Microphones / Compare

Elgato Wave DX vs RØDE NT1 Signature Series

A

Product A: Elgato

Wave DX

29 of 61 known

Change Elgato Wave DX

Compare the RØDE NT1 Signature Series with

Search microphones

B

Product B: RØDE

NT1 Signature Series

33 of 61 known

Change RØDE NT1 Signature Series

Compare the Elgato Wave DX with

Search microphones

All 61 fields

Every value links to where we found it.

Only differences

AElgato Wave DX

BRØDE NT1 Signature Series

General

6 of 8 differ

Series

Wave1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026The page lists Wave DX in the Wave audio line next to Wave Neo, Wave:3 and Wave Go.

NT11Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The product line is the NT1 range. The page title is NT1 Signature Series.

Model numbersiMaker identifiers for this exact model and its listed variants. Excludes sibling models and other generations.

10MAH9901, 10MAH9901-WH23007, 10MAH9901-DM2502, 10MAH9901-PI23006, 10MAH9901-BL2501, 10MAH9901-PU2501, 10MAH9901-GR25011Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026SKU 10MAH9901 is the black model in the Tech Specs and in the page data. The page data gives one SKU per colour: 10MAH9901-WH23007 White, 10MAH9901-DM2502 DOOM, 10MAH9901-PI23006 Pink Petal, 10MAH9901-BL2501 Glacier Ice, 10MAH9901-PU2501 Wild Lavender and 10MAH9901-GR2501 Forest Green. No retailer listing of the colour SKUs was found.

NT1SIGNATUREBLACK, NT1SIGNATUREWHITE, NT1SIGNATUREORANGE, NT1SIGNATURECOBALT, NT1SIGNATURERED, NT1SIGNATUREPINK, NT1SIGNATUREPURPLE, NT1SIGNATUREBLUE, NT1SIGNATUREGREEN, NT1SIGNATUREYELLOW1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Variant SKUs in the page data: NT1SIGNATUREBLACK, NT1SIGNATUREWHITE, NT1SIGNATUREORANGE, NT1SIGNATURECOBALT, NT1SIGNATURERED, NT1SIGNATUREPINK, NT1SIGNATUREPURPLE, NT1SIGNATUREBLUE, NT1SIGNATUREGREEN and NT1SIGNATUREYELLOW.5Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026Store SKUs for the ten colour variants.

GTIN / EAN

8400066629908Retailer pageshop.cisilion.com/elgato-wave-dx-black-pc-microphone-10mah9901.htmlRead 15 October 2026EAN 0840006662990 for 10MAH9901 black. The Elgato page data carries 10840006662997, a GTIN-14 with a leading 1 that is not the retail barcode.9Retailer pageamazon.com/dp/B0B8GRCXB6Read 15 October 2026Amazon US product details list UPC 840006662990. The page also prints an item weight of 407 g, which is not used.

0698813013982, 0698813014941, 0698813015160, 0698813014965, 0698813014002, 0698813014064, 0698813014088, 0698813014040, 0698813014026, 06988130149275Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026Store barcodes are 12-digit UPC-A codes such as 698813013982 for black. They are written here as GTIN-13 with a leading zero: black 0698813013982, white 0698813014941, orange 0698813015160, cobalt 0698813014965, red 0698813014002, pink 0698813014064, purple 0698813014088, blue 0698813014040, green 0698813014026 and yellow 0698813014927.

AnnouncediThe maker's first announcement of this model. This is separate from first retail availability.

29 September 20223Press releaseaphnetworks.com/news/26070-dynamic-mic-no-other-elgato-launches-wave-dxRead 15 October 2026Copy of the CORSAIR press release dated 2022-09-29: Elgato today announced the launch of Wave DX.

7 November 20236Press articlemixonline.comRead 15 October 2026RØDE release reproduced by Mix, dateline Sydney, 2023-11-07.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Sonicstate repeats the RØDE release on 2023-11-07.

Status

Available1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026The US page sells all seven colours at 99.99 USD and shows them in stock.

Available1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The US page offers the microphone in all ten colours at 159 USD and the store shows each as in stock.5Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026The product is published and every colour variant is available.6Press articlemixonline.comRead 15 October 2026Available today, as of 2023-11-07.

PredecessoriThe model this one directly replaced, in the same line, tier and size, as the maker or a trusted review names it.

Not available

Not available

SuccessoriThe model that directly replaced this one, in the same line, tier and size. A revision such as a Slim or OLED model does not count when a next generation exists.

Not available

Not available

Launch price (US)iThe maker's US launch MSRP for the stated configuration, excluding tax. Current store prices and later discounts do not qualify.

$99.994Press article9to5toys.com/2022/09/29/elgato-wave-dx-launchRead 15 October 20269to5Toys, 2022-09-29: the Wave DX is available for purchase today for $99.99. US price, no sales tax.

$1596Press articlemixonline.comRead 15 October 2026The NT1 Signature Series runs US $159 and is available today.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Pricing and availability: $159.

Launch price (EU)iThe maker's euro launch price for the stated configuration, including VAT as published. Current store prices and later discounts do not qualify.

€119.995Reviewigorslab.de/en/elgato-wave-dx-im-test-xlr-microphoneRead 15 October 2026Igor's Lab (Germany), 2022-10-01: price tag of 119.99 EUR, offered separately at 119.99 EUR. The tax treatment is not stated. German recommended prices include VAT.10Press articletuttotech.netRead 15 October 2026Italian launch article: available at the recommended price of 119.99 euro. The tax treatment is not stated.

€1898Reviewdelamar.de/test/rode-nt1-signature-series-testRead 15 October 2026German review of 2023-12-21: price 189.00 Euro and UVP (recommended retail price) 189.00 Euro, incl. VAT. The delamar product page says the microphone is available from now on at an UVP of 189 Euro. RØDE publishes no euro launch price in its release.

MarketsiISO country or region codes where this exact model or variant is sold. A source page's language does not establish availability.

Not available

Not available

ColoursiThe maker's own colour names

Black, White, DOOM, Pink Petal, Glacier Ice, Wild Lavender, Forest Green1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Colour swatches on the page: Black, White, DOOM, Pink Petal, Glacier Ice, Wild Lavender, Forest Green.

Black, White, Orange, Cobalt, Red, Pink, Purple, Blue, Green, Yellow1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The page data lists ten colours: Black, Blue, Green, Orange, Pink, Purple, Red, Yellow, Cobalt and White.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The colour strip shows Black, Blue, Green, Purple, Pink, Red, Yellow, Orange, Cobalt Blue and White. The text of this sheet still says six colours.5Maker product pagebrandstore.rode.com/products/nt1-signature-series.jsonRead 15 October 2026Color option values: Black, White, Orange, Cobalt, Red, Pink, Purple, Blue, Green, Yellow.6Press articlemixonline.comRead 15 October 2026At launch: black plus red, green, purple, pink and blue. White, orange, cobalt and yellow came later.

Microphone typeiElectret condensers count as condenser.

Dynamic1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026

Condenser1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: large-diaphragm cardioid condenser microphone with an HF6 1-inch true condenser capsule.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026

Capsule and pickup

2 of 4 differ

Capsule sizeiDiaphragm diameter of one capsule as published. A 1-inch capsule is 25.4 mm.

Not available

25.4mm1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: HF6 1-inch true condenser capsule. 1 inch is 25.4 mm.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Acoustic and electrical specifications: Capsule 1.00 inch, which is 25.4 mm.

CapsulesiNumber of capsules. Multi-pattern USB microphones often use three.

11Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026The page names the dynamic capsule inside Wave DX in the singular. It prints no capsule count.

12Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The sheet names one HF6 1-inch capsule and one cardioid pattern. It prints no capsule count.

Polar patternsiEvery pattern the user can select. Unidirectional is used only when the maker names no exact pattern.

Cardioid1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: Polar pattern Cardioid.

Cardioid1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: tight cardioid polar pattern.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Polar Pattern: Cardioid.

Address typeiEnd address means you speak into the top of the microphone. Side address means you speak into its side.

End address1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026FAQ: speak into the top of the mic, not the side. Wave DX is a top-address microphone that captures the voice from the end of the grille.2Owner's manualelgato.com/explorer/products/wave/elgato-wave-dx-quick-start-guideRead 15 October 2026Using Wave DX: speak into the end of Wave DX at about 8-12 cm.6Reviewtomshardware.com/reviews/elgato-wave-dx-xlr-microphoneRead 15 October 2026Review: it is an end-address microphone. The review spec table calls the microphone type Condenser, which is wrong. Elgato says dynamic.

Side address1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The spec table lists Address Type Side.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Address Type: Side.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The guide says the NT1 Signature Series is a side-address microphone with a tight cardioid polar pattern.

Sound specs

5 of 10 differ

Frequency responseiPublished acoustic range of the microphone. A sample rate does not establish it.

Min50 HzMax15 kHz1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: 50 - 15000 Hz. No tolerance is printed.

Min20 HzMax20 kHz1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 20Hz - 20kHz.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Frequency Range: 20Hz - 20kHz.

Sensitivity (analog)iAnalog output level for 94 dB SPL at 1 kHz, as published in dBV. For a microphone with a switchable preamp, the bypass value is used. A value published only in mV/Pa is converted as 20 x log10(mV/Pa / 1000) and rounded to one decimal, so 1.6 mV/Pa is -55.9 dBV/Pa. The printed value goes in the source note. A sensitivity in plain dB with no reference, as many low-cost USB microphones print it, is left out.

-52dBV/Pa1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: 2.5 mV/Pa, -52 dbV/Pa. 2.5 mV/Pa is -52.04 dBV, so the two figures agree. The reference level is not printed and 1 Pa is assumed.

-32dBV/Pa1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz.

Sensitivity (digital)iDigital output level over USB for 94 dB SPL at 1 kHz. The minimum gain value is used when several are given. The gain setting goes in the source note. On a USB-only microphone use this field only when the maker prints dBFS or ties a dBV value to the USB output, as Shure does for the MV7i. A dBV, dB re 1 V/Pa or mV/Pa value that names no USB output is left out. The printed unit and the gain go in the source note. A value printed for another reference level is converted by the level difference, so -40 dBFS at 80 dB SPL is -26 dBFS at 94 dB SPL. The printed value goes in the source note.

Not available

Not available

Max SPLiHighest sound pressure level at the source's distortion limit. The THD level and output path go in the source note. The value without a clipping protection mode such as Clipguard is used when both are given. The value with the pad off is used. When the maker lists several preamp loads, the highest load is used. The load goes in the source note. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for sensitivity.

Not available

142dB SPL1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 142 dB SPL. The page prints no THD level.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Maximum SPL: 142 dB SPL. No THD level is printed.

Max SPL distortion limitiThe distortion level at which the maker states the max SPL, e.g. 1, 3 or 10 % THD. Left out when the maker names none. Max SPL figures compare only at the same limit.

Not available

Not available

Self-noiseiEquivalent noise level, A-weighted, in dB SPL. Lower is quieter. The analog value is used when analog and digital values are both given. A value in dBV or dBFS is left out. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for max SPL.

Not available

4dB(A)1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Equivalent Noise (A-Weighted) 4dBA.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Equivalent Noise (A-Weighted): 4dBA.

Digital noise flooriDigital noise floor of a USB microphone as printed, usually A-weighted over 20 Hz to 20 kHz. Lower is quieter. Processing that was on during the test goes in the source note. It is not self-noise.

Not available

Not available

Signal-to-noise ratioiAs published. Reference level and weighting go in the source note. The microphone's own figure, not the SNR of a built-in headphone amplifier.

Not available

Not available

Dynamic rangeiAs published. The distortion level goes in the source note. The value without a clipping protection mode is used when both are given. Use the same pad setting, preamp load and gain as for max SPL.

Not available

Not available

Output impedanceiRated impedance of the XLR output. For a microphone with a switchable preamp, the bypass value is used. A USB-only microphone has no value here, even when the maker prints an impedance for the capsule. When the maker prints a rated and an actual impedance, as Shure does for the SM58, the rated value is stored and the actual one goes in the source note.

600Ω1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: Impedance 600 Ohm.

100Ω1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 100 ohm.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Output Impedance: 100 ohm.

Connectivity

1 of 7 differ

OutputsiOutputs that carry the microphone signal to a computer, interface or mixer. A headphone jack does not count. Wireless is a radio link to a receiver, such as 2.4 GHz.

XLR1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: Connector 3-pin XLR. FAQ: the mic does not connect directly via USB.2Owner's manualelgato.com/explorer/products/wave/elgato-wave-dx-quick-start-guideRead 15 October 2026Installation: use a shielded microphone cable with 3-pin XLR connectors to connect to a preamp or audio interface.

XLR1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Analogue Output Connection 3-pin XLR.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Analogue Output Connection: 3-pin XLR. No other output is listed.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 6: connect the included XLR cable to the base of the microphone.

Inputs for other sourcesiInputs on the microphone for another microphone or instrument, which it sends to the computer with its own signal.

Not available

Not available

USB and XLR at onceiBoth outputs carry audio at the same time.

Not available

Not available

USB portiUSB socket on the microphone. USB-B is the full-size square socket. A Micro-B socket is Micro-USB, even when the maker writes USB-B.

Not available

Not available

Cable host plugiPlug on the computer end of the included USB cable. An included adapter is listed in In the box.

Not available

Not available

Cable lengthiLength of the included USB cable.

Not available

Not available

Phantom poweriPhantom power for the XLR output. Optional means some XLR modes work without it, for example a built-in preamp in bypass. Supplies means the microphone gives 48 V phantom power to a microphone on its XLR input.

Not required1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026FAQ: no phantom power is required and a 48V setting on the interface can stay off. The Quick Start Guide goes further and says not to use 48V phantom power. The schema has no option for phantom power that must be off, so the closest option is stored.2Owner's manualelgato.com/explorer/products/wave/elgato-wave-dx-quick-start-guideRead 15 October 2026Note: do not use 48V Phantom Power with Wave DX.

Required1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Analogue Power Requirements P48.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Analogue Power Requirements: P48.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 7: enable 48V phantom power (P48) on your device.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026For the microphone to function you need to supply 48V phantom power.

Digital audio

None of 3 known

Max bit depthiHighest recording bit depth over USB.

Not available

Not available

Max sample rateiHighest recording sample rate over USB. This is not the frequency response.

Not available

Not available

32-bit float recordingiRecords over USB in 32-bit floating point. A 32-bit integer format does not count.

Not available

Not available

Monitoring

0 of 2 differ

Headphone outputiA headphone jack on the microphone.

No1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026The Tech Specs list one connector, 3-pin XLR. The page calls the mic pure analog with zero circuitry.

No2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The only output listed is the 3-pin XLR. No headphone output is listed.

Zero-latency monitoringiThe headphone output plays the microphone signal directly, before it reaches the computer.

Not available

Not available

Controls and processing

None of 2 known

Onboard controlsiFunctions you can change on the microphone itself, by knob, button, switch or touch. Settings that exist only in the app do not count. A switch that sets preamp gain steps, such as +18 or +28 dB, counts as gain. Echo is a knob or button for an echo or reverb effect.

Not available

Not available

Onboard processingiProcessing inside the microphone, analog or digital, that works without the maker's app running. A maker statement that settings are saved in the microphone counts. Effects that run only in the app on the computer do not count. An expander counts as noise gate. Clip protection such as Clipguard is clip protection. Limiter is only for a limiter the maker lists as its own effect, never both for one feature. Brand names such as APHEX or Clipguard go in the source note. Attenuation pad is a switch that lowers the capsule output, such as -15 dB. Echo is an echo or reverb effect in the microphone. Exciter or bass enhancer covers effects that add harmonics or bass, such as APHEX Aural Exciter and Big Bottom.

Not available

Not available

Mounting and accessories

3 of 4 differ

Mount threadsiStand threads the microphone or its included mount accepts, also with an included adapter.

5/8 inch, 3/8 inch, 1/4 inch1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: 5/8 inch mount with 3/8 inch and 1/4 inch thread adapters included.2Owner's manualelgato.com/explorer/products/wave/elgato-wave-dx-quick-start-guideRead 15 October 2026Installation: use a coin to remove the pre-installed thread adaptors, which leaves the 5/8 inch mount.

5/8 inch, 3/8 inch4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The SM6 shock mount features both 5/8-inch and 3/8-inch thread sizes.

Shock mountiInternal is suspension inside the body. Included is a separate shock mount in the box. A cradle or ring mount that comes fitted to the microphone or its stand is included, even when the maker calls it built-in. A microphone with internal suspension and a separate shock mount in the box is included.

Not available

Included1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page: a studio-grade SM6 shock mount is in the box. The microphone sits inside it.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Text: a studio-grade shock mount is included. The drawing labels it SM6.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 2: place the microphone inside the shock mount.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The SM6 shock mount and pop filter come in the box.

Pop filteriPop protection built in or in the box.

Internal1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Internal pop shield of acoustically engineered nylon fiber between two layers of foam.

External screen1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page icon: Shock Mount and Detachable Pop Filter. The user guide describes a pop filter on a telescopic arm that screws into the shock mount.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Text: a studio-grade shock mount, pop filter and XLR cable are included.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Step 1: screw the pop filter into the mounting thread of the shock mount with the L-shaped bracket.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026The pop filter has a telescopic arm and screws into a socket on the shock mount.

Desk stand includediA desk stand or base in the box. A yoke alone does not count. A boom arm does not count either. In the box names it.

No1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026The box list has no stand. Wave Desk Stand is sold separately.

No2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026The what's in the box drawing shows the microphone, the SM6 shock mount and the XLR cable. No stand is listed.

Design and build

2 of 3 differ

Housing material

Hardened steel1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Page gallery: hardened steel chassis.

Machined high-grade aluminium1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Page text: a rugged body machined from high-grade aluminium.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Rugged aluminium body and high-grade finishes.

RGB lightingiDecorative lighting. Status and mute lights alone do not count. RGB lighting is lighting with no function. A level meter or mute indicator is not RGB lighting, even when its colour can be chosen. Lighting that changes colour on its own counts, even when it also turns off on mute.

No6Reviewtomshardware.com/reviews/elgato-wave-dx-xlr-microphoneRead 15 October 2026Review of 2022-10-24: since it uses an XLR connection without phantom power, there is no lighting.

Not available

Lighting zonesiIndependently controllable lighting areas.

Not available

Not available

Software

None of 2 known

SoftwareiThe maker's app for the microphone.

Not available

Not available

User firmware updatesiA public updater or a documented firmware update procedure exists for this exact model.

Not available

Not available

Compatibility

None of 2 known

Works withiOperating systems the maker lists for USB audio. App support can be narrower.

Not available

Not available

ConsolesiConsoles the maker lists for USB audio.

Not available

Not available

Dimensions and weight

2 of 3 differ

Microphone dimensionsiMicrophone body without a stand or a detachable shock mount. A fixed yoke is included. Width is left to right as seen by the speaker, height is bottom to top in normal use and depth is front to back. Orient the microphone as in use on its yoke or stand. Depth is the direction it points at the speaker, height is up and width is across. An upright side-address microphone has its length as height. An end-address microphone has its length as depth, also when it is held in the hand. A round microphone with only a length and a diameter uses the diameter for the other two sides. The source note states the mapping.

Width53Height53Depth146mm(2.1 × 2.1 × 5.7 in)1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: 53 x 53 x 146 mm. The page data names the 146 mm Product Length and 53 mm Product Width and Height. The mic is end-address, so the 146 mm length is the depth toward the speaker. GamesRadar says the body is under 15 cm long and 5.3 cm across, not counting the mounting joint, so the size is the body only.7Reviewgamesradar.com/elgato-wave-dx-reviewRead 15 October 2026Review: without the mounting joint the body is under 15 cm long and 5.3 cm across.

Width52Height189Depth52mm(2 × 7.4 × 2 in)1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: Length 52, Width 52, Height 189 mm. The microphone is side-address and stands upright, so the length of 189 mm is the height and the 52 mm diameter is both width and depth.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Mechanical specifications: Length 52, Width 52, Height 189 mm.

Microphone weightiWithout stand, detachable shock mount and cable. A fixed yoke is included.

440g(15.5 oz)1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs: 440 g | 1 lb. The page does not say whether the swivel mount is part of the weight. Tom's Hardware prints 0.97 lb, which is 440 g. Amazon prints 407 g, which is not used because the maker states a value.

313g(11 oz)1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Spec table: 313 g.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Mechanical specifications: Weight 313 grams.

Weight with standiWith the included stand or mount attached, without the cable. An included shock mount between the microphone and the stand counts.

Not available

Not available

Certifications

1 of 1 differ

Other certifications

Not available

FCC Part 15 Class B, CAN ICES-003 (B) / NMB-003 (B), KC (South Korea)3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Compliance page: FCC Part 15 Class B digital device, CAN ICES-003 (B) / NMB-003 (B) and a South Korea KC entry (R-R-R72-NT1SIGNATURE).

In the box

1 of 1 differ

In the box

Wave DX, Swivel Mount, 3/8" and 1/4" Thread Adapters, Quick Start Guide1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026Tech Specs, In The Box: Wave DX, Swivel Mount, 3/8" and 1/4" Thread Adapters, Quick Start Guide. XLR cable and audio interface are not included.

NT1 Signature Series Microphone, SM6 Studio Microphone Shock Mount, Pop Filter, XLR Cable for NT1 Signature Series1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026What's in the box in the page data: NT1 Signature Series (1), SM6 Studio Microphone Shock Mount (1) and XLR Cable for NT1 Signature Series (1). The page and the datasheet also say a pop filter is included.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026What's in the box drawing: SM6, NT1 Signature Series Microphone and XLR Cable. The text says a studio-grade shock mount, pop filter and XLR cable come with it.4Maker product pagerode.com/en-us/user-guides/nt1-signature-seriesRead 15 October 2026A studio-quality shock mount, pop filter and XLR cable are included.7Press articlesonicstate.com/news/2023/11/07/rde-releases-new-edition-of-the-nt1Read 15 October 2026Each microphone comes with a studio-grade shock mount, a pop filter and a premium XLR cable.

Links

Not compared

Product page

www.elgato.com/us/en/p/wave-dx-dynamic-microphone1Maker product pageelgato.com/us/en/p/wave-dx-dynamic-microphoneRead 15 October 2026

rode.com/en-us/products/nt1-signature-series1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The maker's US product page.

Spec sheet

Not available

edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdf1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026Datasheet linked from the Resources section of the page.2Maker spec sheet (PDF)edge.rode.com/pdf/products/1362/NT1%20Signature%20Series_Datasheet_FA.pdfRead 15 October 2026Datasheet of the NT1 Signature Series, page 1 and 2.

Manual

www.elgato.com/explorer/products/wave/elgato-wave-dx-quick-start-guide2Owner's manualelgato.com/explorer/products/wave/elgato-wave-dx-quick-start-guideRead 15 October 2026Quick Start Guide, page 1 of the Elgato explorer. The PDF is linked from it.

edge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdf1Maker product pagerode.com/en-us/products/nt1-signature-seriesRead 15 October 2026The Product Manual link of the page is the quick start guide.3Owner's manualedge.rode.com/pdf/products/1362/0927-0876-02-01%20NT1%20SIGNATURE%20SERIES%20QSG_FA%20WEB.pdfRead 15 October 2026Quick start guide, part 0927-0876-02-01, 9 pages.

EPREL registration numberiId in the EU energy label database. Each size or model of a series has its own id, so it is per variant.

Not available

Not available

Warranty

1 of 1 differ

Manufacturer warranty (source market)iThe maker's warranty period for the exact SKU or configuration and market named in the source note. It applies only to that stated market, not every regional variant. Statutory consumer rights are excluded. The base term is stored. An extension that needs registration goes in the source note.

2years3Press releaseaphnetworks.com/news/26070-dynamic-mic-no-other-elgato-launches-wave-dxRead 15 October 2026The release says Wave DX is backed by a two-year warranty. Amazon US also lists a 2 year manufacturer warranty.

Not available

Both are also in the API. Back to all microphones.