Microphones / Compare

Audio-Technica AT2035 vs RØDE NT1 Signature Series

A

Product A: Audio-Technica

AT2035

32 of 61 known

Change Audio-Technica AT2035

Compare the RØDE NT1 Signature Series with

Search microphones

B

Product B: RØDE

NT1 Signature Series

33 of 61 known

Change RØDE NT1 Signature Series

Compare the Audio-Technica AT2035 with

Search microphones

All 61 fields

Every value links to where we found it.

Only differences

AAudio-Technica AT2035

BRØDE NT1 Signature Series

General

5 of 8 differ

Series

20 Series6Press releaseclynemedia.com/audiotechnica/InfoComm_6_08/AT2035_AT2050/AT_AT2035_2050_InfoComm08.htmlRead 15 October 2026The release says the large-diaphragm side-address mics join the 20 Series.

NT11Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The product line is the NT1 range. The page title is NT1 Signature Series.

Model numbersiMaker identifiers for this exact model and its listed variants. Excludes sibling models and other generations.

AT20351Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Japanese product page, Technical data: model number AT2035.

NT1SIGNATUREBLACK, NT1SIGNATUREWHITE, NT1SIGNATUREORANGE, NT1SIGNATURECOBALT, NT1SIGNATURERED, NT1SIGNATUREPINK, NT1SIGNATUREPURPLE, NT1SIGNATUREBLUE, NT1SIGNATUREGREEN, NT1SIGNATUREYELLOW1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Variant SKUs in the page data: NT1SIGNATUREBLACK, NT1SIGNATUREWHITE, NT1SIGNATUREORANGE, NT1SIGNATURECOBALT, NT1SIGNATURERED, NT1SIGNATUREPINK, NT1SIGNATUREPURPLE, NT1SIGNATUREBLUE, NT1SIGNATUREGREEN and NT1SIGNATUREYELLOW.5Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026Store SKUs for the ten colour variants.

GTIN / EAN

49613101017567Retailer pageamazon.com/dp/B002T45X1GRead 15 October 2026Item details: Global Trade Identification Number 04961310101756, shown here without the leading zero as a 13-digit code. The check digit is valid.

0698813013982, 0698813014941, 0698813015160, 0698813014965, 0698813014002, 0698813014064, 0698813014088, 0698813014040, 0698813014026, 06988130149275Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026Store barcodes are 12-digit UPC-A codes such as 698813013982 for black. They are written here as GTIN-13 with a leading zero: black 0698813013982, white 0698813014941, orange 0698813015160, cobalt 0698813014965, red 0698813014002, pink 0698813014064, purple 0698813014088, blue 0698813014040, green 0698813014026 and yellow 0698813014927.

AnnouncediThe maker's first announcement of this model. This is separate from first retail availability.

18 June 20086Press releaseclynemedia.com/audiotechnica/InfoComm_6_08/AT2035_AT2050/AT_AT2035_2050_InfoComm08.htmlRead 15 October 2026Audio-Technica release datelined InfoComm, Las Vegas, 2008-06-18: Audio-Technica introduces the AT2035 and AT2050.

7 November 20236Press articlemixonline.comRead 15 October 2026RØDE release reproduced by Mix, dateline Sydney, 2023-11-07.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Sonicstate repeats the RØDE release on 2023-11-07.

Status

Available7Retailer pageamazon.com/dp/B002T45X1GRead 15 October 2026The listing is live with a best seller rank of 7 in Vocal Condenser Microphones.

Available1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The US page offers the microphone in all ten colours at 159 USD and the store shows each as in stock.5Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026The product is published and every colour variant is available.6Press articlemixonline.comRead 15 October 2026Available today, as of 2023-11-07.

PredecessoriThe model this one directly replaced, in the same line, tier and size, as the maker or a trusted review names it.

Not available

Not available

SuccessoriThe model that directly replaced this one, in the same line, tier and size. A revision such as a Slim or OLED model does not count when a next generation exists.

Not available

Not available

Launch price (US)iThe maker's US launch MSRP for the stated configuration, excluding tax. Current store prices and later discounts do not qualify.

$2495Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026The release prints AT2035 $249.00 U.S. MSRP. Radio World (2008-06-26) also prints $249. US price, no sales tax.

$1596Press articlemixonline.comRead 15 October 2026The NT1 Signature Series runs US $159 and is available today.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Pricing and availability: $159.

Launch price (EU)iThe maker's euro launch price for the stated configuration, including VAT as published. Current store prices and later discounts do not qualify.

Not available

€1898Reviewdelamar.de/test/rode-nt1-signature-series-testRead 15 October 2026German review of 2023-12-21: price 189.00 Euro and UVP (recommended retail price) 189.00 Euro, incl. VAT. The delamar product page says the microphone is available from now on at an UVP of 189 Euro. RØDE publishes no euro launch price in its release.

MarketsiISO country or region codes where this exact model or variant is sold. A source page's language does not establish availability.

Not available

Not available

ColoursiThe maker's own colour names

Not available

Black, White, Orange, Cobalt, Red, Pink, Purple, Blue, Green, Yellow1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The page data lists ten colours: Black, Blue, Green, Orange, Pink, Purple, Red, Yellow, Cobalt and White.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The colour strip shows Black, Blue, Green, Purple, Pink, Red, Yellow, Orange, Cobalt Blue and White. The text of this sheet still says six colours.5Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026Color option values: Black, White, Orange, Cobalt, Red, Pink, Purple, Blue, Green, Yellow.6Press articlemixonline.comRead 15 October 2026At launch: black plus red, green, purple, pink and blue. White, orange, cobalt and yellow came later.

Microphone typeiElectret condensers count as condenser.

Condenser1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data (Japanese): back electret condenser type.9Reviewmusicradar.com/reviews/audio-technica-at2035-reviewRead 15 October 2026Review of 2021-03-24: a back electret design with a permanent charge. It counts as a condenser.

Condenser1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: large-diaphragm cardioid condenser microphone with an HF6 1-inch true condenser capsule.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026

Capsule and pickup

1 of 4 differ

Capsule sizeiDiaphragm diameter of one capsule as published. A 1-inch capsule is 25.4 mm.

Not available

25.4mm1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: HF6 1-inch true condenser capsule. 1 inch is 25.4 mm.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Acoustic and electrical specifications: Capsule 1.00 inch, which is 25.4 mm.

CapsulesiNumber of capsules. Multi-pattern USB microphones often use three.

15Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026The release describes one large diaphragm element. No capsule count is printed.

12Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The sheet names one HF6 1-inch capsule and one cardioid pattern. It prints no capsule count.

Polar patternsiEvery pattern the user can select. Unidirectional is used only when the maker names no exact pattern.

Cardioid2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026The Japanese sheet says unidirectional and its polar plot is a cardioid. The English datasheet and press release say cardioid.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026French edition of the Audio-Technica US datasheet, hosted by a retailer: directivity cardioid.5Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026The AT2035 has a fixed cardioid polar pattern.

Cardioid1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: tight cardioid polar pattern.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Polar Pattern: Cardioid.

Address typeiEnd address means you speak into the top of the microphone. Side address means you speak into its side.

Side address5Press releaseclynemedia.com/audiotechnica/AT2035__AT2050/AT_AT2035_2050.htmlRead 15 October 2026Large-diaphragm side-address microphones.9Reviewmusicradar.com/reviews/audio-technica-at2035-reviewRead 15 October 2026Review: a side-address, large diaphragm condenser mic with a cardioid polar pattern.

Side address1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The spec table lists Address Type Side.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Address Type: Side.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The guide says the NT1 Signature Series is a side-address microphone with a tight cardioid polar pattern.

Sound specs

7 of 10 differ

Frequency responseiPublished acoustic range of the microphone. A sample rate does not establish it.

Min20 HzMax20 kHz1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: 20 to 20,000 Hz.

Min20 HzMax20 kHz1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 20Hz - 20kHz.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Frequency Range: 20Hz - 20kHz.

Sensitivity (analog)iAnalog output level for 94 dB SPL at 1 kHz, as published in dBV. For a microphone with a switchable preamp, the bypass value is used. A value published only in mV/Pa is converted as 20 x log10(mV/Pa / 1000) and rounded to one decimal, so 1.6 mV/Pa is -55.9 dBV/Pa. The printed value goes in the source note. A sensitivity in plain dB with no reference, as many low-cost USB microphones print it, is left out.

-33dBV/Pa1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: -33 dB, with the footnote 0 dB = 1 V/1 Pa at 1 kHz. The reference of 1 V/Pa makes it dBV/Pa. The datasheet adds 22.4 mV, which is -33.0 dBV.

-32dBV/Pa1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz.

Sensitivity (digital)iDigital output level over USB for 94 dB SPL at 1 kHz. The minimum gain value is used when several are given. The gain setting goes in the source note. On a USB-only microphone use this field only when the maker prints dBFS or ties a dBV value to the USB output, as Shure does for the MV7i. A dBV, dB re 1 V/Pa or mV/Pa value that names no USB output is left out. The printed unit and the gain go in the source note. A value printed for another reference level is converted by the level difference, so -40 dBFS at 80 dB SPL is -26 dBFS at 94 dB SPL. The printed value goes in the source note.

Not available

Not available

Max SPLiHighest sound pressure level at the source's distortion limit. The THD level and output path go in the source note. The value without a clipping protection mode such as Clipguard is used when both are given. The value with the pad off is used. When the maker lists several preamp loads, the highest load is used. The load goes in the source note. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for sensitivity.

148dB SPL1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: 148 dB SPL at 1 kHz with THD 1 percent. The spec sheet says with the pad switch off.2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026Technical data: 148 dB SPL with the pad switch off (Pad-SW OFF).

142dB SPL1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 142 dB SPL. The page prints no THD level.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Maximum SPL: 142 dB SPL. No THD level is printed.

Max SPL distortion limitiThe distortion level at which the maker states the max SPL, e.g. 1, 3 or 10 % THD. Left out when the maker names none. Max SPL figures compare only at the same limit.

1%1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: maximum input sound level at 1 kHz, THD 1 percent.

Not available

Self-noiseiEquivalent noise level, A-weighted, in dB SPL. Lower is quieter. The analog value is used when analog and digital values are both given. A value in dBV or dBFS is left out. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for max SPL.

12dB(A)4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Noise: 12 dB SPL. Footnote 1: typical, A-weighted, measured with the Audio Precision System One.

4dB(A)1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Equivalent Noise (A-Weighted) 4dBA.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Equivalent Noise (A-Weighted): 4dBA.

Digital noise flooriDigital noise floor of a USB microphone as printed, usually A-weighted over 20 Hz to 20 kHz. Lower is quieter. Processing that was on during the test goes in the source note. It is not self-noise.

Not available

Not available

Signal-to-noise ratioiAs published. Reference level and weighting go in the source note. The microphone's own figure, not the SNR of a built-in headphone amplifier.

82dB1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: S/N 82 dB or more at 1 kHz and 1 Pa. The datasheet prints 82 dB as a typical A-weighted figure, so 82 is stored.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Signal-to-noise ratio: 82 dB at 1 kHz and 1 Pa, footnote 1 (typical, A-weighted).

Not available

Dynamic rangeiAs published. The distortion level goes in the source note. The value without a clipping protection mode is used when both are given. Use the same pad setting, preamp load and gain as for max SPL.

136dB4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Dynamic range (typical): 136 dB at 1 kHz at max SPL. 148 dB SPL minus 12 dB SPL noise gives 136 dB. The pad is off and the distortion is 1 percent THD.

Not available

Output impedanceiRated impedance of the XLR output. For a microphone with a switchable preamp, the bypass value is used. A USB-only microphone has no value here, even when the maker prints an impedance for the capsule. When the maker prints a rated and an actual impedance, as Shure does for the SM58, the rated value is stored and the actual one goes in the source note.

120Ω1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: 120 ohm balanced.

100Ω1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 100 ohm.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Output Impedance: 100 ohm.

Connectivity

0 of 7 differ

OutputsiOutputs that carry the microphone signal to a computer, interface or mixer. A headphone jack does not count. Wireless is a radio link to a receiver, such as 2.4 GHz.

XLR4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Output connector: integral 3-pin XLRM type. The balanced low-impedance output is on pins 2 and 3.

XLR1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Analogue Output Connection 3-pin XLR.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Analogue Output Connection: 3-pin XLR. No other output is listed.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 6: connect the included XLR cable to the base of the microphone.

Inputs for other sourcesiInputs on the microphone for another microphone or instrument, which it sends to the computer with its own signal.

Not available

Not available

USB and XLR at onceiBoth outputs carry audio at the same time.

Not available

Not available

USB portiUSB socket on the microphone. USB-B is the full-size square socket. A Micro-B socket is Micro-USB, even when the maker writes USB-B.

Not available

Not available

Cable host plugiPlug on the computer end of the included USB cable. An included adapter is listed in In the box.

Not available

Not available

Cable lengthiLength of the included USB cable.

Not available

Not available

Phantom poweriPhantom power for the XLR output. Optional means some XLR modes work without it, for example a built-in preamp in bypass. Supplies means the microphone gives 48 V phantom power to a microphone on its XLR input.

Required1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: phantom power DC 11 to 52 V, current 3.8 mA. The manual says the microphone needs phantom power.3Owner's manualaudio-technica.co.jp/pdf/support/AT2035_UM.pdfRead 15 October 2026The manual says the product needs phantom power and to connect it to a balanced microphone input that supports phantom power.

Required1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Analogue Power Requirements P48.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Analogue Power Requirements: P48.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 7: enable 48V phantom power (P48) on your device.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026For the microphone to function you need to supply 48V phantom power.

Digital audio

None of 3 known

Max bit depthiHighest recording bit depth over USB.

Not available

Not available

Max sample rateiHighest recording sample rate over USB. This is not the frequency response.

Not available

Not available

32-bit float recordingiRecords over USB in 32-bit floating point. A 32-bit integer format does not count.

Not available

Not available

Monitoring

0 of 2 differ

Headphone outputiA headphone jack on the microphone.

No4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026The datasheet lists one output, the 3-pin XLR. There is no headphone output.

No2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The only output listed is the 3-pin XLR. No headphone output is listed.

Zero-latency monitoringiThe headphone output plays the microphone signal directly, before it reaches the computer.

Not available

Not available

Controls and processing

1 of 2 differ

Onboard controlsiFunctions you can change on the microphone itself, by knob, button, switch or touch. Settings that exist only in the app do not count. A switch that sets preamp gain steps, such as +18 or +28 dB, counts as gain. Echo is a knob or button for an echo or reverb effect.

Not available

Not available

Onboard processingiProcessing inside the microphone, analog or digital, that works without the maker's app running. A maker statement that settings are saved in the microphone counts. Effects that run only in the app on the computer do not count. An expander counts as noise gate. Clip protection such as Clipguard is clip protection. Limiter is only for a limiter the maker lists as its own effect, never both for one feature. Brand names such as APHEX or Clipguard go in the source note. Attenuation pad is a switch that lowers the capsule output, such as -15 dB. Echo is an echo or reverb effect in the microphone. Exciter or bass enhancer covers effects that add harmonics or bass, such as APHEX Aural Exciter and Big Bottom.

High-pass filter, Attenuation pad1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: low-cut switch 80 Hz, 12 dB/oct and a -10 dB pad switch. Both are switches on the microphone and need no app.

Not available

Mounting and accessories

1 of 4 differ

Mount threadsiStand threads the microphone or its included mount accepts, also with an included adapter.

5/8 inch, 3/8 inch1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Accessories: shock mount, mic pouch and a 3/8-5/8 conversion screw. The datasheet gives the shock mount thread as 5/8 inch-27 and the adapter as 5/8 inch-27 to 3/8 inch-16.

5/8 inch, 3/8 inch4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The SM6 shock mount features both 5/8-inch and 3/8-inch thread sizes.

Shock mountiInternal is suspension inside the body. Included is a separate shock mount in the box. A cradle or ring mount that comes fitted to the microphone or its stand is included, even when the maker calls it built-in. A microphone with internal suspension and a separate shock mount in the box is included.

Included1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Accessories include a shock mount. The datasheet names it AT8458.9Reviewmusicradar.com/reviews/audio-technica-at2035-reviewRead 15 October 2026Review pros list: includes shock mount. Its spec list prints noise 12 dB SPL and weight 403 g, as the datasheet does.

Included1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: a studio-grade SM6 shock mount is in the box. The microphone sits inside it.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Text: a studio-grade shock mount is included. The drawing labels it SM6.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 2: place the microphone inside the shock mount.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The SM6 shock mount and pop filter come in the box.

Pop filteriPop protection built in or in the box.

Not available

External screen1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page icon: Shock Mount and Detachable Pop Filter. The user guide describes a pop filter on a telescopic arm that screws into the shock mount.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Text: a studio-grade shock mount, pop filter and XLR cable are included.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 1: screw the pop filter into the mounting thread of the shock mount with the L-shaped bracket.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The pop filter has a telescopic arm and screws into a socket on the shock mount.

Desk stand includediA desk stand or base in the box. A yoke alone does not count. A boom arm does not count either. In the box names it.

No1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026The accessories list has a shock mount, a pouch and an adapter. There is no stand. Stands such as AT8652 and AT8653S are sold separately.

No2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The what's in the box drawing shows the microphone, the SM6 shock mount and the XLR cable. No stand is listed.

Design and build

1 of 3 differ

Housing material

Not available

Machined high-grade aluminium1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page text: a rugged body machined from high-grade aluminium.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Rugged aluminium body and high-grade finishes.

RGB lightingiDecorative lighting. Status and mute lights alone do not count. RGB lighting is lighting with no function. A level meter or mute indicator is not RGB lighting, even when its colour can be chosen. Lighting that changes colour on its own counts, even when it also turns off on mute.

Not available

Not available

Lighting zonesiIndependently controllable lighting areas.

Not available

Not available

Software

None of 2 known

SoftwareiThe maker's app for the microphone.

Not available

Not available

User firmware updatesiA public updater or a documented firmware update procedure exists for this exact model.

Not available

Not available

Compatibility

None of 2 known

Works withiOperating systems the maker lists for USB audio. App support can be narrower.

Not available

Not available

ConsolesiConsoles the maker lists for USB audio.

Not available

Not available

Dimensions and weight

2 of 3 differ

Microphone dimensionsiMicrophone body without a stand or a detachable shock mount. A fixed yoke is included. Width is left to right as seen by the speaker, height is bottom to top in normal use and depth is front to back. Orient the microphone as in use on its yoke or stand. Depth is the direction it points at the speaker, height is up and width is across. An upright side-address microphone has its length as height. An end-address microphone has its length as depth, also when it is held in the hand. A round microphone with only a length and a diameter uses the diameter for the other two sides. The source note states the mapping.

Width52Height170Depth52mm(2 × 6.7 × 2 in)2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026Drawing: 171 mm overall length and 52 mm diameter, with the XLR connector at 19 and 21 mm. The French datasheet prints 170.0 mm and 52.0 mm and is stored. The microphone is side-address and stands upright, so the length is the height and the diameter is stored for width and depth.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Length 170.0 mm (6.69 in), maximum body diameter 52.0 mm (2.05 in). Thomann prints the same figures.8Retailer pagethomann.co.uk/audio_technica_at2035.htmRead 15 October 2026Thomann prints 52.0 x 170.0 mm and 403 g, which match the datasheet. It prints a maximum SPL of 149 dB, which is not used because Audio-Technica prints 148 dB.

Width52Height189Depth52mm(2 × 7.4 × 2 in)1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Length 52, Width 52, Height 189 mm. The microphone is side-address and stands upright, so the length of 189 mm is the height and the 52 mm diameter is both width and depth.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Mechanical specifications: Length 52, Width 52, Height 189 mm.

Microphone weightiWithout stand, detachable shock mount and cable. A fixed yoke is included.

403g(14.2 oz)1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Technical data: weight 403 g.

313g(11 oz)1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 313 g.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Mechanical specifications: Weight 313 grams.

Weight with standiWith the included stand or mount attached, without the cable. An included shock mount between the microphone and the stand counts.

Not available

Not available

Certifications

1 of 1 differ

Other certifications

Not available

FCC Part 15 Class B, CAN ICES-003 (B) / NMB-003 (B), KC (South Korea)3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Compliance page: FCC Part 15 Class B digital device, CAN ICES-003 (B) / NMB-003 (B) and a South Korea KC entry (R-R-R72-NT1SIGNATURE).

In the box

1 of 1 differ

In the box

AT2035 microphone, AT8458 shock mount for 5/8"-27 threaded stands, 5/8"-27 to 3/8"-16 threaded adapter, Protective pouch1Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026Accessories: shock mount, mic pouch and conversion screw 3/8-5/8. Sold separately: windscreen AT8178, pop filter AT-PF2 and shock mount AT8458a.4Maker spec sheet (PDF)la-bs.com/Objets/AT2035_dt.pdfRead 15 October 2026Included accessories: AT8458 shock mount for 5/8 inch-27 threaded stands, a 5/8 inch-27 to 3/8 inch-16 threaded adapter and a soft protective pouch. The list is translated from the French. The microphone itself is added to the list.

NT1 Signature Series Microphone, SM6 Studio Microphone Shock Mount, Pop Filter, XLR Cable for NT1 Signature Series1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026What's in the box in the page data: NT1 Signature Series (1), SM6 Studio Microphone Shock Mount (1) and XLR Cable for NT1 Signature Series (1). The page and the datasheet also say a pop filter is included.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026What's in the box drawing: SM6, NT1 Signature Series Microphone and XLR Cable. The text says a studio-grade shock mount, pop filter and XLR cable come with it.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026A studio-quality shock mount, pop filter and XLR cable are included.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Each microphone comes with a studio-grade shock mount, a pop filter and a premium XLR cable.

Links

Not compared

Product page

www.audio-technica.co.jp/product/AT20351Maker product pageaudio-technica.co.jp/product/AT2035Read 15 October 2026

rode.com/en-us/products/nt1-signature-series1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The maker's US product page.

Spec sheet

www.audio-technica.co.jp/pdf/support/AT2035_SS.pdf2Maker spec sheet (PDF)audio-technica.co.jp/pdf/support/AT2035_SS.pdfRead 15 October 2026Japanese spec sheet dated 2008-11-01, one page with a dimension drawing, frequency response, polar pattern and technical data.

edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdf1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Datasheet linked from the Resources section of the page.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Datasheet of the NT1 Signature Series, page 1 and 2.

Manual

www.audio-technica.co.jp/pdf/support/AT2035_UM.pdf3Owner's manualaudio-technica.co.jp/pdf/support/AT2035_UM.pdfRead 15 October 2026Japanese user manual, one page, dated 2012-06.

edge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdf1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The Product Manual link of the page is the quick start guide.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Quick start guide, part 0927-0876-02-01, 9 pages.

EPREL registration numberiId in the EU energy label database. Each size or model of a series has its own id, so it is per variant.

Not available

Not available

Warranty

1 of 1 differ

Manufacturer warranty (source market)iThe maker's warranty period for the exact SKU or configuration and market named in the source note. It applies only to that stated market, not every regional variant. Statutory consumer rights are excluded. The base term is stored. An extension that needs registration goes in the source note.

2years7Retailer pageamazon.com/dp/B002T45X1GRead 15 October 2026Warranty description: 2 year warranty on parts and labor. Kraft Music prints the A.T.U.S. limited 2-year warranty for purchases from an authorized US dealer. No registration is mentioned.

Not available

Both are also in the API. Back to all microphones.