam windshield conceals the wire mesh headbasket. MusicTech says a foam pop shield is included. Shure's box list does not name it separately.6Reviewmusictech.com/reviews/studio-recording-gear/shure-mv7i-reviewRead 14 October 2026Review says a foam pop shield is included and the digital popper stopper can be used alongside it.
Design and build
2 of 3 differ
Housing material
Diecast aluminum1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 20262Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 2026Diecast aluminum (aluminium moule in the French guide). Markertek prints the English wording.
RGB lighting
Lighting zones
Not available
Not available
Software
1 of 2 differ
Software
User firmware updates
Compatibility
1 of 2 differ
Works with
Windows, macOS1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026Page: works on Windows and Mac. System requirements: Windows 10 or later and macOS 12 or later. The downloads page says the current BEACN App needs Windows 11.4Maker product pagebeacn.com/en-us/pages/downloadsRead 15 October 2026BEACN App for Mac requires macOS 12 or later and lists BEACN Mic as compatible. The Windows app requires Windows 11 on the current page.
Windows, macOS, iOS, iPadOS, Android1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 2026MOTIV Mix on Windows 10 and later and macOS 12 and later. MOTIV Audio and Video apps on select USB-C devices with iOS 16 and later or Android 12 and later. Not compatible with iOS devices with Lightning ports. iPadOS follows from MFi certification for iPad in the press release.2Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 2026macOS 12 and later, Windows 10 and later, iOS 16 and later on USB-C devices only, Android 12 and later.
Consoles
Not available
Not available
Dimensions and weight
2 of 3 differ
Microphone dimensions
Not available
Width90Height164Depth207mm(3.5 × 6.5 × 8.1 in)1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 2026Page data: width 207, height 164, depth 90. The user guide prints 164 mm H x 207 mm L x 90 mm l, so 207 is the length front to back and 90 the width.2Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 2026Page 17: 164 mm H x 207 mm L x 90 mm l (hauteur, longueur, largeur), with microphone and yoke at 90 degrees, measured from the surface to the top of the microphone. The microphone points along the 207 mm length, so width 90, height 164 and depth 207.
Microphone weight
567g(1.3 lb)1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 2026Page and user guide net weight. The yoke is part of the microphone.2Maker spec sheet (PDF)media.ldlc.com/nbo/produit/AR202510210147/1763548187-MV7i-user-guide-fr.pdfRead 14 October 2026Net weight 567 g (1.25 lb).
Weight with stand
Not available
Not available
Certifications
1 of 1 differ
Other certifications
In the box
1 of 1 differ
In the box
BEACN Mic, 3 meter USB-C to USB-C cable, USB-C to USB-A adapter, 3.5mm 2 meter headphone extension cable1Maker product pagebeacn.com/en-us/products/beacn-micRead 15 October 2026The page box list reads: BEACN Mic, getting started guide, 3.5m USB-C to USB-C cable, 2m 3.5mm extension cable, USB-C to USB-A adapter. The stored list follows the support article, which says 3 meter. The page's Specifications bullets say a 3M USB-C cable and a 1M headphone extension cable, so the page disagrees with itself.3Maker product pagesupport.beacn.com/en-US/articles/other-83263Read 15 October 2026What comes in the box: 1 BEACN Mic, 1 3 meter USB-C to USB-C cable, 1 USB-C to USB-A adapter, 1 3.5mm 2 meter headphone extension cable.
MV7i, USB-C to USB-C cable, Quick Start Guide1Maker product pageshure.com/en-US/products/microphones/mv7iRead 14 October 2026Box list on the page. No stand, no XLR cable.
Links
Not compared
Product page
Spec sheet
Not available
Not available
Manual
Not available
EPREL registration number
Not available
Not available
Warranty
1 of 1 differ
Manufacturer warranty (source market)
Not available
Both are also in the API. Back to all microphones.



















