Microphones / Compare

Audio-Technica AT2035 vs Shure KSM44MP

A

Product A: Audio-Technica

AT2035

32 of 61 known

Change Audio-Technica AT2035

Compare the Shure KSM44MP with

Search microphones

B

Product B: Shure

KSM44MP

37 of 61 known

Change Shure KSM44MP

Compare the Audio-Technica AT2035 with

Search microphones

All 61 fields

Every value links to where we found it.

Only differences

AAudio-Technica AT2035

BShure KSM44MP

General

5 of 8 differ

Series

20 Series6Press releaseclynemedia.com/audiotechnica/InfoComm_6_08/AT2035_AT2050/AT_AT2035_2050_InfoComm08.htmlRead 15 October 2026The release says the large-diaphragm side-address mics join the 20 Series.

KSM1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data product series: KSM.4Press releaseshure.com/en-US/newsroom/shure-unveils-ksm-studio-microphonesRead 14 October 2026The release calls the KSM32C, KSM40C and KSM44MP the new KSM condenser microphone line.

Model numbersiMaker identifiers for this exact model and its listed variants. Excludes sibling models and other generations.

AT20351Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Japanese product page, Technical data: model number AT2035.

KSM44MP, KSM44MP-CHN, KSM44MP-J1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data SKU list: KSM44MP, KSM44MP-CHN and KSM44MP-J. The two suffixed codes are regional versions of the same product.

GTIN / EAN

49613101017567Retailer pageamazon.com/dp/B002T45X1GRead 15 October 2026Item details: Global Trade Identification Number 04961310101756, shown here without the leading zero as a 13-digit code. The check digit is valid.

0424068631791Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026UPC 042406863179 in the page data for SKU KSM44MP. The EU store page has the same UPC.

AnnouncediThe maker's first announcement of this model. This is separate from first retail availability.

18 June 20086Press releaseclynemedia.com/audiotechnica/InfoComm_6_08/AT2035_AT2050/AT_AT2035_2050_InfoComm08.htmlRead 15 October 2026Audio-Technica release datelined InfoComm, Las Vegas, 2008-06-18: Audio-Technica introduces the AT2035 and AT2050.

21 January 20264Press releaseshure.com/en-US/newsroom/shure-unveils-ksm-studio-microphonesRead 14 October 2026Release dated January 21, 2026, from NAMM 2026 in Anaheim.6Press articlegearnews.comRead 14 October 2026Gearnews reports the NAMM 2026 launch of the three KSM mics.

Status

Available7Retailer pageamazon.com/dp/B002T45X1GRead 15 October 2026The listing is live with a best seller rank of 7 in Vocal Condenser Microphones.

Available1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026The US store page has Add to Cart and a New tag. The page data says availability: available.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026Review published July 2026 with a UK price of 1,059 GBP and a US price of 1,099 USD.

PredecessoriThe model this one directly replaced, in the same line, tier and size, as the maker or a trusted review names it.

Not available

Not available

SuccessoriThe model that directly replaced this one, in the same line, tier and size. A revision such as a Slim or OLED model does not count when a next generation exists.

Not available

Not available

Launch price (US)iThe maker's US launch MSRP for the stated configuration, excluding tax. Current store prices and later discounts do not qualify.

$2495Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026The release prints AT2035 $249.00 U.S. MSRP. Radio World (2008-06-26) also prints $249. US price, no sales tax.

$1,0991Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026US store price 1,099 USD, the same figure as the NAMM press release.4Press releaseshure.com/en-US/newsroom/shure-unveils-ksm-studio-microphonesRead 14 October 2026KSM44MP Large Diaphragm Multi-Pattern Condenser Microphone (1,099 USD). The release gives no euro price.

Launch price (EU)iThe maker's euro launch price for the stated configuration, including VAT as published. Current store prices and later discounts do not qualify.

Not available

€1,2096Press articlegearnews.comRead 14 October 2026Gearnews NAMM article of 2026-01-22: MSRP pricing KSM44MP 1,209 EUR. Shure's EU store shows the same 1,209 EUR. VAT treatment is not stated.

MarketsiISO country or region codes where this exact model or variant is sold. A source page's language does not establish availability.

Not available

Not available

ColoursiThe maker's own colour names

Not available

Black7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026The new bodies are a black cylindrical body.8Retailer pagethomann.de/gb/shure_ksm44mp.htmRead 14 October 2026Colour: Black.

Microphone typeiElectret condensers count as condenser.

Condenser1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data (Japanese): back electret condenser type.9Reviewmusicradar.com/reviews/audio-technica-at2035-reviewRead 15 October 2026Review of 2021-03-24: a back electret design with a permanent charge. It counts as a condenser.

Condenser1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data transducer type: condenser. The guide says condenser (externally biased).

Capsule and pickup

2 of 4 differ

Capsule sizeiDiaphragm diameter of one capsule as published. A 1-inch capsule is 25.4 mm.

Not available

25.4mm1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page text: the Shure engineered 1 inch capsule. Stored as 25.4 mm.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026The guide says 1 inch dual gold-layered Mylar diaphragms. Stored as 25.4 mm.8Retailer pagethomann.de/gb/shure_ksm44mp.htmRead 14 October 20261 inch capsule.

CapsulesiNumber of capsules. Multi-pattern USB microphones often use three.

15Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026The release describes one large diaphragm element. No capsule count is printed.

17Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026The KSM44 is an externally polarised condenser with a one-inch, dual-diaphragm capsule. One capsule with two diaphragms is stored as 1.

Polar patternsiEvery pattern the user can select. Unidirectional is used only when the maker names no exact pattern.

Cardioid2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026The Japanese sheet says unidirectional and its polar plot is a cardioid. The English datasheet and press release say cardioid.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026French edition of the Audio-Technica US datasheet, hosted by a retailer: directivity cardioid.5Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026The AT2035 has a fixed cardioid polar pattern.

Cardioid, Omnidirectional, Bidirectional1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page: selectable polar patterns cardioid, omnidirectional and bidirectional.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Specifications: polar pattern selectable, cardioid, omnidirectional, bidirectional. A three-position polar pattern switch on the body.4Press releaseshure.com/en-US/newsroom/shure-unveils-ksm-studio-microphonesRead 14 October 2026Selectable polar patterns: cardioid, omnidirectional and bidirectional.

Address typeiEnd address means you speak into the top of the microphone. Side address means you speak into its side.

Side address5Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026Large-diaphragm side-address microphones.9Reviewmusicradar.com/reviews/audio-technica-at2035-reviewRead 15 October 2026Review: a side-address, large diaphragm condenser mic with a cardioid polar pattern.

Side address1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data form factor: side-address large diaphragm. The guide says the Shure logo marks the front.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026The KSM32C is a side-address mic with a very similar look, and the 44 bears an extra switch for the polar pattern.

Sound specs

6 of 10 differ

Frequency responseiPublished acoustic range of the microphone. A sample rate does not establish it.

Min20 HzMax20 kHz1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: 20 to 20,000 Hz.

Min20 HzMax20 kHz2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Specifications: 20 to 20,000 Hz. The guide prints one range for all three patterns.8Retailer pagethomann.de/gb/shure_ksm44mp.htmRead 14 October 2026Frequency range 20 to 20,000 Hz.

Sensitivity (analog)iAnalog output level for 94 dB SPL at 1 kHz, as published in dBV. For a microphone with a switchable preamp, the bypass value is used. A value published only in mV/Pa is converted as 20 x log10(mV/Pa / 1000) and rounded to one decimal, so 1.6 mV/Pa is -55.9 dBV/Pa. The printed value goes in the source note. A sensitivity in plain dB with no reference, as many low-cost USB microphones print it, is left out.

-33dBV/Pa1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: -33 dB, with the footnote 0 dB = 1 V/1 Pa at 1 kHz. The reference of 1 V/Pa makes it dBV/Pa. The datasheet adds 22.4 mV, which is -33.0 dBV.

-30dBV/Pa1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data lists -30 dBV/Pa for cardioid and -35 dBV/Pa for omnidirectional and bidirectional. The cardioid value is stored. The guide table has the same figures.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Open circuit voltage at 1 kHz, typical: cardioid -30 dBV/Pa, omnidirectional -35 dBV/Pa, bidirectional -35 dBV/Pa. 1 Pa = 94 dB SPL. The cardioid value is stored, since cardioid is the first pattern and the one Sound On Sound quotes (32 mV/Pa).7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 202632 mV/Pa in cardioid and 18 mV/Pa in the other patterns, which matches -30 and -35 dBV/Pa.

Sensitivity (digital)iDigital output level over USB for 94 dB SPL at 1 kHz. The minimum gain value is used when several are given. The gain setting goes in the source note. On a USB-only microphone use this field only when the maker prints dBFS or ties a dBV value to the USB output, as Shure does for the MV7i. A dBV, dB re 1 V/Pa or mV/Pa value that names no USB output is left out. The printed unit and the gain go in the source note. A value printed for another reference level is converted by the level difference, so -40 dBFS at 80 dB SPL is -26 dBFS at 94 dB SPL. The printed value goes in the source note.

Not available

Not available

Max SPLiHighest sound pressure level at the source's distortion limit. The THD level and output path go in the source note. The value without a clipping protection mode such as Clipguard is used when both are given. The value with the pad off is used. When the maker lists several preamp loads, the highest load is used. The load goes in the source note. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for sensitivity.

148dB SPL1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: 148 dB SPL at 1 kHz with THD 1 percent. The spec sheet says with the pad switch off.2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026Technical data: 148 dB SPL with the pad switch off (Pad-SW OFF).

135dB SPL2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Max SPL at 1 kHz and 1 percent THD, no pad: 130 dB SPL with a 1000 ohm load and 135 dB SPL with a 2500 or 5000 ohm load. With the 15 dB pad 145 and 150 dB SPL. The 135 dB figure at 2500 ohm without the pad is stored. The guide says the preamp load should be at least 1000 ohm.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026Sound pressure levels up to 150 dB with the pad engaged for 1 percent distortion, depending on the preamp load. This matches the maker's table.

Max SPL distortion limitiThe distortion level at which the maker states the max SPL, e.g. 1, 3 or 10 % THD. Left out when the maker names none. Max SPL figures compare only at the same limit.

1%1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: maximum input sound level at 1 kHz, THD 1 percent.

1%2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026The maximum SPL table is stated at 1 kHz and 1 percent THD.

Self-noiseiEquivalent noise level, A-weighted, in dB SPL. Lower is quieter. The analog value is used when analog and digital values are both given. A value in dBV or dBFS is left out. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for max SPL.

12dB(A)4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Noise: 12 dB SPL. Footnote 1: typical, A-weighted, measured with the Audio Precision System One.

5dB(A)2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Equivalent SPL, A-weighted, typical: cardioid 5 dBA, omnidirectional 7 dBA, bidirectional 8 dBA. The cardioid value is stored.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026The KSM44MP self-noise figure is reported as 5 dBA in cardioid.

Digital noise flooriDigital noise floor of a USB microphone as printed, usually A-weighted over 20 Hz to 20 kHz. Lower is quieter. Processing that was on during the test goes in the source note. It is not self-noise.

Not available

Not available

Signal-to-noise ratioiAs published. Reference level and weighting go in the source note. The microphone's own figure, not the SNR of a built-in headphone amplifier.

82dB1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: S/N 82 dB or more at 1 kHz and 1 Pa. The datasheet prints 82 dB as a typical A-weighted figure, so 82 is stored.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Signal-to-noise ratio: 82 dB at 1 kHz and 1 Pa, footnote 1 (typical, A-weighted).

89dB2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Signal-to-noise ratio: cardioid 89 dB, omnidirectional 87 dB, bidirectional 86 dB. The guide gives no reference level. The cardioid value is stored.

Dynamic rangeiAs published. The distortion level goes in the source note. The value without a clipping protection mode is used when both are given. Use the same pad setting, preamp load and gain as for max SPL.

136dB4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Dynamic range (typical): 136 dB at 1 kHz at max SPL. 148 dB SPL minus 12 dB SPL noise gives 136 dB. The pad is off and the distortion is 1 percent THD.

130dB2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Dynamic range at 1 kHz, no pad, cardioid: 126 dB with a 1000 ohm load and 130 dB with a 2500 or 5000 ohm load. The 2500 ohm figure is stored, to match max SPL. The table names no distortion level.

Output impedanceiRated impedance of the XLR output. For a microphone with a switchable preamp, the bypass value is used. A USB-only microphone has no value here, even when the maker prints an impedance for the capsule. When the maker prints a rated and an actual impedance, as Shure does for the SM58, the rated value is stored and the actual one goes in the source note.

120Ω1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: 120 ohm balanced.

47Ω2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Output impedance 47 ohm +/- 5.8Retailer pagethomann.de/gb/shure_ksm44mp.htmRead 14 October 2026Output impedance 47 ohm.

Connectivity

0 of 7 differ

OutputsiOutputs that carry the microphone signal to a computer, interface or mixer. A headphone jack does not count. Wireless is a radio link to a receiver, such as 2.4 GHz.

XLR4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Output connector: integral 3-pin XLRM type. The balanced low-impedance output is on pins 2 and 3.

XLR1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data connector: 3-pin XLR.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Connector: three-pin professional audio (XLR), male.

Inputs for other sourcesiInputs on the microphone for another microphone or instrument, which it sends to the computer with its own signal.

Not available

Not available

USB and XLR at onceiBoth outputs carry audio at the same time.

Not available

Not available

USB portiUSB socket on the microphone. USB-B is the full-size square socket. A Micro-B socket is Micro-USB, even when the maker writes USB-B.

Not available

Not available

Cable host plugiPlug on the computer end of the included USB cable. An included adapter is listed in In the box.

Not available

Not available

Cable lengthiLength of the included USB cable.

Not available

Not available

Phantom poweriPhantom power for the XLR output. Optional means some XLR modes work without it, for example a built-in preamp in bypass. Supplies means the microphone gives 48 V phantom power to a microphone on its XLR input.

Required1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: phantom power DC 11 to 52 V, current 3.8 mA. The manual says the microphone needs phantom power.3Owner's manualaudio-technica.co.jp/pdf/support/AT2035_UM.pdfRead 15 October 2026The manual says the product needs phantom power and to connect it to a balanced microphone input that supports phantom power.

Required1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data: requires phantom power 48 V.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026For best performance the microphone needs +48 V DC phantom power. It works down to 12 VDC but does not meet all specifications. Power requirements: 48 V DC phantom power (5.9 mA), IEC 61938, P48.

Digital audio

None of 3 known

Max bit depthiHighest recording bit depth over USB.

Not available

Not available

Max sample rateiHighest recording sample rate over USB. This is not the frequency response.

Not available

Not available

32-bit float recordingiRecords over USB in 32-bit floating point. A 32-bit integer format does not count.

Not available

Not available

Monitoring

0 of 2 differ

Headphone outputiA headphone jack on the microphone.

No4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026The datasheet lists one output, the 3-pin XLR. There is no headphone output.

No1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data: headphone output false.

Zero-latency monitoringiThe headphone output plays the microphone signal directly, before it reaches the computer.

Not available

Not available

Controls and processing

1 of 2 differ

Onboard controlsiFunctions you can change on the microphone itself, by knob, button, switch or touch. Settings that exist only in the app do not count. A switch that sets preamp gain steps, such as +18 or +28 dB, counts as gain. Echo is a knob or button for an echo or reverb effect.

Not available

Polar pattern2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026A polar pattern switch with omnidirectional, cardioid and bidirectional positions, plus a pad switch (0 or -15 dB) and a three-position low frequency switch. Only the polar pattern switch belongs in this field. The pad is stored in onboard_processing.

Onboard processingiProcessing inside the microphone, analog or digital, that works without the maker's app running. A maker statement that settings are saved in the microphone counts. Effects that run only in the app on the computer do not count. An expander counts as noise gate. Clip protection such as Clipguard is clip protection. Limiter is only for a limiter the maker lists as its own effect, never both for one feature. Brand names such as APHEX or Clipguard go in the source note. Attenuation pad is a switch that lowers the capsule output, such as -15 dB. Echo is an echo or reverb effect in the microphone. Exciter or bass enhancer covers effects that add harmonics or bass, such as APHEX Aural Exciter and Big Bottom.

High-pass filter, Attenuation pad1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: low-cut switch 80 Hz, 12 dB/oct and a -10 dB pad switch. Both are switches on the microphone and need no app.

High-pass filter, Attenuation pad2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Three-position frequency response switch: flat, 6 dB per octave rolloff below 115 Hz or 18 dB per octave cutoff at 80 Hz. The guide also lists a subsonic filter below 17 Hz. The 0 or -15 dB attenuation switch is stored as pad.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026The mics keep the 15 dB pad and high-pass filter options. The two high-pass settings are an 18 dB per octave slope at 80 Hz and 6 dB per octave with the -3 dB point at 115 Hz.

Mounting and accessories

1 of 4 differ

Mount threadsiStand threads the microphone or its included mount accepts, also with an included adapter.

5/8 inch, 3/8 inch1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Accessories: shock mount, mic pouch and a 3/8-5/8 conversion screw. The datasheet gives the shock mount thread as 5/8 inch-27 and the adapter as 5/8 inch-27 to 3/8 inch-16.

5/8 inch, 3/8 inch9Retailer pagegoknight.com/shure-aksm40-44-sm-shockmount-for-ksm40c-and-ksm44mpRead 14 October 2026Retailer spec of the AKSM40/44-SM shock mount, which ships with the KSM44MP: mounting thread size 5/8 in-27 female, 3/8 in-16 female with the included adapter.

Shock mountiInternal is suspension inside the body. Included is a separate shock mount in the box. A cradle or ring mount that comes fitted to the microphone or its stand is included, even when the maker calls it built-in. A microphone with internal suspension and a separate shock mount in the box is included.

Included1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Accessories include a shock mount. The datasheet names it AT8458.9Reviewmusicradar.com/reviews/audio-technica-at2035-reviewRead 15 October 2026Review pros list: includes shock mount. Its spec list prints noise 12 dB SPL and weight 403 g, as the datasheet does.

Included1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Box list: 1 Shock Mount and 1 set of 8 replacement bands.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Accessories and replacement parts: AKSM40/44-SM shock mount for KSM40C and KSM44MP and AKSMEB elastic bands for KSM shock mounts. Version 0.2 (2026-A) of the guide.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026The KSM44MP and KSM40C ship with an elastic shockmount and a hard stand mount.

Pop filteriPop protection built in or in the box.

Not available

External screen1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Box list: 1 Magnetic Pop Filter. The page says the shock mount and detachable pop filter dampen rumble, vibration and plosives. Bonedo and Sound On Sound describe a metal magnetic screen.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Attach the pop filter: the magnets hold it on the shock mount. Accessory A4PF magnetic pop filter.4Press releaseshure.com/en-US/newsroom/shure-unveils-ksm-studio-microphonesRead 14 October 2026Curved magnetic pop filters ship with the line.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026A pop shield fixes magnetically to the upper ring of the shockmount.

Desk stand includediA desk stand or base in the box. A yoke alone does not count. A boom arm does not count either. In the box names it.

No1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026The accessories list has a shock mount, a pouch and an adapter. There is no stand. Stands such as AT8652 and AT8653S are sold separately.

No1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026The box list names no stand or base. A shock mount, a swivel-mount mic clamp, a pop filter, a case, bands and a threaded adapter are listed. A clamp is not a desk stand.

Design and build

1 of 3 differ

Housing material

Not available

Machined, anodized aluminum alloy1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data lists a metal housing. The guide says machined, anodized aluminum alloy.2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Housing: machined, anodized aluminum alloy.4Press releaseshure.com/en-US/newsroom/shure-unveils-ksm-studio-microphonesRead 14 October 2026Lightweight, all-metal construction.7Reviewsoundonsound.com/reviews/shure-ksm40c-ksm44mp-ksm32cRead 14 October 2026The headbasket is formed from a single piece of metal. The body is a black cylinder.

RGB lightingiDecorative lighting. Status and mute lights alone do not count. RGB lighting is lighting with no function. A level meter or mute indicator is not RGB lighting, even when its colour can be chosen. Lighting that changes colour on its own counts, even when it also turns off on mute.

Not available

Not available

Lighting zonesiIndependently controllable lighting areas.

Not available

Not available

Software

None of 2 known

SoftwareiThe maker's app for the microphone.

Not available

Not available

User firmware updatesiA public updater or a documented firmware update procedure exists for this exact model.

Not available

Not available

Compatibility

None of 2 known

Works withiOperating systems the maker lists for USB audio. App support can be narrower.

Not available

Not available

ConsolesiConsoles the maker lists for USB audio.

Not available

Not available

Dimensions and weight

2 of 3 differ

Microphone dimensionsiMicrophone body without a stand or a detachable shock mount. A fixed yoke is included. Width is left to right as seen by the speaker, height is bottom to top in normal use and depth is front to back. Orient the microphone as in use on its yoke or stand. Depth is the direction it points at the speaker, height is up and width is across. An upright side-address microphone has its length as height. An end-address microphone has its length as depth, also when it is held in the hand. A round microphone with only a length and a diameter uses the diameter for the other two sides. The source note states the mapping.

Width52Height170Depth52mm(2 × 6.7 × 2 in)2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026Drawing: 171 mm overall length and 52 mm diameter, with the XLR connector at 19 and 21 mm. The French datasheet prints 170.0 mm and 52.0 mm and is stored. The microphone is side-address and stands upright, so the length is the height and the diameter is stored for width and depth.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Length 170.0 mm (6.69 in), maximum body diameter 52.0 mm (2.05 in). Thomann prints the same figures.8Retailer pagethomann.co.uk/audio_technica_at2035.htmRead 15 October 2026Thomann prints 52.0 x 170.0 mm and 403 g, which match the datasheet. It prints a maximum SPL of 149 dB, which is not used because Audio-Technica prints 148 dB.

Width47.6Height171.1Depth47.6mm(1.9 × 6.7 × 1.9 in)2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Dimensions 47.6 x 171.1 mm (1.87 x 6.74 in). The microphone is spoken into from its side, so 171.1 mm is the length and the height, and 47.6 mm the diameter, used for width and depth. Thomann prints the same size as D x H 48 x 171 mm.8Retailer pagethomann.de/gb/shure_ksm44mp.htmRead 14 October 2026Dimensions (D x H): 48 x 171 mm, which matches the maker's 47.6 x 171.1 mm.

Microphone weightiWithout stand, detachable shock mount and cable. A fixed yoke is included.

403g(14.2 oz)1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: weight 403 g.

295g(10.4 oz)1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Page data weight 295 g (0.65 lb).2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026Weight 295 g, the microphone without the shock mount.8Retailer pagethomann.de/gb/shure_ksm44mp.htmRead 14 October 2026Weight: 0.295 kg.

Weight with standiWith the included stand or mount attached, without the cable. An included shock mount between the microphone and the stand counts.

Not available

Not available

Certifications

1 of 1 differ

Other certifications

Not available

CE, UKCA2Owner's manualpubs.shure.com/view/guide/KSM44MP/en-US.pdfRead 14 October 2026The guide has a CE notice and a UKCA notice for the CE and UKCA marks.

In the box

1 of 1 differ

In the box

AT2035 microphone, AT8458 shock mount for 5/8"-27 threaded stands, 5/8"-27 to 3/8"-16 threaded adapter, Protective pouch1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Accessories: shock mount, mic pouch and conversion screw 3/8-5/8. Sold separately: windscreen AT8178, pop filter AT-PF2 and shock mount AT8458a.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Included accessories: AT8458 shock mount for 5/8 inch-27 threaded stands, a 5/8 inch-27 to 3/8 inch-16 threaded adapter and a soft protective pouch. The list is translated from the French. The microphone itself is added to the list.

KSM44MP Dual Diaphragm Multi-Pattern Condenser Microphone, Shock Mount, Magnetic Pop Filter, Premium Zippered Carrying Case, Swivel-Mount Mic Clamp (Hard Mount), Set Replacement Shock Mount Bands (8), Threaded Adapter1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026Box list as printed, each with quantity 1. The set of bands holds 8.8Retailer pagethomann.de/gb/shure_ksm44mp.htmRead 14 October 2026Includes 1 shock mount, 1 magnetic pop filter, 1 zip-up case, 1 swivel microphone clip, 8 replacement straps for the shock mount and 1 thread adapter. This matches the maker's box list.

Links

Not compared

Product page

www.audio-technica.co.jp/product/AT20351Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026

www.shure.com/en-US/products/microphones/ksm44mp1Maker product pageshure.com/en-US/products/microphones/ksm44mpRead 14 October 2026

Spec sheet

www.audio-technica.co.jp/pdf/support/AT2035_SS.pdf2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026Japanese spec sheet dated 2008-11-01, one page with a dimension drawing, frequency response, polar pattern and technical data.

Not available

Manual

www.audio-technica.co.jp/pdf/support/AT2035_UM.pdf3Owner's manualaudio-technica.co.jp/pdf/support/AT2035_UM.pdfRead 15 October 2026Japanese user manual, one page, dated 2012-06.

www.shure.com/en-US/docs/guide/KSM44MP3Owner's manualshure.com/en-US/docs/guide/KSM44MPRead 14 October 2026Shure online user guide for the KSM44MP. The page builds its text with scripts, so the specs were read from the PDF edition.

EPREL registration numberiId in the EU energy label database. Each size or model of a series has its own id, so it is per variant.

Not available

Not available

Warranty

1 of 1 differ

Manufacturer warranty (source market)iThe maker's warranty period for the exact SKU or configuration and market named in the source note. It applies only to that stated market, not every regional variant. Statutory consumer rights are excluded. The base term is stored. An extension that needs registration goes in the source note.

2years7Retailer pageamazon.com/dp/B002T45X1GRead 15 October 2026Warranty description: 2 year warranty on parts and labor. Kraft Music prints the A.T.U.S. limited 2-year warranty for purchases from an authorized US dealer. No registration is mentioned.

Not available

Both are also in the API. Back to all microphones.