arkivoAPI

Earbuds / Compare

Bowers & Wilkins Pi8 vs Jabra Elite 10 Gen 2

68 of 157 fields differ

Download CSVDownload JSON
  • 40 different values
  • 28 known for one only
  • 17 the same
  • 72 missing for both

Biggest differences

Each bar uses the scale of all 138 earbuds.

  1. Quick chargeA: 2hB: 1hBowers & Wilkins is 1 h higher.
  2. With caseA: 20hB: 36hJabra is 16 h higher.
  3. Total with case and ANC (claimed)A: 20hB: 27hJabra is 7 h higher.
  4. Battery lifeA: 6.5hB: 8hJabra is 1.5 h higher.

Weight

0 to 80 g

Weight per bud
A7g
B5.5g
Case weight
A46g
B46.6g

All 166 fields

Every value links to where we found it.

ABowers & Wilkins Pi8
BJabra Elite 10 Gen 2

General

8 of 8 differ
GTIN / EAN
Not available
Not available
Predecessor
Not available
Not available
Successor
Not available
Not available
Launch price (EU)
Not available
Markets
Not available

Design

2 of 4 differ
RGB lighting
Not available
Not available

Drivers and sound

7 of 17 differ
Driver size
12mm
10mm
Drivers per bud
1
1
Frequency response
Not available
Impedance
Not available
Not available
Sensitivity
Not available
Not available
Sensitivity reference
Not available
Not available
Max sample rate
Not available
Adaptive EQ
Not available
Not available
Personalised sound
Not available
Not available
Onboard EQ
Not available
Not available
Custom EQ bands
Not available
EQ presets
Not available
Not available
Volume limit
Not available
Not available

Spatial audio

2 of 2 differ
Spatial audio
Not available

Noise cancelling

2 of 11 differ
ANC type
Not available
Not available
ANC microphones in both earbuds
Not available
Not available
ANC levels
Not available
Not available
ANC attenuation (claimed)
Not available
Not available
Automatic ANC and transparency blend
Not available
Not available
Conversation detection
Not available
Not available
Wind noise reduction
Not available

Measured

4 of 23 differ
Frequency response notes (measured)
Warm sound signature with emphasised bass. SoundGuys measured the Pi8 on firmware 1.0.16.18 against its own preference curve. Bass runs about 5 dB above the target from 20 to 50 Hz, the response peaks about 9 dB above the target at 3.15 kHz and sits about 14 dB below the target at 20 kHz. These are local peaks, not regional averages.9Measurementsoundguys.com/bowers-wilkins-pi8-review-124027Read 15 October 2026SoundGuys lab response table for the Pi8 on the SoundGuys Headphone Preference Curve, measured on a B&K 5128 fixture per its How We Test method. Values read from the product page lab data. SoundGuys lists the signature as warm and says the Pi8 have more bass emphasis than expected.
Bass amount (measured)
Not available
Not available
Treble amount (measured)
Not available
Not available
Deviation from target (measured)
Not available
Not available
Consistency between fittings (measured)
Not available
Not available
Harmonic distortion (measured)
Not available
Not available
Sound leakage (measured)
Not available
Not available
Noise isolation (measured)
Not available
Not available
Noise isolation, best (measured)
Not available
Not available
Passive isolation (measured)
Not available
Not available
Call quality notes (measured)
Voices are reproduced accurately in SoundGuys recordings. Background noise rejection is not exceptional, so some environmental noise leaks through, but each voice stays intelligible. The recordings cover ideal, office, street, windy and reverberant conditions.9Measurementsoundguys.com/bowers-wilkins-pi8-review-124027Read 15 October 2026SoundGuys microphone demonstrations in ideal, office, street, windy and reverberant conditions. The review text says the microphones work well in a variety of environments but background noise rejection is not exceptional. No numeric result is stored.
Six-microphone array. The reviewer rates wind and background noise rejection as excellent. Test recordings cover ideal, office, street, windy and reverberant conditions.3Measurementsoundguys.com/jabra-elite-10-gen-2-review-117650Read 13 October 2026Lab demo recordings in ideal, office, street, windy and reverberant conditions.
Mic low-frequency extension (measured)
Not available
Not available
Mic high-frequency extension (measured)
Not available
Not available
Mic speech-to-noise ratio (measured)
Not available
Not available
Latency (measured)
Not available
Not available
Bluetooth latency, worst (measured)
Not available
Not available
2.4 GHz latency, worst (measured)
Not available
Not available
Latency in game mode (measured)
Not available
Not available
Longest tested use per charge
8.5h
5.45h
Battery life with case (measured)
Not available
Not available
Full charge time (measured)
Not available
Not available
Weight per bud (measured)
Not available
Not available

Microphones and calls

4 of 7 differ
All microphones in both earbuds
Not available
Bone conduction voice sensor
Not available
Not available
Mic noise reduction
Not available
Not available
Call audio bandwidth
Not available
Not available
Mic mute control
Not available

Connectivity

7 of 18 differ
Auracast
Not available
Not available
Multipoint with LDAC
Not available
Not available
Automatic switching between own devices
Not available
Not available
Audio sharing
Not available
Not available
Wireless receiver
Not available
Not available
Receiver connector
Not available
Not available
Simultaneous 2.4 GHz and Bluetooth audio
Not available
Not available

Latency

None of 3 known
Low latency mode
Not available
Not available
Claimed latency
Not available
Not available
Lowest claimed latency
Not available
Not available

Compatibility

3 of 4 differ
Connection per platform
Not available
Not available
Features that need a specific device
ABowers & Wilkins Pi8
FeatureNeeds
Google Fast PairAndroid device running Marshmallow 6.0 or later that supports the Google Fast Pair Service.
Audio retransmission from the charging caseConnect an analogue or USB source to the case with the supplied 3.5 mm or USB-C cable. The case only sends the source audio to the earbuds. Earbud microphone signals are not sent back to the case.
BJabra Elite 10 Gen 2
FeatureNeeds
Google Fast PairAndroid 6.0 or higher
Swift PairWindows 10 or later. It may not be enabled by default.
Google AssistantAndroid only
Audio streaming using the Smart casePlug the Smart case into a USB-C or 3.5 mm audio output port with the supplied cable. The source must support audio output on that port.
Spatial Sound and Head TrackingOff by default. Turn them on in the Jabra Sound+ app.

Battery and charging

10 of 13 differ
Battery per bud
Not available
Not available
User-replaceable earbud battery
Not available
Not available
Longest claimed use per charge
6.5h
8h
Playback per charge with ANC (claimed)
6.5h
6h
Playback per charge without ANC (claimed)
Not available
8h
Total with case (claimed)
20h
36h
Total with case and ANC (claimed)
20h
27h
Talk time (claimed)
Not available
Not available
Full charge time, buds
Not available
Charging guidance
The earbuds take up to 3 hours to fully recharge in the Smart case. The earbuds and the Smart case take up to 3 hours to fully charge by USB-C cable or on the Jabra wireless charging pad. Fast charging needs at least 30 percent battery in the Smart case.2Owner's manualcdn.iceshop.nl/objects/mmo_120564253_1720035633_2338_470715.pdfRead 13 October 2026Sections 4.2 to 4.4.

Charging case

1 of 10 differ
Case battery
Not available
Not available
User-replaceable case battery
Not available
Not available
Case full charge time
Not available
Not available
Wireless standards
Not available
Wireless charging power
Not available
Not available
Speaker in case
Not available
Not available
Screen on case
Not available
Not available

Controls

4 of 5 differ
Gestures
Single tap: play or pause, answer call, Double tap: next track, Triple tap: previous track, Double tap and hold: end call, Touch and hold left earbud for 1 second: switch noise cancelling and pass-through, Touch and hold right earbud for 1 second: voice assistant, Touch and hold either earbud: volume, left down and right up, when set in the app2Owner's manualbowerswilkins.com/on/demandware.static/-/Library-Sites-bowers_northamerica_shared/default/dw1ab1096c/downloads/Pi8-Manual-v5_2025Dec11_GFP.pdfRead 15 October 2026Manual Diagram 2 symbols for the taps and Quick Start Guide: hold the left earbud for noise cancelling and pass-through, the right earbud for voice assistant. The double tap and hold symbol is read as end call from the red phone icon. Volume on tap and hold is from TechRadar.
Right button press: play or pause, Right button hold: volume up, Left button hold: volume down, Right button double-press: next track, Right button triple-press: previous track, Left button press: switch between HearThrough and ANC, Left button double-press: voice assistant, Either button press during a call: answer call or mute and unmute, Either button double-press during a call: end or reject call2Owner's manualcdn.iceshop.nl/objects/mmo_120564253_1720035633_2338_470715.pdfRead 13 October 2026Sections 7.2 to 7.4.

Sensors and health

1 of 9 differ
Sensors
Not available
Not available
Heart rate sensor
Not available
Not available
Skin temperature sensing
Not available
Not available
Hearing aid feature
Not available
Not available
Medical clearances
Not available
Not available
Hearing test
Not available
Hearing protection
Not available
Not available
Health features
Not available
Not available

Fit and durability

3 of 7 differ
Stabilisers
Not available
Not available
Dust and water rating, case
Not available
Not available
Water resistance depth
Not available
Not available

Software

2 of 6 differ
Finding network
Not available
Not available
Precision finding
Not available
Not available
Live translation
Not available
Not available

Dimensions and weight

4 of 4 differ
Bud dimensions
Not available

Certifications

1 of 3 differ
Hi-Res Audio
Not available
Not available
Communication certifications
Not available
Not available
FCC IDs
Not available
Not available
Other certifications
Not available

In the box

2 of 2 differ
In the box
Pi8 earbuds with medium ear tips, Extra small ear tips x2, Small ear tips x2, Large ear tips x2, Charging case, USB-C charging cable, USB-C to 3.5 mm audio cable, Literature pack with Quick Start Guide and Safety and Warranty2Owner's manualbowerswilkins.com/on/demandware.static/-/Library-Sites-bowers_northamerica_shared/default/dw1ab1096c/downloads/Pi8-Manual-v5_2025Dec11_GFP.pdfRead 15 October 2026Manual section 1 carton contents, with the Quick Start Guide and Safety and Warranty literature pack.

Warranty

1 of 1 differ
Manufacturer warranty (source market)
Not available

Both are also in the API. Back to all earbuds.