Controllers / Compare

GameSir G7 Pro 8K PC vs Nintendo Switch Pro Controller

A

Product A: GameSir

G7 Pro 8K PC

90 of 151 known

Change GameSir G7 Pro 8K PC

Compare the Nintendo Switch Pro Controller with

Search controllers

B

Product B: Nintendo

Switch Pro Controller

92 of 151 known

Change Nintendo Switch Pro Controller

Compare the GameSir G7 Pro 8K PC with

Search controllers

All 151 fields

Every value links to where we found it.

Only differences

AGameSir G7 Pro 8K PC

BNintendo Switch Pro Controller

General

7 of 11 differ

Series

G74Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026FAQ: the three-part magnetic faceplate is fully compatible with faceplates from the previous G7 series. The G7 Pro 8K PC belongs to the G7 line.

Nintendo Switch1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Original Nintendo Switch accessory. Switch 2 Pro Controller is a different product. Reference is the original standard HAC-013, with the original internal CTR-003 cell.

Model numbersiMaker identifiers for this exact model and its listed variants. Excludes sibling models and other generations.

GSG7CEAS001, GSG7XW008K, GSG7XB008K, GSG7XW00XH-1, GSG7CR0015Maker product pageshop.gamesir.com/products/gamesir-g7-pro-8k-pc.jsRead 14 October 2026Public product feed of the GameSir shop. GSG7XW008K (White) and GSG7XB008K (Black) are on the G7 Pro 8K PC page. The Aimlabs, Champion and Royal2 pages list GSG7CEAS001, GSG7XW00XH-1 and GSG7CR001. The Nioh 3 Edition was not checked and is not stored.

HAC-013, HACAFSSKA2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026Original Nintendo-authored HAC-013 controller guide. EU health leaflet separately prints MODEL NO HAC-013. It is not a third-party controller identifying itself as Pro Controller.14Retailer pagegamestop.com/gaming-accessories/controllers/nintendo-switch/products/nintendo-switch-wireless-pro-controller---black/141756.htmlRead 7 October 2026Exact standard Black retail table gives vendor part HACAFSSKA. Physical maker model HAC-013 is retained. Retail SKU is distinguished from component and hardware model numbers.

GTIN / EAN

6936685224100, 6936685225039, 6936685224001, 69366852242925Maker product pageshop.gamesir.com/products/gamesir-g7-pro-8k-pc.jsRead 14 October 2026Barcodes from the same feeds. The Black variant barcode is printed with 14 digits (69366852250229), which is not a valid EAN-13, so it is not stored.

04549659016114Retailer pagegamestop.com/gaming-accessories/controllers/nintendo-switch/products/nintendo-switch-wireless-pro-controller---black/141756.htmlRead 7 October 2026The exact publicly indexed GameStop Specs table gives UPC 045496590161 and Nintendo vendor part HACAFSSKA for standard Black. The complete original table was independently opened. Direct HTTP 403 was respected. Other finishes and clone mirror stores were excluded.

AnnouncediThe maker's first announcement of this model. This is separate from first retail availability.

January 20267Press releasegamesir.com/blogs/news/gamesir-showcases-its-latest-steering-wheel-controller-and-8k-esports-controller-at-ces-2026Read 14 October 2026Maker blog post: at CES 2026 (January 6 to 9) GameSir showed its first 8K controller, the G7 Pro 8K PC with Aimlabs. The post has no visible date, so the month is stored.

20 October 201610Press releasenintendo.com/en-gb/News/2016/October/Nintendo-Switch-world-premiere-demonstrates-new-entertainment-experiences-from-a-home-gaming-system-1148687.htmlRead 7 October 2026Nintendo world-premiere release dated 20 October 2016 explicitly names the optional Nintendo Switch Pro Controller. Announcement is separate from the January pricing presentation and March retail launch.

Status

Available5Maker product pageshop.gamesir.com/products/gamesir-g7-pro-8k-pc.jsRead 14 October 2026In stock on the GameSir shop.

Available11Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 7 October 2026Current maker accessory range says it can be purchased from Nintendo Store and lists the original controller. Its row announces store withdrawal after mid-February 2027. That future European withdrawal is separate from current lifecycle and retailer stock.

PredecessoriThe model this one directly replaced, in the same line, tier and size, as the maker or a trusted review names it.

Not available

Not available

SuccessoriThe model that directly replaced this one, in the same line, tier and size. A revision such as a Slim or OLED model does not count when a next generation exists.

Not available

Nintendo Switch 2 Pro Controller32Reviewgamesradar.com/hardware/gaming-controllers/nintendo-switch-2-pro-controller-reviewRead 7 October 2026Introduction calls the Switch 2 Pro Controller Nintendo second generation of the original. Performance expressly contrasts original Pro Controller with new generation. This proves the direct marketed family successor. Unrelated retrospective weight/material errors are not transferred.

Launch price (US)iThe maker's US launch MSRP for the stated configuration, excluding tax. Current store prices and later discounts do not qualify.

From $89.995Maker product pageshop.gamesir.com/products/gamesir-g7-pro-8k-pc.jsRead 14 October 20269Reviewgamingtrend.com/reviews/gamesir-g7-pro-8k-aimlabs-edition-controller-reviewRead 14 October 2026

$69.998Press articlemynintendonews.com/2017/03/03/the-nintendo-switch-launches-todayRead 5 October 2026Dated March 3, 2017 reproduction of Nintendo launch statement explicitly gives original controller US suggested price 69.99 USD. Current store price not substituted.

Launch price (EU)iThe maker's euro launch price for the stated configuration, including VAT as published. Current store prices and later discounts do not qualify.

Not available

Not available

MarketsiISO country or region codes where this exact model or variant is sold. A source page's language does not establish availability.

Not available

GB, HK, US11Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 7 October 2026The current original UK maker accessory sales listing proves GB. Separate exact Hong Kong warranty applicability and US standard retail sales prove HK and US. Language alone is not market evidence.13Maker product pagesupport.nintendo.com/hk/switch/support/eula/repair_polichy.htmlRead 7 October 2026Exact maker UK current accessory sales and Hong Kong licensed-product warranty applicability prove those source markets. Neither is inferred from language alone.14Retailer pagegamestop.com/gaming-accessories/controllers/nintendo-switch/products/nintendo-switch-wireless-pro-controller---black/141756.htmlRead 7 October 2026The exact US retailer standard Black page offers the new controller and states US shipping restrictions. Vendor HACAFSSKA identifies the marketed US SKU. The former Dell URL redirects to an unrelated category and is not relied on.

ColoursiThe maker's own colour names

Ivory White, Obsidian Black6Press articleplayday.one/2026/09/08/gamesir-g7-pro-8k-pc-colour-variants-announcedRead 14 October 2026Article dated 2026-09-08: the G7 Pro 8K PC is now available in Ivory White and Obsidian Black. The shop feed calls them White and Black.

Black12Maker product pagenintendo.com/au/support/articles/unable-to-pair-or-sync-nintendo-switch-pro-controllerRead 7 October 2026Maker troubleshooting explicitly identifies standard black and separately the Splatoon 2 and Xenoblade Chronicles 2 editions as HAC-013. Store only Black for the standard reference. Edition names are not finish labels.

Form factor

Gamepad1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Overview: Wireless Esports Controller for PC, a gamepad with two sticks, a D-pad, face buttons, bumpers and triggers.

Gamepad1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Stick layout

Offset11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026"Joystick positioning: Asymmetric", the Xbox offset layout.

Offset2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026Exact full front drawing shows left upper and right lower sticks with Nintendo ABXY order and one cross-shaped control pad.

Face button labels

Xbox11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026"Button layout: Xbox".

Nintendo2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

Made by the platform holder

No11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026Third-party controller. It is not licensed for Xbox consoles.

Yes1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Compatibility

5 of 9 differ

Platforms

Windows, Android, Nintendo Switch, Nintendo Switch 21Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Tech Specs: Compatible Platforms PC. The manual adds Android and Switch over Bluetooth. The Aimlabs page title also names iOS, which the manual does not, so iOS is not stored.

Nintendo Switch, Nintendo Switch 2, Windows, macOS, Linux, Android, iOS1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Original Switch support is explicit on the exact accessory page. Forward compatibility with Switch 2 is independently documented by the maker compatibility page, with wake-from-sleep limitations. PC/mobile use is not represented without platform/feature qualification.4Maker product pagenintendo.com/en-gb/Hardware/Nintendo-Switch-2/Compatibility-with-Nintendo-Switch-accessories-2786091.htmlRead 5 October 202633Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 7 October 2026Exact verified Platforms table separately says Yes for Windows, macOS, Linux, Android and iOS. Actual original-controller Windows USB and Bluetooth measurements corroborate Windows. Game, app, OS version and individual features can vary. No universal NFC, gyro or all-feature guarantee on those hosts.

Connection per platform

AGameSir G7 Pro 8K PC

Platform	Connection	All features
Windows	USB (wired)	Not available
Windows	2.4 GHz	Not available
Windows	Bluetooth	Not available
Android	Bluetooth	No
Nintendo Switch	Bluetooth	No
Nintendo Switch 2	Bluetooth	No

Source4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026System Requirements: Windows 10/11 with Bluetooth, wireless dongle or wired. Android 8.0 or above with Bluetooth. Switch and Switch 2 with Bluetooth. "8K Polling Rate Only Works On PC".

BNintendo Switch Pro Controller

Platform	Connection	All features
Nintendo Switch	Bluetooth	Yes
Nintendo Switch	USB (wired)	No
Nintendo Switch 2	Bluetooth	No
Nintendo Switch 2	USB (wired)	No
Windows	Bluetooth	Not available
Windows	USB (wired)	Not available

Source3Maker product pagenintendo.com/ph/support/qa/detail/34532Read 5 October 2026Switch USB mode disables NFC, so not all features. Switch Bluetooth retains original controller features. Switch 2 wireless compatibility lacks console wake. USB input on Switch 2 is not inferred from its ability to charge through the dock.4Maker product pagenintendo.com/en-gb/Hardware/Nintendo-Switch-2/Compatibility-with-Nintendo-Switch-accessories-2786091.htmlRead 5 October 2026Exact original Pro Controller row: compatible wirelessly with Switch 2, can charge via USB at dock, cannot wake Switch 2 from sleep through HOME. This does not imply wired data compatibility.20Maker product pagenintendo.com/en-gb/Support/Troubleshooting/How-to-Enable-Disable-Pro-Controller-Wired-Communication-1516284.htmlRead 7 October 2026Current exact original-controller FAQ explicitly supports wired communication on Switch 2 and Switch. Switch 2 enables it under Controllers and Accessories. NFC is disabled, so full_features is false. This newly proves wired input, beyond the earlier compatibility page only documenting charging. New Switch 2 Pro Controller behavior is separate.33Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 7 October 2026Original-controller hardware tests explicitly use Windows 11 with Bluetooth and cable in Switch mode. Added those two connections. Full-feature cells remain unknown and are omitted, rather than assumed false or true. The community platform table does not specify exact connection paths for every other named OS, so no rows are invented.

Official licence

Not available

Not available

Input modes

XInput, Switch Pro, Sony controller mode4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Manually Switch Mode: hold View and Menu for 2 seconds to cycle XInput and Switch modes, receiver and wired only. Gamepadla also tested a Sony interface over Bluetooth.11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026Tests run in XInput over cable and dongle and in a Sony interface over Bluetooth.

Switch Pro7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026Actual Windows hardware latency tests identify native Switch mode. No XInput protocol is inferred from Steam emulation.

Mode switching

Button combo4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026View and Menu together cycle XInput and Switch modes. A slide Mode Switch picks the connection (receiver, Bluetooth, wired).

Not available

Native Steam Input supportiOfficial Steam Input integration that exposes controller-specific inputs. This does not mean a game uses the Steam Input API or that the controller has only one input protocol.

Not available

Yes15Maker product pagepartner.steamgames.com/doc/features/steam_controller/deviceRead 7 October 2026Valve official Supported Devices list names Nintendo Switch Pro Controller and describes controller-specific configurator support. The original launch separately documents gyro binding and action sets. Host Steam Input integration does not mean every game uses the API or controller firmware implements XInput.

Wakes the supported consoleiWhether the controller can wake a supported console from sleep. The applicable console or Steam Machine is identified in source notes.

Yes4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Switch 2 Wake-Up Tutorial: after pairing, the controller wakes the Switch 2. This is the Switch 2 only.

Yes17Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 7 October 2026Gamepadla verified Features table says Switch Wake Up Yes. Applies to the original Nintendo Switch. Maker explicitly excludes waking Switch 2 through the original controller HOME button. No all-console claim.

Max phone length

Not available

Not available

Works with phone case

Not available

Not available

Connectivity

9 of 15 differ

Connections

USB (wired), 2.4 GHz, Bluetooth1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Connection: Tri-Mode. The Aimlabs page spells it out as Bluetooth, 2.4G wireless and USB-C wired.

Bluetooth, USB (wired)3Maker product pagenintendo.com/ph/support/qa/detail/34532Read 5 October 2026Original Switch TV Mode supports wired input when Pro Controller Wired Communication is enabled, system 3.0.0 or later. A charging cable alone would not establish wired reports.

Controller Bluetooth versioniBluetooth version implemented by the controller. Host device minimum requirements are not the controller’s Bluetooth version.

Not available

3.01Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Wireless receiver

Included1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Wireless Receiver is in the box. MobileSyrup says the dock doubles as the dongle holder.

None30Reviewifixit.com/Device/Switch_Pro_ControllerRead 7 October 2026Exact original HAC-013 device page complete Box Contents lists controller and USB-C charging cable. Maker guide separately identifies Bluetooth as its only wireless network port. No proprietary USB radio receiver. A generic host Bluetooth adapter is separate.

Receiver connector

Not available

Not available

Wireless range (claimed)

Not available

Not available

Paired device slots

Not available

118Maker product pagenintendo.com/sg/support/switch/controller/nintendoswitchpro.htmlRead 7 October 2026Exact maker Different console section says only one console can be paired at a time and requires pairing again when using a different console. Counts one remembered console pairing, separate from a console accepting up to eight controllers or a PC Bluetooth pairing list.

Wired connector

USB-C1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Type-C Cable in the box and a USB-C wired mode.

USB-C1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

USB

Not available

Not available

Detachable cable

Yes1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026The Type-C cable is a separate item in the box.

Yes2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

Cable length

Not available

1.5m21Retailer pagemediaworld.co.jp/products/12021930000Read 7 October 2026Exact genuine Nintendo HAC-010 retail description says cord length approximately 1.5 m and identifies it as included with the original Pro Controller. Maker guide independently proves the included part identity. A second exact genuine-cable retailer corroborates. Excludes AC adapter and optional dock cables.

Cable type

USB-C1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Box list: Type-C Cable.

USB-A to USB-C charging and data cable2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026Maker guide original connection drawing shows USB-A host and USB-C controller ends. This is detachable. Data input through that cable is independently established by the maker wired-communication FAQ.

Claimed polling rate by connectioniMaker-claimed report rate for the stated connection and platform. Tournament modes or protocol requirements go in source notes. This is not input latency or a reviewer measurement.

AGameSir G7 Pro 8K PC

Connection	Platform	Polling rate (Hz)
USB (wired)	Windows	8,000
2.4 GHz	Windows	8,000

Source1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026"Up to 8000 Hz via wired and 2.4 GHz connections". The manual says 8K polling works only on PC. No Bluetooth rate is published.

BNintendo Switch Pro Controller

Not available

Polling rate wired

8,000Hz=CalculatedFrom Claimed polling rate by connection

Not available

Polling rate wireless

8,000Hz=CalculatedFrom Claimed polling rate by connection

Not available

Polling rate Bluetooth

Not available

Not available

Sticks

11 of 15 differ

Stick sensor

TMR1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Sticks Tech: Gen-2 GameSir Mag-Res TMR Sticks.

Potentiometer7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026Exact controller verified specification table says potentiometers. No physical stick part number inferred.

Stick module nameiPublished module part number or maker-branded stick mechanism. A brand name does not establish the component manufacturer.

GameSir Mag-Res TMR Gen-21Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Maker-branded stick mechanism. The brand name does not name the component maker.

Not available

Stick resolution (claimed)

12bits2Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 2026"12- bit Industrial-Grade ADC Chip" and "4096- level Joystick Resolution". This is the maker claim, not the measured step count.

Not available

Default dead zone (claimed)

Not available

Not available

Adjustable dead zoneiTrue when the stick dead zone can be changed on the controller or in an app. A switch between the default and a zero dead zone counts.

Yes3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026The manual toggles the dead zone per stick, and GameSir Connect adjusts dead zones per GamingTrend.4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Dead Zone Toggle: hold M and press a stick to switch its dead zone on or off. The FAQ calls this the Raw Mode (zero dead zone) toggle.

Not available

Adjustable response curve

Yes2Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 2026GameSir Connect: "Fine-tune macros, stick curves, trigger response, vibration, and RGB."

Not available

Adjustable stick tension

No4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026No tension setting appears in the manual. Gamepadla lists no stick tension.11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026"Stick tension: No", marked verified.

Not available

Tension levels

Not available

Not available

Stick throw

Not available

Not available

Stick gate

Not available

Not available

Stick click (L3/R3)

Not available

Yes1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Exact front-view component list explicitly describes both sticks as buttons when pressed down.

Swappable stick tops

Yes3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026The Aimlabs Edition box lists three interchangeable stick caps. Breaking Point says you can swap between concave and domed sticks.10Reviewbreakingpoint.gg/posts/gamesir-g7-pro-8k-the-best-new-controller-for-competitive-playRead 14 October 2026Testers could swap between concave and domed sticks.

No26Reviewgamesradar.com/nintendo-switch-pro-controller-reviewRead 7 October 2026GamesRadar Features explicitly excludes interchangeable analog sticks in its consumer adjustable-controller comparison. Stock stick-top options are meant here. Repair caps can be removed after disassembly, which is separate from a consumer swap feature.

Stick tops includediStick cap styles included in this configuration. Counts fitted caps as well as spare caps. Optional caps sold separately are not included.

Not available

Standard fitted joystick caps (2)31Reviewifixit.com/Guide/Nintendo+Switch+Pro+Controller+Joystick+Module+Replacement/127716Read 7 October 2026Step 12 explicitly pulls the two joystick caps off the original controller. Fitted standard caps count as included. Full standard box has no spare-cap options. Shape left generic because secondary descriptions conflict between concave middle and convex central bump. No optional third-party caps included.

Replaceable stick modules

Not available

Soldered22Reviewifixit.com/Guide/Nintendo+Switch+Pro+Controller+Joystick+Module+Replacement/127716Read 7 October 2026Exact original stick-module replacement guide Step 16 requires desoldering the outlined joints before removing the module. Earlier removable caps are separate. This is soldered service, not hot swapping.

Stick calibration

On the device4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Calibration: hold View, Menu and Home for 2 seconds, then rotate the sticks and press the triggers. This is on the controller.

System settings6Maker product pagenintendo.com/au/support/articles/system-update-information-for-nintendo-switchRead 5 October 2026Exact Switch system supports control-stick calibration through Controllers and Sensors. This is console calibration, not an onboard controller button combination.

Triggers

5 of 10 differ

Trigger sensoriDigital is on or off. Analog is for analog triggers whose sensor no source names.

Hall effect1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Trigger Tech: Micro Switch Triggers / Hall Effect Analog Triggers. The analog mode is Hall effect.

Digital7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026Exact verified specification table says triggers digital, and trigger lock No. Ordinary press travel is not an analog input range.

Trigger resolution

Not available

Not available

Trigger travel

Not available

Not available

Trigger stops

Yes1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Dual-mode trigger stops switch between the Hall effect analog trigger and the micro switch trigger.

No7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026

Trigger stop positions

21Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Two modes: analog full travel and micro switch.

Not available

Trigger stop type

Mechanical click1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Dual-mode trigger stops with a clicky micro switch trigger mode, stored as mechanical click as for the G7 Pro.

Not available

Shortest trigger travel

Not available

Not available

Adjustable trigger dead zone

Not available

Not available

Hair trigger mode

Yes3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026The micro switch trigger gives an instant on-off response. The manual also has an Adaptive Hair Trigger toggle.4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Hair Trigger Mode: hold M and LT or RT for 2 seconds in long-travel mode.

Not available

Adaptive triggers

Not available

Not available

Buttons

14 of 17 differ

Face button switches

Optical1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026ABXY Buttons: Optical Micro Switch.

Membrane7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026Exact verified internal table says main buttons membrane and D-pad membrane. Other switch hardware types and supplier remain unknown.

Face button switch nameiPublished switch or mechanism name. May be the maker’s branded design rather than a component part number.

Optical Micro Switch1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Maker name: Optical Micro Switch.

Not available

Swappable face buttons

Not available

Not available

Bumper switches

Mecha-tactile1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Bumpers: Tactile Switch, stored as mechanical tactile. The two mini bumpers use micro switches and the back buttons use tactile switches.

Not available

D-pad

Swappable9Reviewgamingtrend.com/reviews/gamesir-g7-pro-8k-aimlabs-edition-controller-reviewRead 14 October 2026Describes a circle D-pad and the box holds two spare D-pads, so the shape is stored as swappable. The reviewer also notes the battery generally lasts eight to twelve hours, which is not stored.

Cross2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

D-pad switches

Micro switch1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026D-pad: Micro Switch.

Membrane7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026

Rear grip buttons or paddlesiMaximum number of additional rear grip inputs the controller supports. Excludes standard shoulder buttons and triggers (L1/R1/L2/R2 or LB/RB/LT/RT), extra shoulder buttons and front buttons. Removable paddles are counted when fitted. Check the box contents for included paddles.

23Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026Tech Specs: Back Buttons 2, the lockable R4 and L4. The two mini bumpers R5 and L5 are separate.

02Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026Complete maker front/rear control inventory has no rear buttons, paddles or extra shoulder buttons. Standard L/R/ZL/ZR are excluded from extra shoulder count.

Rear grip input typeiPhysical form of the additional rear grip inputs. Swappable means the same slots accept alternative button and lever or paddle shapes.

Buttons3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026The maker calls them back buttons. Stored as buttons, as for the G7 Pro.

Not available

Removable rear paddlesiWhether rear paddles or lever-shaped back buttons can be removed by the user. This does not count the standard shoulder buttons or triggers.

Not available

Not available

Additional shoulder buttonsiAdditional physical shoulder or bumper buttons. Excludes standard L1/R1/L2/R2 or LB/RB/LT/RT controls and rear grip inputs.

23Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026Mini Bumpers: 2 (R5 and L5).

02Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

Additional remappable buttonsiCounts additional remappable controls across the rear, shoulders and front. Excludes normal face buttons, D-pad directions, stick clicks, standard shoulders and triggers, and system or profile buttons. Optional removable paddles count when fitted.

43Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026"Four Remappable Macro Buttons": R4, L4, R5 and L5.

Not available

On-controller remappingiAt least one configurable gameplay button can be remapped using controller controls without a companion app. Does not imply that every button is remappable without software.

Yes4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Macro Button Settings: hold M and L4, R4, L5 or R5, then press the button to assign. FAQ: back buttons can also be set with the M button combination.

Not available

Custom onboard profilesiNumber of additional named or custom profiles stored on the controller, beyond any separate default bank identified by the maker. Excludes app-only profiles. Does not assume the default bank is immutable.

44Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Configuration Switch lists Profile 1 to Profile 4, chosen with M and a right stick direction. The manual does not describe a separate default bank.

019Maker product pagenintendo.com/au/support/articles/button-mapping-faqRead 7 October 2026Maker FAQ explicitly says mappings are saved on the console, not on the controller, and do not carry to another console. Its five console presets are excluded from the custom onboard-profile count. Zero expresses that explicit storage distinction.

Profile switch controliA dedicated button, or a dedicated function button used in a combination, that switches saved controller profiles.

Yes4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026The M button plus a right stick direction selects the profile.

Not available

Turbo

Yes1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Turbo Function: Yes, adjustable in GameSir Connect.3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026"Yes, adjustable in three levels: 10Hz/20Hz/30Hz".4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Turbo cycles through off and three levels.

Not available

Macros

Yes1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Macro Buttons: Yes, adjustable in GameSir Connect.4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Macros record up to 32 steps.

No7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026Exact verified controller specification table says macros No. Host-side Steam or other software automation is separate.

Share or capture button

Yes9Reviewgamingtrend.com/reviews/gamesir-g7-pro-8k-aimlabs-edition-controller-reviewRead 14 October 2026"There's a share button under the power button".

Yes1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Maker Capture button explicitly takes screenshot/video. It is separate from the newer GameChat button.

Feedback

4 of 5 differ

RumbleiFeedback features as published. Trigger rumble means dedicated trigger-vibration feedback, separate from motor-driven adaptive trigger resistance. HD haptics follows the maker’s stated high-definition feedback feature.

Rumble1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Rumble Motors: Dual Asymmetric Motors in the Grips. No trigger motors are listed.

HD haptics1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Rumble motor type

Not available

LRA23Maker product pagedocs.handheldlegend.com/s/portal/doc/pro-controller-disassembly-K5HQ3BSETwRead 7 October 2026Original-controller repair-parts provider disassembly guide expressly calls the HD Rumble units LRA motors under Rear Shell Removal and Stick PCB Removal. No actuator type is inferred solely from HD branding. Switch 2 hardware is excluded.

Rumble motors in grips

21Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Two asymmetric motors in the grips.

224Reviewifixit.com/Guide/Nintendo+Switch+Pro+Controller+Rumble+Modules+Replacement/137037Read 7 October 2026Exact original-controller guide Step 19 desolders motor points on either side of the motherboard. The complete assembly photographs show one actuator in each grip. Physical repair inventory gives two grip actuators, excluding trigger actuators and software channels.

Trigger rumble motors

Not available

017Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 7 October 2026Gamepadla verified Trigger Vibration table says No. Full original-controller repair inventory shows two grip modules and digital trigger assemblies without dedicated trigger actuators. Zero counts dedicated trigger motors, excluding the two HD grip actuators.

Adjustable rumble

Yes2Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 2026GameSir Connect tunes vibration. The manual also adjusts it on the controller with M and View or Menu.

Not available

Motion and touch

6 of 12 differ

Gyroscope

Yes2Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 2026"6-Axis Motion Control".3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026Motion Control: 6-axis gyroscope.

Yes1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Combined motion sensor axesiTotal gyroscope and accelerometer axes. A three-axis gyroscope plus a three-axis accelerometer is a six-axis motion sensor.

62Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 20266-Axis Motion Control.3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 20266-axis gyroscope.

629Maker product pagejoypad.ai/controllers/nintendo-switch-pro-controllerRead 7 October 2026Exact original-controller input and adapter provider Joypad lists Motion: 6-axis motion sensor (accelerometer + gyroscope). Nintendo separately names both sensor types. No clone specification or unidentified sensor part is borrowed.

Gyro as mouse

Not available

Yes16Maker product pagestore.steampowered.com/oldnewsRead 7 October 2026Valve 14 June 2023 release notes fix Gyro to Mouse rotation and explicitly adjust Switch Pro gyro configurations. They distinguish Gyro As Mouse from sensor-fusion styles. This uses Steam Input host mouse emulation and needs suitable configuration. It is not an onboard Nintendo mouse mode.

Touchpad

Not available

No2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026Complete external drawings/component inventory has no touchpad, display, audio socket, microphone-mute button or decorative light bar. Status/player/notification LEDs are separate from decorative RGB.

Touchpads

Not available

Not available

Clickable touchpadiSupports a press-to-click action, including pressure-sensed haptic clicks. Does not imply a mechanically moving switch.

Not available

Not available

NFC

Not available

Yes1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

IR camera

Not available

No8Press articlemynintendonews.com/2017/03/03/the-nintendo-switch-launches-todayRead 5 October 2026Original launch statement explicitly says original Pro Controller includes Joy-Con motion/HD rumble features except IR Motion Camera. No newer-model sensor inferred.

Built-in display

No11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026Community spec list, marked verified: "Display: No".

No2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

Light bar

Not available

No2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

RGB lighting

Yes2Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 2026GameSir Connect tunes RGB, as listed on the page.

No2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

Lighting zones

Not available

Not available

Measured

10 of 13 differ

Measured input latencyiHardware-measured latency for the documented stock setup. Connection, input, operating system, input mode, firmware, tester and settings are recorded in source notes. Polling rate is a separate report-rate measurement. Different setups are separate rows.

AGameSir G7 Pro 8K PC

Connection	Input	Average (ms)	Min (ms)	Max (ms)	Jitter (ms)	Polling rate (Hz)	Tested on
USB (wired)	Button	1.36	1.11	1.74	0.13	7,042.25	Windows
USB (wired)	Stick	2.46	2.1	2.94	0.19	7,042.25	Windows
2.4 GHz	Button	3.36	2.63	4.27	0.38	6,666.67	Windows
2.4 GHz	Stick	10.03	5.04	12.54	2.36	6,666.67	Windows
Bluetooth	Button	3.34	1.95	13.91	1.73	798.72	Windows
Bluetooth	Stick	8.54	6.4	20.67	2.06	798.72	Windows

Source11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026Prometheus 82 hardware tester, Windows 11 build 10.0.26200, firmware 1.9.7, tester LJ Lee, 2026-03-22. Rows are cable XInput (button #8342, stick #8330), dongle XInput (button #8338, stick #8333) and Bluetooth Sony (button #8339, stick #8341). Polling rate is the site's software median. The page is marked Not verified yet and names no edition. Eight more tests exist and are not stored.

BNintendo Switch Pro Controller

Connection	Input	Average (ms)	Min (ms)	Max (ms)	Jitter (ms)	Polling rate (Hz)	Tested on
Bluetooth	Button	16.81	5.94	27.65	5.98	65.89	Windows
Bluetooth	Stick	21.14	7.24	65.22	12.71	65.89	Windows
USB (wired)	Button	21.81	11.57	32.85	4.91	73.64	Windows
USB (wired)	Stick	22.15	7.5	32.95	5.78	73.91	Windows

Source7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026Exact primary Prometheus 82 hardware tests by Patrick Burton, Windows 11 build 10.0.26100, tester 5.2.3.1. Bluetooth rows tests 6693/6692 on 2025-09-28. USB button test 6757 on 2025-10-07, USB stick 6680 on 2025-09-28. Firmware and settings unspecified. Measured report rates are not claimed polling modes. Bluetooth faster than wired remains documented, not overwritten.

Button latency wired (measured, highest average)iHighest average latency among the stored reviewer setups for this connection and input. It is not the maximum individual event or a guaranteed result for every platform. See source notes for each setup.

1.36ms=CalculatedFrom Measured input latency

21.81ms=CalculatedFrom Measured input latency

Button latency wireless (measured, highest average)iHighest average latency among the stored reviewer setups for this connection and input. It is not the maximum individual event or a guaranteed result for every platform. See source notes for each setup.

3.36ms=CalculatedFrom Measured input latency

Not available

Button latency Bluetooth (measured, highest average)iHighest average latency among the stored reviewer setups for this connection and input. It is not the maximum individual event or a guaranteed result for every platform. See source notes for each setup.

3.34ms=CalculatedFrom Measured input latency

16.81ms=CalculatedFrom Measured input latency

Stick latency wired (measured, highest average)iHighest average latency among the stored reviewer setups for this connection and input. It is not the maximum individual event or a guaranteed result for every platform. See source notes for each setup.

2.46ms=CalculatedFrom Measured input latency

22.15ms=CalculatedFrom Measured input latency

Stick latency wireless (measured, highest average)iHighest average latency among the stored reviewer setups for this connection and input. It is not the maximum individual event or a guaranteed result for every platform. See source notes for each setup.

10.03ms=CalculatedFrom Measured input latency

Not available

Stick latency Bluetooth (measured, highest average)iHighest average latency among the stored reviewer setups for this connection and input. It is not the maximum individual event or a guaranteed result for every platform. See source notes for each setup.

8.54ms=CalculatedFrom Measured input latency

21.14ms=CalculatedFrom Measured input latency

Measured stick testsiReviewer measurements for each stick under the connection, input mode, firmware and calibration settings documented in source notes. Inner dead zone reported as absent is stored as zero. Outer dead zones in mm are not converted to percent.

AGameSir G7 Pro 8K PC

Stick	Inner dead zone	Circularity error	Resolution steps	Centring error
Left	0%	6.8%	1,552	0.4%
Right	0%	6.8%	1,176	0%

Source11Measurementgamepadla.com/g7-pro-8k.htmlRead 14 October 2026Stick Tracer test on 2026-07-05, Windows 11, cable, XInput, firmware 2.0.1. Left and right circle error 6.8%, centre error 0.4% and 0.0%, 10.6 bit (1,552 steps) and 10.2 bit (1,176 steps). Inner dead zone is reported as none and stored as 0. The measured steps are below the maker's 12-bit ADC claim.

BNintendo Switch Pro Controller

Stick	Inner dead zone	Circularity error	Resolution steps	Centring error
Left	0%	3.4%	1,552	3.9%
Right	0%	5.5%	1,552	1.1%

Source7Measurementgamepadla.com/nintendo-switch-pro-controller.htmlRead 5 October 2026Exact John Punch Stick Tracer 2026-04-16, Windows 10.0.19045, Bluetooth native Switch. Firmware Box, version and calibration unspecified. Left/right 1552 measured movement steps, circularity 3.4/5.5%, centering 3.9/1.1%, inner deadzone explicitly none. Unpublished outer deadzone and nominal ADC bit resolution omitted.

Inner dead zone (measured, worst stick)iMeasured by a reviewer, not claimed by the maker

0%=CalculatedFrom Measured stick tests

0%=CalculatedFrom Measured stick tests

Circularity error (measured, worst stick)iMeasured by a reviewer, not claimed by the maker

6.8%=CalculatedFrom Measured stick tests

5.5%=CalculatedFrom Measured stick tests

Measured battery lifeiReviewer-measured runtime under the connection, activity, rumble and lighting settings stated in source notes. Missing setup cells are unknown, not disabled.

Not available

Not available

Full charge time (measured)iReviewer measurement from an empty battery to full. Source notes identify the power source, connection, controller operating state and test method when published. Partial charges and maker claims are excluded.

Not available

Not available

Weight (measured)iMeasured by a reviewer, not claimed by the maker

267g(9.4 oz)10Reviewbreakingpoint.gg/posts/gamesir-g7-pro-8k-the-best-new-controller-for-competitive-playRead 14 October 2026Lists Gamesir G7 Pro 8k Aimlabs at 267g in a weight comparison credited to a tester. The scale and the conditions are not stated. It supports 272 g over the 392 g listed on the Aimlabs page.

Not available

Audio

3 of 6 differ

3.5 mm jack

Yes3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 20263.5mm Audio Jack: Yes.

No2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

Jack works over

USB (wired), 2.4 GHz3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026"supported on both wired & 2.4G wireless".

Not available

Speaker

Not available

Not available

Microphone

Not available

Not available

Microphone mute controliDedicated physical button or switch on the controller that mutes a built-in or connected headset microphone. Excludes a normal gameplay button assigned to mute through software.

Not available

No2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026

Expansion port

Not available

Not available

Battery and charging

10 of 13 differ

Battery type

Built-in1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026A 1200mAh battery is listed. GamingTrend and MobileSyrup describe it as inside the controller.

Built-in1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Original maker internal lithium-ion CTR-003 battery. Disposal removal does not establish a supported user hot-swap feature.

Batteries

Not available

114Retailer pagegamestop.com/gaming-accessories/controllers/nintendo-switch/products/nintendo-switch-wireless-pro-controller---black/141756.htmlRead 7 October 2026Exact retailer Power table says Number of batteries 1. Maker identifies the dedicated CTR-003 cell. The original-controller repair guide shows one cell. Charging current and AA-cell examples are excluded.

Batteries included

Yes1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Built-in battery, so it ships with the controller.

Yes1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Battery capacity

1,200mAh1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Battery 1200mAh.6Press articleplayday.one/2026/09/08/gamesir-g7-pro-8k-pc-colour-variants-announcedRead 14 October 2026Battery: 1200mAh in the same list.

1,300mAh1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Exact CTR-003 charge rating 1300 mAh. No nominal voltage or Wh inferred.

Battery energy

Not available

5Wh2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026The exact original Pro Controller guide says to use only its dedicated CTR-003 battery. The maker accessories table independently identifies the fitted lithium-ion CTR-003 at 1300 mAh. The original Nintendo 3DS technical table separately publishes 5 Wh for that same named component. Exact component identity bridge only. No voltage and capacity multiplication.34Owner's manualnintendo.com/eu/media/downloads/support_1/nintendo_3ds_14/Nintendo3DS_OperationsManual_DE.pdfRead 7 October 2026The original Nintendo 3DS technical table, printed page 102, PDF page 52, explicitly identifies model CTR-003, lithium-ion and battery capacity 5 Wh. The original maker PDF was freshly downloaded and read. The Pro Controller maker guide and fitted-battery table identify the same CTR-003. Static component rating only. No inherited 3DS runtime or computed energy.

Claimed battery lifeiMaker-claimed runtime. Missing connection, rumble or lighting cells mean that the maker did not state that condition. A plus sign or up-to qualifier is preserved in source notes.

AGameSir G7 Pro 8K PC

Not available

BNintendo Switch Pro Controller

Hours (h)
40

Source1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Maker approximately 40 hours. Connection, usage conditions, rumble, firmware and lighting are unspecified and omitted from the row. This is a maker estimate, not measured runtime.

Longest claimed battery lifeiLargest numerical runtime figure in the stored maker claims. A 35+ hour claim is a lower-bound figure, not an upper limit. Up-to, approximate and plus qualifiers are preserved in source notes.

Not available

40h=CalculatedFrom Claimed battery life

Charging connectoriConnector used for charging a rechargeable battery. On AA-powered controllers, USB charging requires a compatible rechargeable pack and does not recharge ordinary AA cells.

USB-C1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026The controller has a USB-C port and the box has a Type-C cable. The dock charges it as well.

USB-C1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Full charge time (claimed)iMaker-claimed charging time from an empty battery to full. Charger, cable and controller power state are noted when published.

Not available

360min1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Maker approximately six hours using HAC-002 adapter or supplied USB cable. Exact time-unit conversion to 360 minutes preserves approximation. Adapter support for 7.5 W is not a controller charging-input rating.

Charging dock

Included1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Charging Dock: Yes, and the box contains a Charging Dock.

Sold separately35Maker spec sheet (PDF)powera.com/siteassets/user-manuals/nsw/nsw-charging/swch_joy-conpro-controller_charging_dock_um_1684785890.pdfRead 7 October 2026The original 2017 licensed PowerA manual explicitly charges one original Nintendo Switch Pro Controller and two Joy-Con. It lists the supplied USB-C charging adapter and gives exact controller docking steps. This separate accessory is required and is absent from the standard controller box. No common-connector inference or Switch 2 controller transfer. Exact maker accessory evidence resolves the broad Gamepadla dock No entry under the agreed field scope.

Dock

Charging Dock1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Maker wording in the box list.

PowerA Joy-Con & Pro Controller Charging Dock35Maker spec sheet (PDF)powera.com/siteassets/user-manuals/nsw/nsw-charging/swch_joy-conpro-controller_charging_dock_um_1684785890.pdfRead 7 October 2026The original PowerA manual title is Joy-Con & Pro Controller Charging Dock. Compatible licensed third-party charging accessory sold separately. No first-party dock claim. The accessory licence is not inherited as a controller licence.

Play while charging

Not available

Yes5Maker product pagenintendo.com/sg/support/switch/controller/nintendoswitchpro.htmlRead 5 October 2026Maker Pairing section explicitly says connect HAC-010 to dock to charge as you play.

Battery indicator

Not available

LED, On screen2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 202627Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22747/p/989/c/182Read 7 October 2026Maker USB troubleshooting explicitly checks the Pro Controller battery charge through Controllers on the HOME Menu. Existing LED indicator is retained. The screen belongs to the console.

Build

4 of 5 differ

Shell material

Not available

Plastic casing with a slightly translucent finish25Reviewtechradar.com/reviews/nintendo-switch-pro-controllerRead 7 October 2026Exact TechRadar Design paragraph describes a slightly translucent finish to its plastic casing. Generic plastic only. No ABS or polycarbonate composition is inferred. Scope is the original standard Black body.

Grip texture

Not available

Slightly textured handles26Reviewgamesradar.com/nintendo-switch-pro-controller-reviewRead 7 October 2026GamesRadar Design explicitly describes the handles as slightly textured. No rubber material is inferred. Gamepadla Rubber handles No agrees. Conflicting retrospective rubber descriptions in a newer-controller review are not copied.

Swappable grips

Not available

Not available

Swappable faceplate

Yes2Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 2026"Swappable Faceplate for More Personal Design".

Not available

User-replaceable parts

Faceplate sections, D-pad, Thumbstick caps3Maker product pageshop.gamesir.com/products/gamesir-g7-pro-aimlabs-editionRead 14 October 2026Faceplate in three parts, D-pads and interchangeable stick caps, from the Aimlabs page and its box list.

Not available

Software

2 of 3 differ

Companion app

GameSir Connect1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Customization Software: GameSir Connect.

Not available

App platforms

Windows4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026GameSir Connect is the PC software. The maker page lists the Windows and Microsoft Store downloads.

Not available

User firmware updates

Yes4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026Update Firmware button in GameSir Connect, for the controller and for the dongle.

Yes6Maker product pagenintendo.com/au/support/articles/system-update-information-for-nintendo-switchRead 5 October 2026Original 3.0.0 release notes explicitly add updates for connected controllers through Controllers and Sensors. Gamepadla exact controller specifications independently confirms firmware support.

Dimensions and weight

2 of 2 differ

Body dimensionsiController body dimensions, excluding packaging and dock. Width is side to side across the front face. Height is top to bottom across the front face. Depth is front-to-back thickness. Maker axes are reordered when needed without changing the published lengths.

Width152Height103Depth58mm(6 × 4.1 × 2.3 in)1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Physical Specs cell: 152*103*58 mm, normalized to front width, front height and thickness as for the G7 Pro.6Press articleplayday.one/2026/09/08/gamesir-g7-pro-8k-pc-colour-variants-announcedRead 14 October 2026152*103*58mm in the same spec list.

Width152Height106Depth60mm(6 × 4.2 × 2.4 in)1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Maker Size 106 x 152 x 60 mm. Reordered into front-facing width 152, height 106 and depth 60, corroborated by labelled external views.

Weight (claimed)iMaker-published controller weight with its battery. Fitted sticks, paddles or other accessories and any published tolerance are stated in the source notes. Excludes packaging and dock.

272g(9.6 oz)1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026Product Weight 272 g on the current White and Black page. The Aimlabs Edition page and the manual header say 392 g with the same 152*103*58 mm body. Breaking Point measured 267 g, so 272 g is kept. The 392 g figure looks like a package or all-contents weight.6Press articleplayday.one/2026/09/08/gamesir-g7-pro-8k-pc-colour-variants-announcedRead 14 October 2026Copies the maker spec list: Product Weight 272g / 152*103*58mm.

246g(8.7 oz)1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Maker approximately 246 g assembled controller with its internal battery. This is not a scale measurement.

Certifications

1 of 1 differ

FCC ID

Not available

BKEHAC01328Regulatory filingfccid.io/BKEHAC013/Label/Label-and-Location-3265208.pdfRead 7 October 2026Original Nintendo applicant label HAC-013_Label_170113, document 3265208. Rendered page 1 shows MOD. HAC-013 and FCC ID BKEHAC013 under the battery cover. A generic console manual misfiled in the exhibit set was excluded.

Other certifications

Not available

IC: 4360A-HAC013, Directive 2014/53/EU2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026The English compliance paragraph in original information guide FXA-HAC-A-FSS-EUR-WWW8 explicitly declares Nintendo Switch Pro Controller compliance with Directive 2014/53/EU. The separate 2024 health leaflet does not contain this paragraph. Its incorrect mapping was removed.28Regulatory filingfccid.io/BKEHAC013/Label/Label-and-Location-3265208.pdfRead 7 October 2026The original applicant label was freshly downloaded, rendered and visually read. Page 1 explicitly prints IC 4360A-HAC013 under the battery cover. The EU directive has a separate original maker guide mapping.

In the box

3 of 3 differ

In the box

Controller, Charging Dock, Wireless Receiver, Type-C Cable, D-pads x 2, Card, Sticker, User Manual1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026What's in the Box, copied verbatim without the Packaging line. The Aimlabs Edition box differs and is in its variant row.

Nintendo Switch Pro Controller, USB charging cable (HAC-010)2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026Maker accessory page explicitly includes USB charging cable. Guide identifies included HAC-010 cable. No optional console adapter, case or charging dock inferred. Documentation is available online but not asserted as an extra physical item.

Cables included

AGameSir G7 Pro 8K PC

Type	Count
USB-C	1

Source1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026One Type-C Cable. The page gives no length. GamingTrend says nearly ten feet, which is not stored.

BNintendo Switch Pro Controller

Type	Length (m)	Count
USB-A to USB-C charging cable (HAC-010)	1.5	1

Source2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 202621Retailer pagemediaworld.co.jp/products/12021930000Read 7 October 2026Added approximately 1.5 m to the existing single HAC-010 cable row. Exact OEM part identity is proved by the maker guide. Other existing cable facts are retained.

Carrying case

Not available

None30Reviewifixit.com/Device/Switch_Pro_ControllerRead 7 October 2026Exact original device page complete Box Contents lists controller and USB-C charging cable, with no carrying case. Applies to the standard reference package. Optional aftermarket cases are not included.

Warranty

1 of 2 differ

Manufacturer warranty (source market)iThe maker's warranty period for the exact SKU or configuration and market named in the source note. It applies only to that stated market, not every regional variant. Statutory consumer rights are excluded. The base term is stored. An extension that needs registration goes in the source note.

Not available

1year13Maker product pagesupport.nintendo.com/hk/switch/support/eula/repair_polichy.htmlRead 7 October 2026Exact maker warranty applicability lists Nintendo Switch Pro Controller. Period is 12 months from purchase for Hong Kong original licensed products used in Hong Kong. Source market HK only. Statutory rights and other regional accessory warranties are excluded.

Stick drift warranty

Not available

Not available

Links

Not compared

Product page

gamesir.com/products/gamesir-g7-pro-8k-pc2Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pcRead 14 October 2026

www.nintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.html1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026

Spec sheet

gamesir.com/products/gamesir-g7-pro-8k-pc/buy1Maker product pagegamesir.com/products/gamesir-g7-pro-8k-pc/buyRead 14 October 2026

www.nintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.html1Maker product pagenintendo.com/en-gb/Hardware/Accessories/Accessories-1183144.htmlRead 5 October 2026Original maker Technical Specifications table in Accessories page is the specification reference. A separate exact-model consumer datasheet was not found.

Manual

gamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-edition4Owner's manualgamesir.com/support/manuals/gamesir-g7-pro-8k-pc-champion-editionRead 14 October 2026How to Use the GameSir G7 Pro 8K PC. The subtitle covers the Aimlabs, Champion, Nioh 3 and Royal2 Editions. The PDF is an image file without text.

www.nintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdf2Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_Information_ProController_EUR.pdfRead 5 October 2026Current original maker two-page multilingual guide, FXA-HAC-A-FSS-EUR-WWW 8. English How to Use and complete Component Names and Functions read. Original 2024 health-only leaflet also read.

EPREL registration numberiId in the EU energy label database. Each size or model of a series has its own id, so it is per variant.

Not available

Not available

Both are also in the API. Back to all controllers.