Handheld consoles / Compare

AYN Odin 3 vs Nintendo Switch (HAC-001(-01))

A

Product A: AYN

Odin 3

64 of 165 known

Change AYN Odin 3

Compare the Nintendo Switch (HAC-001(-01)) with

Search handheld consoles

B

Product B: Nintendo

Switch (HAC-001(-01))

101 of 165 known

Change Nintendo Switch (HAC-001(-01))

Compare the AYN Odin 3 with

Search handheld consoles

All 165 fields

Every value links to where we found it.

Only differences

AAYN Odin 3

BNintendo Switch (HAC-001(-01))

General

7 of 9 differ

Series

Odin1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026Page title AYN Odin 3. The Odin line runs from the Odin to the Odin 2 family and the Odin 3

Nintendo Switch3Maker product pagenintendo.com/us/gaming-systems/switch/systemRead 5 October 2026

Model numbersiMaker identifiers for this exact model and its listed variants. Excludes sibling models and other generations.

OD3-B8BK, OD3-P12BK, OD3-P12WT, OD3-P12RB, OD3-P12CB, OD3-P12CP, OD3-M16BK, OD3-M16WT, OD3-M16RB, OD3-M16CB, OD3-M16CP, OD3-U24BK, OD3-U24WT, OD3-U24RB, OD3-U24CB, OD3-U24CP1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026SKU codes of the 16 store options (Base OD3-B8BK, Pro OD3-P12xx, Max OD3-M16xx, Ultra OD3-U24xx). The store lists Base in Black only. The page is titled Batch 8 Pre-order and its prices are higher than the launch prices

HAC-001(-01)1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Ordinary non-OLED Switch generation, represented by exact 2019 HAC-001(-01). Earlier 2017 HAC-001 battery and chip facts excluded. Lite, OLED and Switch 2 are separate marketed models.

GTIN / EAN

Not available

00045496883775, 000454968821677Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026US store About this item lists UPC 00045496883775 for the Neon Blue and Neon Red set. The Gray set UPC 00045496882167 is on its own store page. Both are 14-digit GTINs with the maker's leading zeroes. Current retail Switch units are the HAC-001(-01) revision.34Maker product pagenintendo.com/us/store/products/nintendo-switch-gray-gray-joy-conRead 10 October 2026US store About this item lists UPC 00045496882167 for the Gray set.

AnnouncediThe maker's first announcement of this model. This is separate from first retail availability.

5 September 20256Press articleretrohandhelds.gg/ayn-odin-3Read 11 October 2026Everything You Need to Know, published 5 September 2025, lists the full specs after AYN's teasers at the end of August

17 July 201912Press articletechspot.com/news/80998-new-nintendo-switch-model-significantly-boosts-battery-life.htmlRead 7 October 2026Dated July 17, 2019 report says Nintendo introduced revised version that Wednesday on its Japanese website. Exact HAC-001(-01) and XKW identifiers named. July announcement distinct from August retail. Current maker page opened first but no dated announcement remains.

Status

Available1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026

Available7Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026The structured Offer on the current US Neon Blue and Neon Red page is InStock. The Gray page showed OutOfStock when read. The current price is not the launch price.

PredecessoriThe model this one directly replaced, in the same line, tier and size, as the maker or a trusted review names it.

Not available

Not available

SuccessoriThe model that directly replaced this one, in the same line, tier and size. A revision such as a Slim or OLED model does not count when a next generation exists.

Not available

Nintendo Switch 213Press releasenintendo.co.jp/corporate/release/en/2025/250116.htmlRead 7 October 2026Opening paragraph explicitly names Nintendo Switch 2 as successor to Nintendo Switch. Generation successor for ordinary Switch family. OLED and Lite are sibling marketed models, not substituted here.

Launch price (US)iThe maker's US launch MSRP for the stated configuration, excluding tax. Current store prices and later discounts do not qualify.

From $3491Maker product pageayntec.com/products/ayn-odin-3Read 11 October 20267Press articleretrohandhelds.gg/ayn-odin-3-pre-ordersRead 11 October 20268Press articleliliputing.comRead 11 October 2026

$299.9910Press articletomsguide.com/news/how-to-make-sure-youre-buying-the-new-nintendo-switchRead 10 October 2026Article dated August 15, 2019 says the upgraded Switch with better battery life just launched in stores and retails for $299. The US list price of the Switch is $299.99 and the revision has no separate price, so 299.99 is stored. Excludes sales tax.

Launch price (EU)iThe maker's euro launch price for the stated configuration, including VAT as published. Current store prices and later discounts do not qualify.

Not available

Not available

MarketsiISO country or region codes where this exact model or variant is sold. A source page's language does not establish availability.

Not available

US7Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026

ColoursiThe maker's own colour names

Black, White, Rainbow, Clear Blue, Clear Purple1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026Black, White, Rainbow, Clear Blue and Clear Purple on the maker page images. The Base option lists Black only

Neon Blue/Neon Red, Gray7Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026Standard Neon Blue/Neon Red and Gray selectors. Unresearched special editions excluded.

Device classiA streaming handheld only plays remote or cloud games

Android handheld1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026Android 15 handheld with a built-in controller around the touch screen

Dedicated console3Maker product pagenintendo.com/us/gaming-systems/switch/systemRead 5 October 2026

Form factor

Slate1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026Single slate body with built-in controls on the product photos

Detachable controllers3Maker product pagenintendo.com/us/gaming-systems/switch/systemRead 5 October 2026

Platform and software

6 of 7 differ

OS family

Android1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026

Nintendo Switch OS3Maker product pagenintendo.com/us/gaming-systems/switch/systemRead 5 October 2026

OS at launch

Android 151Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026Page text: Android 154Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026

Not available

Latest OS

Not available

Nintendo Switch system version 23.0.115Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22525/~/system-update-information-for-nintendo-switchRead 7 October 2026US main System Update Information page names Switch/Lite/OLED and latest version 23.0.1 released September 30, 2026. Accessed October 7, 2026. Old 43314 history page and AU page still show 23.0.0, superseded by main release and newer dated EU 23.0.1 bulletin. Switch 2 firmware not inherited.

Built-in game stores

Not available

Nintendo eShop3Maker product pagenintendo.com/us/gaming-systems/switch/systemRead 5 October 2026Maker Nintendo eShop purchases on console. Nintendo Switch physical game cards listed separately.

Physical games

None3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026The bottom edge shows only the TF card slot, audio jack and USB-C port. No game card or disc slot

Game card1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Backward compatibility

Not available

No physical compatibility with Wii U discs or Nintendo 3DS game cards.30Press articlenintendolife.com/news/2016/10/nintendo_confirms_switch_isnt_physically_backwards_compatible_with_3ds_and_wii_u_softwareRead 7 October 2026Report of Nintendo reply to Famitsu explicitly states Switch cannot play Wii U discs or 3DS cards. Scope is physical media, not ports or current Nintendo Switch Online emulation. Exact 2019 maker sheet retains Nintendo Switch game-card format, and revision reviews establish unchanged game compatibility. Switch 2 is separate.

Upscaling and frame generationiSupport at system or driver level

Not available

Not available

Processor and graphics

11 of 16 differ

Chip

Qualcomm Dragonwing Q81Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026Page text: Qualcomm Dragonwing Q8. Early press called it Snapdragon 8 Elite, AYN later clarified the Dragonwing Q8 name2Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026

NVIDIA customised Tegra processor1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Maker only says customised NVIDIA Tegra. Teardown identifies Tegra X1-based. CPU cores, clocks, GPU units and process node come from the sources on those fields.

Chip brand

Qualcomm1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026

NVIDIA1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Core configurationiPhysical CPU cores, including cores reserved by the operating system. P/E labels describe the maker architecture. Source notes identify clocks used only in specific operating modes.

AAYN Odin 3

Physical core count	Core	Max clock (GHz)
2	Oryon (Phoenix L)	4.32
6	Oryon (Phoenix M)	3.53

Source2Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026Maker chip image: 2*4.32GHz Oryon (Phoenix L) and 6*3.53GHz Oryon (Phoenix M), 8 cores

BNintendo Switch (HAC-001(-01))

Physical core count	Core	Base clock (GHz)	Max clock (GHz)
4	Cortex-A57	1.02	1.785

Source35Press articledigitalfoundry.net/articles/digitalfoundry-2025-nintendo-switch-2-final-tech-specs-and-system-reservations-confirmedRead 10 October 2026Switch 1 column: 4x ARM Cortex A57, 1020 MHz docked and mobile, max 1.785 GHz. One core is reserved for the system. The Switch 1 column covers the Tegra X1 family. The 2019 Digital Foundry review says the HAC-001(-01) runs at the same clocks as the original.

CPU cores

8=CalculatedFrom Core configuration

4=CalculatedFrom Core configuration

Max CPU clock

4.32GHz=CalculatedFrom Core configuration

1.785GHz=CalculatedFrom Core configuration

Process

3nm2Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026Chip image: Process 3nm

16nm36Spec databaseen.wikipedia.org/wiki/Nintendo_SwitchRead 10 October 2026Footnote says consoles made after August 2019 use the Tegra X1+ built on a 16 nm process with LPDDR4X RAM. The same page says the HAC-001(-01) revision uses the X1+.37Reviewcomputerbase.de/artikel/gaming/nintendo-switch-lite-test.69242Read 10 October 2026Says the second Switch generation, told apart by a serial number starting XKW, uses a new Tegra X1 revision made by TSMC in 16 nm FinFET instead of 20 nm. The HAC-001(-01) is this generation.

GPU

Qualcomm Adreno 8302Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026Chip image: Adreno830

NVIDIA Maxwell-based GPU, 256 CUDA cores35Press articledigitalfoundry.net/articles/digitalfoundry-2025-nintendo-switch-2-final-tech-specs-and-system-reservations-confirmedRead 10 October 2026Switch 1 column: Maxwell, 256 CUDA cores.

GPU architecture

Not available

Maxwell35Press articledigitalfoundry.net/articles/digitalfoundry-2025-nintendo-switch-2-final-tech-specs-and-system-reservations-confirmedRead 10 October 2026Switch 1 column: Maxwell.

GPU compute unitsiAMD compute units, NVIDIA streaming multiprocessors or Intel Xe-cores. These counts use different architectures and are not directly comparable. The source note names the unit.

Not available

236Spec databaseen.wikipedia.org/wiki/Nintendo_SwitchRead 10 October 2026Technical specifications table lists 2 compute units for the GM20B GPU. The unit is NVIDIA streaming multiprocessors.

GPU max clockiHighest documented GPU operating clock for this device. Source notes say when a value applies only in docked or mains-powered mode.

Not available

768MHz35Press articledigitalfoundry.net/articles/digitalfoundry-2025-nintendo-switch-2-final-tech-specs-and-system-reservations-confirmedRead 10 October 2026Docked clock 768 MHz. Up to 460 MHz in mobile mode. The column also lists a 921 MHz maximum that games do not use.

GPU compute (claimed)iMaker-rated FP32 throughput. Mode is named in the source note. Not a game performance benchmark.

Not available

Not available

Power modesiDocumented device APU power limits or per-mode clocks. A continuous range may be represented by its two endpoints, identified in source notes. Transient boost power is not substituted for sustained TDP.

AAYN Odin 3

Not available

BNintendo Switch (HAC-001(-01))

Mode	Power source	Max CPU clock (GHz)	Max GPU clock (MHz)
Handheld	Battery	1.02	460
Docked	Docked	1.02	768

Source35Press articledigitalfoundry.net/articles/digitalfoundry-2025-nintendo-switch-2-final-tech-specs-and-system-reservations-confirmedRead 10 October 2026Clocks per mode only. Power per mode is not published.

Lowest TDP

Not available

Not available

Highest TDP

Not available

Not available

Highest TDP on battery

Not available

Not available

Custom TDPiYou can set a TDP value, not only presets

Not available

Not available

Memory and storage

8 of 12 differ

RAM

8, 12, 16, 24GB6Press articleretrohandhelds.gg/ayn-odin-3Read 11 October 2026Base 8GB, Pro 12GB, Max 16GB, Ultra 24GB

4GB19Reviewdigitalfoundry.net/articles/digitalfoundry-2019-new-nintendo-switch-hac-001-01-reviewRead 7 October 20262019 performance discussion explicitly states revised model replaces memory with 4 GB LPDDR4X. Tested HAC-001(-01) Hong Kong unit, same published 32 GB revision model. Exact RAM capacity claim, not chip-density multiplication. SwitchChargers hardware table independently corroborates.

RAM type

LPDDR5X4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026Spec table: LPDDR5x. The review does not name the RAM speed5Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026Spec table: 8GB, 12GB, 16GB and 24GB LPDDR5X. Same table lists 128GB, 256GB and 512GB as UFS 3.1 and 1TB as UFS 4.0, while launch material lists UFS 4.0 for Pro, Max and Ultra. Both are UFS

LPDDR4X9Reviewifixit.com/News/32540/we-tore-down-the-new-nintendo-switch-whats-differentRead 5 October 2026Exact HAC-001(-01) August 19, 2019 teardown explicitly updated LPDDR4X memory versus older LPDDR4. Capacity comes from the Digital Foundry source on ram_gb.

RAM speediEffective memory transfer rate, not a clock stated in MHz. Source notes identify mode or platform speed limits.

Not available

3,200MT/s36Spec databaseen.wikipedia.org/wiki/Nintendo_SwitchRead 10 October 2026Table lists memory clock 1331.2 to 1600 MHz. LPDDR4X transfers twice per clock, so 3200 MT/s at the docked 1600 MHz clock. This matches 25.6 GB/s over the 64-bit bus in the Digital Foundry table. Handheld mode runs a lower clock.

Memory bandwidthiPublished memory bandwidth in decimal GB/s. Source notes identify handheld or docked mode. Do not calculate from rounded speed and bus-width claims.

Not available

25.6GB/s35Press articledigitalfoundry.net/articles/digitalfoundry-2025-nintendo-switch-2-final-tech-specs-and-system-reservations-confirmedRead 10 October 202625.6 GB/s docked and 21.3 GB/s mobile. The docked figure is stored.

StorageiAdvertised internal storage tiers in decimal GB. Convert a published 1 TB or 2 TB tier to 1000 or 2000 GB. Keep a literal published GB number as given. Do not infer usable formatted capacity.

128 GB, 256 GB, 512 GB, 1 TB6Press articleretrohandhelds.gg/ayn-odin-3Read 11 October 2026Base 128GB UFS 3.1, Pro 256GB, Max 512GB and Ultra 1TB, all UFS 4.0. Ultra 1TB stored as 1000 GB

32GB1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Maker System Memory 32 GB is game/data storage, not RAM. System files reduce usable capacity. Storage technology not inferred.

Storage typeiType of the built-in storage. eMCP is a package that holds eMMC flash and RAM, so it is eMMC.

UFS6Press articleretrohandhelds.gg/ayn-odin-3Read 11 October 2026UFS 3.1 and UFS 4.09Reviewjoeysretrohandhelds.com/reviews/ayn-odin-3-reviewRead 11 October 2026The 128GB option is UFS 3.1 and the other options are UFS 4.0. Both are UFS

eMMC18Reviewswitchchargers.com/comparing-the-new-and-old-nintendo-switchRead 7 October 2026Hardware comparison table identifies new 2019 Switch storage SK Hynix H26M62002JPR 32 GB eMMC. This is installed storage technology, not another 2017 module or hypothetical chip capability. Supplier model not separately stored.

Installed drive PCIe generationiPCIe generation of the installed storage module, not the maximum supported by the connector.

Not available

Not available

Storage slotsiInternal physical storage sockets, including occupied sockets. Interface describes compatible storage. Source notes distinguish the installed drive from slot capability.

Not available

Not available

M.2 slots

Not available

Not available

Memory card

microSD3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Bottom edge is marked TF CARD next to the audio jack and USB-C port

microSD1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Card speed class

Not available

UHS-I16Maker product pagesupport.nintendo.com/jp/switch/data_management/microsdcard/index.htmlRead 7 October 2026Official original Switch microSD support page explicitly supports UHS-I and says UHS-II cards work only without UHS-II reading speeds. Covers game-data storage, not screenshots-only capability. No recommended 60-95 MB/s range stored as measured read speed.

Max card sizeiLargest card capacity explicitly supported for games. Decimal storage units: 1 TB is 1000 GB. Support for screenshots only does not establish game-storage support.

Not available

2TB2Maker product pagenintendo.com/us/gaming-systems/switch/tech-specsRead 5 October 2026Up to 2 TB microSDHC/microSDXC, stored as 2000 decimal GB. SDXC requires console update through internet. Card sold separately.

Display

8 of 17 differ

Screen size

6in(15.2 cm)1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026

6.2in(15.7 cm)1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Native resolution

1920 × 1080px2Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026Maker display image: Size 6-inch, Refresh Rate 120Hz, Resolution 1080*1920. Stored in handheld orientation as 1920 x 1080

1280 × 720px1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Pixel density

367.2ppi=CalculatedFrom Screen size and Native resolution

236.9ppi=CalculatedFrom Screen size and Native resolution

Aspect ratio

16:92Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 20261080 x 1920 is 16:9. The maker does not print the ratio. The review table states 16:95Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026Spec table: Aspect Ratio 16:9

Not available

Panel typeiUse the panel type explicitly stated by the source. IPS-level is a maker comparison term. LCD means the maker does not name the LCD subtype.

OLED1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026Customized Full HD 6-inch AMOLED touch screen2Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026

LCD (subtype not stated)1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Maker only publishes LCD. IPS and maximum built-in refresh are not stated. Dock 60 fps is not transferred to display refresh.

Native panel orientationiPortrait panels break some games

Portrait2Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026The maker states 1080*1920 and DroiX says the 1080x1920 panel is rotated for landscape use, so the panel is natively portrait4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026Screen features a rotated 1080x1920 resolution

Not available

Screen surfaceiSurface finish or treatment stated by the maker or reviewer. Etched anti-glare glass is not automatically classified as matte.

Not available

Not available

Touchscreen

Yes1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 202610Spec databaseretrocatalog.com/retro-handhelds/ayn-odin-3Read 11 October 2026Rendered feature label Touch Screen: Supported

Yes1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Built-in display refresh modesiMaximum built-in display refresh rate for each documented resolution and mode. External displays and dock output have separate fields. Do not copy supported input timings as proven maxima.

AAYN Odin 3

Width (px)	Height (px)	Max (Hz)
1920	1080	120

Source1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 20262Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_11.jpgRead 11 October 2026

BNintendo Switch (HAC-001(-01))

Width (px)	Height (px)	Max (Hz)
1280	720	60

Source38Reviewtomsguide.com/face-off/nintendo-switch-oled-vs-switch-vs-switch-liteRead 10 October 2026States all three Switch screens use 720p and a standard 60 Hz refresh rate. Only the native 1280x720 mode is stored.

Max refresh rate

120Hz=CalculatedFrom Built-in display refresh modes

60Hz=CalculatedFrom Built-in display refresh modes

Adaptive sync

Not available

Not available

VRR lower limit

Not available

Not available

Brightness (SDR, claimed)

Not available

Not available

Peak brightness (HDR, claimed)

Not available

Not available

DCI-P3 coverage (claimed)iPercentage of the DCI-P3 colour space covered, from 0 to 100. Gamut volume, Display P3 and unspecified P3 are different measurements.

Not available

Not available

HDR formats

Not available

Not available

Second display

Not available

Not available

Controls

10 of 15 differ

Stick sensoriHow the stick measures its position. Capacitive is only for a stick that senses its position by capacitance. Maker wording such as capacitive sticks often means the sticks sense a resting thumb, which is Touch-sensitive sticks.

Hall effect3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Upgraded Full-size Hall Joystick with a Hall-effect sensor5Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026

Potentiometer9Reviewifixit.com/News/32540/we-tore-down-the-new-nintendo-switch-whats-differentRead 5 October 2026Actual 2019 teardown explicitly same original Joy-Con design. Potentiometer technology from separately cited original-controller teardown discussion, not a specific guessed Alps part.20Reviewifixit.com/News/51167/new-nintendo-switch-same-drifting-joy-consRead 7 October 2026Original Joy-Con teardown discussion identifies potentiometer design. Exact 2019 iFixit revision teardown 32540 and SwitchChargers 2019 comparison independently confirm same analog stick design in supplied Joy-Con. No aftermarket Hall-effect/TMR upgrade inferred.

Stick layout

Offset3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Left stick above the D-pad and right stick below the face buttons on the product photos10Spec databaseretrocatalog.com/retro-handhelds/ayn-odin-3Read 11 October 2026Thumbstick Layout: Double, asymetrical

Offset5Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 20266Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22634Read 5 October 2026

Touch-sensitive sticksiThe sticks sense a resting thumb. It says nothing about how the stick measures its position, which is Stick sensor.

Not available

Not available

Replaceable stick modules

Not available

Service without soldering21Reviewifixit.com/Guide/Left+Joy-Con+Joystick+Replacement/113182Read 7 October 2026Left replacement steps 10-12 unlock joystick ZIF connector, remove two screws and lift module out. Right guide 113185 steps 11-13 independently uses ribbon ZIF and screws. Requires opening controller and calibration, not hot-swappable. Guides original Joy-Con included with 2019 revision. Optional Gulikit replacement steps do not describe stock sensor technology.33Reviewifixit.com/Guide/Right+Joy-Con+Joystick+Replacement/113185Read 7 October 2026Independent right original Joy-Con steps 11-13 read: joystick ZIF ribbon, two 3.5 mm Phillips screws, module lift-out and calibration. Left guide also verified. Service opening/tools required, solder-free module replacement, no hotswap.

Trigger sensor

Hall effect3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Hall Effect Triggers label in the maker image

Digital9Reviewifixit.com/News/32540/we-tore-down-the-new-nintendo-switch-whats-differentRead 5 October 2026Actual 2019 teardown explicitly same original Joy-Cons, matching hands-on digital-trigger claim. Optional GameCube controller excluded.22Reviewoutcyders.net/article/hands-on-many-nintendo-switch-joy-con-control-schemesRead 7 October 2026Joy-Con Grip hands-on paragraph explicitly says Joy-Con triggers are digital, not analogue. Same original Joy-Con hardware retained in 2019 revision according to exact teardown/comparison. GameCube optional analog controller is separate.

Trigger stops

Not available

Not available

D-pad

Cross3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Cross-shaped D-pad on the product photos

Four buttons5Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 20266Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22634Read 5 October 2026Original left Joy-Con has four separate directional buttons. It is not the Lite cross D-pad. Offset sticks and Nintendo face order checked in original drawing.

Face button labels

Nintendo3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Product photos show X at the top, A at the right, B at the bottom and Y at the left. The maker says swapping the layout needs opening the shell and cutting pins

Nintendo5Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 20266Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22634Read 5 October 2026

Extra rear and grip buttonsiExtra rear or grip buttons and paddles. Excludes shoulder bumpers and triggers (L1/R1/L2/R2), Joy-Con rail SL/SR and system/menu controls.

24Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026The back features two customisable macro buttons

05Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 2026System release controls are not extra rear gameplay inputs. Rail SL/SR also excluded from rear/grip count. Complete Joy-Con inventory checked separately.6Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22634Read 5 October 2026

Trackpads

Not available

05Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 2026The system diagram labels power and volume buttons, audio jack, game card slot, speakers, brightness sensor, stand, microSD slot, rail, air vent and serial number sticker. It shows no trackpad. The touchscreen is not counted.

System-level remappingiRemap buttons without support in the game

Not available

Yes8Maker product pagenintendo.com/au/support/articles/what-is-button-mappingRead 5 October 2026System-level remapping for supported Joy-Con is saved on console. POWER, Volume, HOME and SYNC cannot be remapped. Not controller onboard memory.

System buttons

Power, Volume, Home, Back4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026Back and Home buttons at the bottom, volume and power buttons near the shoulders

POWER Button, Volume buttons, HOME Button, Capture Button, + Button, - Button, Joy-Con SYNC buttons5Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 2026Electronic system controls only: Power, Volume, Home, Capture, +/-, and SYNC. Joy-Con release controls are mechanical attachment latches and excluded. Gameplay ABXY, directions, stick clicks, L/R/ZL/ZR and rail SL/SR excluded.6Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22634Read 5 October 2026

Detached controller connectioniWireless connection used after the controllers are detached. Does not describe the attached controller contacts.

Not available

Bluetooth2Maker product pagenintendo.com/us/gaming-systems/switch/tech-specsRead 5 October 2026Joy-Con wireless link explicitly Bluetooth 3.0. Console Bluetooth 4.1 is a separate device specification.

Controller mouse sensoriA controller works as a mouse on a desk

Not available

Not available

Fingerprint

Not available

None5Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 2026The same complete diagram labels no fingerprint sensor.

Motion and feedback

2 of 3 differ

Gyroscope

Yes10Spec databaseretrocatalog.com/retro-handhelds/ayn-odin-3Read 11 October 2026Rendered feature label Gyroscope: Supported

Yes1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

RumbleiUse the maker feedback wording. Generic haptic feedback is not automatically labelled HD haptics. Trigger rumble is separate from adaptive trigger resistance.

Rumble10Spec databaseretrocatalog.com/retro-handhelds/ayn-odin-3Read 11 October 2026Rendered feature label Vibration: Supported

HD haptics2Maker product pagenintendo.com/us/gaming-systems/switch/tech-specsRead 5 October 2026Maker Joy-Con HD Rumble stored as HD haptics. Applies to supplied controllers, not bare tablet.

RGB lighting

Yes3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Dual RGB-Illuminated Full Size Analog Sticks

Not available

Measured

6 of 30 differ

Brightness (measured)iCentre, full white, SDR. Measured by a reviewer

Not available

Not available

HDR peak brightness (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Contrast ratio (measured)i1000 means 1000:1. Measured by a reviewer

Not available

Not available

DCI-P3 coverage (measured)iMeasured DCI-P3 area coverage, from 0 to 100. Do not substitute gamut volume, Display P3 or unspecified P3. Test method belongs in source notes.

Not available

Not available

Colour accuracy (measured Delta E)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

PWM frequency (measured)iOnly when the reviewer found PWM flicker

Not available

Not available

3DMark Time Spy graphics (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

3DMark Steel Nomad Light (measured)iRuns on Windows, Android and Arm. Measured by a reviewer

Not available

Not available

3DMark Wild Life Extreme (measured)iMeasured by a reviewer, not claimed by the maker

6,684points4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 20263DMark Wild Life Extreme 6684 in the review text. Odin 3 Max 16GB/512GB review unit. Preset and power mode are not stated

Not available

Cinebench 2024 single-core (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Cinebench 2024 multi-core (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

AnTuTu (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Game frame rates (measured)iReviewer measurements only. Each row preserves resolution, preset and power settings when stated. In-game and driver frame generation are identified in source notes.

Not available

Not available

SSD sequential read (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Memory card read (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Battery runtime per test (measured)iReviewer runtime tests only. Exact time conversions are allowed. Source notes identify brightness, game, power mode and settings. Missing conditions are not inferred.

AAYN Odin 3

Test	Game	Hours (h)
Max load	AnTuTu run in a continuous loop, High Performance setting	2.42
Gaming	Nintendo Switch emulation, Captain Toad, High Performance, Smart fan, 100% brightness, 10% audio	5.37
Gaming	GameHub, Dispatch, High Performance, Smart fan, 100% brightness, 10% audio	2.37

Source4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026AnTuTu on a continuous loop at full brightness with the High Performance setting: 2 hours 25 minutes. Fan mode and screen refresh rate are not stated. Odin 3 Max review unit9Reviewjoeysretrohandhelds.com/reviews/ayn-odin-3-reviewRead 11 October 2026Pro 12GB/256GB review unit. Switch emulation with Captain Toad ran 322 minutes and GameHub with Dispatch ran 142 minutes, both with High Performance, Smart fan, 100% brightness and 10% audio. A light GBA test was stopped after 14 hours or more. Brightness in nits and the Android build are not stated. The reviewer measured 16-17 W draw in the GameHub test

BNintendo Switch (HAC-001(-01))

Test	Game	Hours (h)
Gaming	Super Smash Bros. Ultimate	4.83
Gaming	The Legend of Zelda: Breath of the Wild	5.03
Gaming	The Legend of Zelda: Breath of the Wild	4.31
Gaming	The Legend of Zelda: Breath of the Wild	3.72
Gaming	The Legend of Zelda: Breath of the Wild	5.23

Source11Measurementtomsguide.com/news/new-nintendo-switch-battery-life-tested-how-much-better-is-itRead 5 October 2026Reviewer bought new 2019 unit, August 15, 2019. Endless eight-player CPU Super Smash Bros. Ultimate battle, all items and AI difficulty highest, brightness maximum, auto-sleep and auto-brightness off. Approximately 4 h 50 min equals 4.833333333333333 hours. Brightness in nits, firmware, audio, network and rumble conditions unknown. Older 2017 unit result excluded. Not a maker claim or minimum runtime.28Measurementdigitalfoundry.net/articles/digitalfoundry-2019-new-nintendo-switch-hac-001-01-reviewRead 7 October 2026Existing TomGuide Smash 4 h 50 row retained. Rows 2-3 exact HAC-001(-01) HK unit Zelda tests: 50% screen brightness 302 min. 100% brightness 258.5 min. Numeric conversions exact. Handheld battery operation. Actual nits, firmware, audio/radio/rumble, gamepatch and depletion criterion unstated. Rows 4-5 are separate SwitchChargers tests with own source note. No test result from original 2017 column used.29Measurementswitchchargers.com/comparing-the-new-and-old-nintendo-switchRead 7 October 2026Rows 4-5 are own new 2019 HAC-001(-01) Zelda tests. Stress: Korok Forest, 3 h 43 min, 100% brightness, auto brightness off, Wi-Fi/Bluetooth on. Travel: start cliff, 5 h 14 min, 75% brightness, auto brightness on, radios off. Detailed method independently reopened: console/Joy-Con start at 100%, end at automatic console shutdown, right stick rigged to pan camera and prevent idle. Firmware, patch, audio, rumble and nits unstated. Other rows are separate reviewers. Charging measurements remain omitted for unresolved adapter/endpoint scope.31Measurementswitchchargers.com/new-nintendo-switch-chargingRead 7 October 2026Same detailed methods article independently opened through its public indexed result. Exact brand-new HAC-001(-01), handheld Zelda. Console/Joy-Con initially 100%, end at automatic shutdown. Rigged right stick pans camera to prevent idle. Stress 3 h 43 min and travel 5 h 14 min match comparison table. Supplies endpoints and method, not duplicate rows.

Shortest gaming test runtime (measured)iShortest runtime among the stored gaming tests. This does not identify the globally heaviest game or worst possible use.

2.37h=CalculatedFrom Battery runtime per test (measured)

3.72h=CalculatedFrom Battery runtime per test (measured)

Longest gaming test runtime (measured)iLongest runtime among the stored gaming tests. This does not identify the globally lightest game or best possible use.

5.37h=CalculatedFrom Battery runtime per test (measured)

5.23h=CalculatedFrom Battery runtime per test (measured)

Video runtime (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Full charge time (measured)iMeasured 0 to 100% charge time. Source notes identify the charger, device operating state and test conditions.

Not available

183min39Measurementeurogamer.net/digitalfoundry-2019-nintendo-switch-lite-reviewRead 10 October 2026Table column New Switch HAC-001(-01), row Battery Charging 0-100%, reads 3 h 3 min, so 183 minutes. The review does not name the adapter or say whether the console slept or played during the test.

Power draw gaming (measured)iMeasured by a reviewer, not claimed by the maker

Not available

6W31Measurementswitchchargers.com/new-nintendo-switch-chargingRead 7 October 2026Power Usage Test Results: new HAC-001(-01) in handheld mode, Power-Z KM001 USB power meter and software. Average Power Usage 6 W for Zelda: Breath of the Wild at Korok Forest, 100% screen brightness, auto brightness off, Wi-Fi/Bluetooth on. Console/Joy-Con at 100%, so source says input power runs the system. Whole-device USB input, not wall AC or APU power. Averaging interval, calibration, firmware, patch, audio and rumble unstated. No 7.95 W peak, recharge draw or 18 W input ceiling substituted.

Fan noise per mode (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Max fan noise (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Fan noise while gaming (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Back surface under load (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Grips under load (measured)iWhere the hands rest. Measured by a reviewer

Not available

Not available

Chip temperature while gaming (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Stick tests (measured)iReviewer tests of the built-in sticks. Method, firmware, calibration and transport settings belong in source notes.

Not available

Not available

Speaker loudness (measured)iAt max volume. Measured by a reviewer

Not available

Not available

Weight (measured)iMeasured by a reviewer, not claimed by the maker

Not available

Not available

Audio

2 of 5 differ

SpeakersiBuilt-in speaker drivers on the handheld, with its controllers attached. Excludes speakers in a separate dock or headset.

25Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026Spec table lists Speakers: Stereo. Two speakers

25Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 2026Original front diagram explicitly identifies Speaker (L) and Speaker (R). Two front-facing physical drivers. Dock and headset excluded.

Speaker direction

Front-facing5Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026Spec table: Speaker Location Front-facing

Front-facing5Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 2026

Audio features

Not available

Stereo built-in speakers, 5.1-channel linear PCM through HDMI in TV mode1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

MicrophonesiPhysical built-in microphones on the handheld. Mono audio or an array name alone does not prove a capsule count.

Not available

027Press articlethinkuknow.org.au/sites/default/files/2023-11/Gaming%2C%20devices%20and%20what%20you%20need%20to%20know%20-%202023%20holidays.pdfRead 7 October 2026AFP ThinkUKnow published gaming-device guide PDF page 6 Nintendo Switch section explicitly states no built-in microphone and need for headset microphone. Original Switch family covers 2019 revision, not later Switch 2. Published independent guidance, not maker declaration. Maker controls/spec inventory and teardown checked first. External headset capsules excluded.

3.5 mm jack

Yes4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 20265Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026

Yes1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Ports and dock

7 of 10 differ

PortsiPhysical connectors on the handheld and its attached controllers. Controller charging-only ports count. Separate dock connectors belong in dock_ports.

AAYN Odin 3

Type	Version	Count	Side	DP Alt Mode	Max charging input (W)
USB-C	USB 3.1	1	Bottom	Yes	60
3.5 mm audio	Not available	1	Bottom	Not available	Not available
microSD card	Not available	1	Bottom	Not available	Not available

Source4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026Covered micro SD slot, 3.5 mm jack and USB 3.1 Type-C on the bottom edge. The Type-C port charges and transfers data

BNintendo Switch (HAC-001(-01))

Type	Version	Count	Side	Max charging input (W)
USB-C	Not available	1	Bottom	10
3.5 mm audio	Not available	1	Top	Not available
microSD card	Not available	1	Bottom	Not available
Other	Nintendo Switch game-card slot	1	Top	Not available
Other	Joy-Con rail mating contacts for attachment, pairing and charging	1	Left	Not available
Other	Joy-Con rail mating contacts for attachment, pairing and charging	1	Right	Not available

Source4Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdfRead 10 October 2026One bottom USB-C. Exact HAC-001(-01) charger information says delivered charger power must be 2.5-10 W to achieve maximum charging speed. The 10 W maximum is stored as the USB-C charging input and as wired_charging_max_w, the same reading used for the Switch Lite 9 W. TV mode requires 39 W adapter output. USB PD and up to 15 V are explicit. Two rail mating interfaces counted once each, left and right. Original manual and support explain attachment, pairing and charging. No contact pin count or transfer speed inferred. Dock and accessory grip connectors excluded.5Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22633Read 10 October 2026Top audio and game-card connectors, bottom USB-C, microSD under rear stand towards bottom. Side rail contacts described separately.6Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/22634Read 5 October 2026Joy-Con rail interfaces mate with console sides. Manual documents charging and pairing through attachment. No stock removable USB charging port on Joy-Con.

USB-C ports

1=CalculatedFrom Ports

1=CalculatedFrom Ports

USB4 or Thunderbolt

Not available

Not available

USB-C charging

60W=CalculatedFrom Ports

10W=CalculatedFrom Ports

Video outiVideo output available at a device connector with a direct cable or adapter. A console that requires its proprietary dock is documented through dock_output_max.

Yes4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 20265Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026Spec table: Video Out Yes

No1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Nintendo requires its proprietary dock for TV output. No direct USB-C display output documented. Dock video capability is stored in dock_output_max under field semantics.

Max external displayiHighest documented external resolution and its maximum refresh rate. Do not combine a resolution and refresh rate taken from different modes.

Resolution3840 × 2160 pxRefresh rate60 Hz4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026Spec table: DisplayPort Alt Mode (4K @ 60Hz)9Reviewjoeysretrohandhelds.com/reviews/ayn-odin-3-reviewRead 11 October 2026The video output docks the handheld to a TV with up to 4K60 video

Not available

External GPU

Not available

Not available

Dock

Not available

Included7Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026

Max output through dock

AAYN Odin 3

Not available

BNintendo Switch (HAC-001(-01))

Width (px)	Height (px)	Refresh rate (Hz)
1920	1080	60

Source1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Maker up to 1920x1080 at 60 fps via HDMI in TV mode. Requires proprietary dock. No raw USB-C DisplayPort output inferred.

Dock ports

Not available

USB-A: two side USB 2.0-compatible ports and one rear port, System connector for Nintendo Switch console, AC adapter input port, HDMI output port2Maker product pagenintendo.com/us/gaming-systems/switch/tech-specsRead 5 October 2026Original dock has two USB 2.0-compatible side ports, one unversioned rear USB port, system connector, AC adapter port and HDMI. OLED LAN dock excluded.

Wireless

5 of 6 differ

Wi-Fi

Wi-Fi 74Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 20265Reviewretrohandhelds.gg/ayn-odin-3-reviewRead 11 October 2026

Wi-Fi 51Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Wi-Fi bands

Not available

2.4 GHz, 5 GHz4Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdfRead 10 October 2026Ordinary Switch regulatory table lists 2412-2472 MHz and 5 GHz bands. No 6 GHz or cellular inferred.

Bluetooth

Not available

4.11Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

NFC

Not available

Yes2Maker product pagenintendo.com/us/gaming-systems/switch/tech-specsRead 5 October 2026Right Joy-Con NFC touchpoint only. Present on whole handheld with supplied controllers.

Cellular

No10Spec databaseretrocatalog.com/retro-handhelds/ayn-odin-3Read 11 October 2026Rendered feature label Mobile Data: Not supported

Not available

Network

Not available

Not available

Battery and charging

11 of 12 differ

Battery energyiEnergy rating of the handheld battery. Excludes batteries in detachable controllers and docks. Source notes name hardware revisions.

Not available

16Wh9Reviewifixit.com/News/32540/we-tore-down-the-new-nintendo-switch-whats-differentRead 5 October 2026Actual 2019 revision teardown explicitly same battery as older model. Independent original HAC-003 16 Wh label and Digital Foundry retention passage verified. Only identical pack rating transferred.24Reviewifixit.com/Teardown/Nintendo+Switch+Teardown/78263Read 7 October 2026Step 7 photograph shows Nintendo original HAC-003 battery label 3.7 V 4310 mAh 16.0 Wh. Reviewed visible maker energy rating, not mAh/voltage calculation. Exact 2019 Digital Foundry and iFixit revision teardown explicitly state original HAC-003 battery is retained. Energy is tablet battery only, excluding two Joy-Con cells.

Battery capacityiCharge rating of the handheld battery. Excludes batteries in detachable controllers and docks. Different battery voltages are not directly comparable.

8,000mAh1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 20263Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026

4,310mAh1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Claimed battery lifeiA range like 2 to 6.5 hours is one row with both values

AAYN Odin 3

Not available

BNintendo Switch (HAC-001(-01))

Use	Game	Hours (from) (h)	Hours (h)
Gaming	Not available	4.5	9
Gaming	The Legend of Zelda: Breath of the Wild	Not available	5.5

Source1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Exact 2019 reference estimates approximately 4.5-9 gaming hours, with separate Zelda: Breath of the Wild claim 5.5 hours. Game and usage affect results. Brightness, sleep and settings unscoped. Tablet 4310 mAh excludes Joy-Con batteries.

Battery life (claimed, min)

Not available

4.5h=CalculatedFrom Claimed battery life

Battery life (claimed, max)

Not available

9h=CalculatedFrom Claimed battery life

Wired chargingiMaximum supported charging input explicitly stated for the device. It is not automatically the wattage printed on the included adapter.

60W4Reviewdroix.net/blogs/ayn-odin3-reviewRead 11 October 2026Spec table: 60W Fast Charging

10W4Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdfRead 10 October 2026Power Requirements and EU Common Charger Information, row Nintendo Switch (HAC-001(-01)): the charger must deliver between 2.5 W and a maximum of 10 W to reach the maximum charging speed, so the console takes at most 10 W. All models support USB PD fast charging. The adapter in the box is rated 39 W for TV mode only.

Charging standards

Not available

USB PD4Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdfRead 10 October 2026

Charge 0 to 100 % (claimed)

Not available

180min17Maker product pagenintendo.com/us/gaming-systems/switch/tech-specsRead 7 October 2026Exact Nintendo Switch console HAC-001(-01) Charging time row approximately 3 hours while hardware is in sleep mode. Exact 3 h-to-180 min conversion retains approximate qualifier. Whole console battery, not Joy-Con 3 h 30 or dock battery.32Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/27111/kw/batterieRead 7 October 2026Additional information explicitly approximately three hours to fully charge when off/asleep and identifies HAC-001(-01)/XKW in same page. Confirms full-charge endpoint of exact tech-sheet approximate 3 h claim. Equivalent 180 min, console only.

Charge limitiStops charging early to protect the battery

Not available

Not available

Bypass chargingiRuns from the charger without cycling the battery

Yes9Reviewjoeysretrohandhelds.com/reviews/ayn-odin-3-reviewRead 11 October 2026The reviewer turns on charging separation to keep the battery safe and only charge the device while docked

Not available

Charger in box

Not available

Yes7Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026

Included chargeriRated output power of the supplied adapter. This may exceed the handheld charging limit. Store per sold configuration when bundles differ.

Not available

39W4Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdfRead 10 October 2026Original HAC-002 adapter rated 15 V, 2.6 A, 39 W in maker table. Standard box includes AC adapter. Adapter output differs from handheld charging limit.

Cooling

0 of 3 differ

Fans

13Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Active Cooling System. The exploded view shows one blower fan

123Reviewifixit.com/Guide/Nintendo+Switch+Fan+Replacement/113058Read 7 October 2026Guide introduction explicitly covers 2017 HAC-001 and 2019 HAC-001(-01), while replacement fan parts are revision-specific. Complete disassembly identifies single cooling fan and removal steps 25-28. Exact 2019 fan product IF378-088-2 corroborates part scope. No fan noise or thermal number inferred.

Vapor chamber

Not available

Not available

Custom fan curveiUser can set fan speed against temperature. A fixed preset or manual fan-speed slider alone does not qualify.

Not available

Not available

Build

1 of 3 differ

Built-in kickstand

Not available

Yes3Maker product pagenintendo.com/us/gaming-systems/switch/systemRead 5 October 2026Original narrow rear tabletop stand. OLED wide adjustable stand excluded.

Dust and water rating

Not available

Not available

User-replaceable parts

Not available

Not available

Dimensions and weight

3 of 3 differ

DimensionsiExternal dimensions with supplied controllers attached. Width is left to right, height is top to bottom in handheld use and depth is the maximum front-to-back extent, including fixed protruding controls. Leave depth missing when only unqualified chassis thickness is published. A clamshell is measured closed, as makers publish it. Width is left to right, height is front to back of the closed device and depth is the closed thickness.

Width224.8Height87.5mm(8.9 × 3.4 in)3Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026Image states 224.8*87.5*16.6mm and 390g. Width and height stored. The 16.6 mm thickness has no stated maximum or measuring point, so depth is left out

Width239Height102Depth28.4mm(9.4 × 4 × 1.1 in)1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026With Joy-Con attached: width 239 mm, height 102 mm. Chassis thickness 13.9 mm is excluded. Explicit maximum stick-tip to ZL/ZR extent 28.4 mm is full external depth. Matching maker metric values used without converting US inches.

WeightiWhole handheld with the supplied controllers attached, without a dock or carrying case. A detachable battery pack that ships with the handheld is attached. Approximate maker figures are identified in source notes.

390g(13.8 oz)1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 20263Maker product pagecdn.shopify.com/s/files/1/0570/3214/7136/files/odin3_2.jpgRead 11 October 2026

398g(14 oz)1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Approximately 398 g with supplied Joy-Con attached. Tablet alone approximately 297 g stored separately. Dock, straps, grip and case excluded.

Weight without controllersiHandheld body only, without detachable controllers, dock or carrying case.

Not available

297g(10.5 oz)1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026

Certifications

1 of 2 differ

Game compatibility programme

Not available

Not available

FCC ID

Not available

BKEHAC00125Reviewifixit.com/News/32540/we-tore-down-the-new-nintendo-switch-whats-differentRead 7 October 2026Exact 2019 upper-console back-label photograph switch_14.jpg explicitly shows HAC-001(-01) and FCC ID BKEHAC001. Regulatory report 12423101S-C June 25, 2019 independently confirms same exact model and FCCID. Supplied Joy-Con FCCIDs excluded from singular console field.

Other certifications

Not available

Directive 2014/53/EU26Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdfRead 7 October 2026Page 4 Declaration of Conformity explicitly says Nintendo Switch radio equipment complies with Directive 2014/53/EU. Exact HAC-001(-01) is named in adjacent power-requirements section. Generic UK statutory-requirements wording lacks named regulation, so not invented. This is radio conformity, not IP durability.

In the box

2 of 2 differ

In the box

Not available

Nintendo Switch console, Nintendo Switch dock, Joy-Con (L) and Joy-Con (R), Joy-Con wrist straps, Joy-Con grip, High Speed HDMI cable, Nintendo Switch AC Adapter7Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026Exact US standard box: console, dock, Neon Blue left and Neon Red right Joy-Con, straps, grip, High Speed HDMI cable and AC adapter. Gray selector also offered. Current store SKU 117972 is a package identifier, not claimed as 2019 hardware SKU. OLED LAN dock and charging grip excluded.

Carrying case

Not available

None7Maker product pagenintendo.com/us/store/products/nintendo-switch-neon-blue-neon-red-joy-con-117972Read 10 October 2026Complete standard box list contains no case. Optional accessory case excluded.

Links

Not compared

Product page

www.ayntec.com/products/ayn-odin-31Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026

www.nintendo.com/us/gaming-systems/switch/system3Maker product pagenintendo.com/us/gaming-systems/switch/systemRead 5 October 2026One ordinary Switch generation page using HAC-001(-01) reference hardware. Older 2017 battery revision is excluded from retained configuration.

Spec sheet

Not available

www.nintendo.com/my/hardware/switch/modal/specs/body.html1Maker product pagenintendo.com/my/hardware/switch/modal/specs/body.htmlRead 5 October 2026Exact maker metric specification table for HAC-001(-01). Current US table independently checked. No separate exact consumer specification PDF found.

Manual

Not available

www.nintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdf4Owner's manualnintendo.com/eu/media/downloads/support_1/nintendoswitch/NSwitch_ImportantInformation_UKV.pdfRead 10 October 2026Current original maker five-page Important Information PDF read. Ordinary Switch TV/tabletop/microSD drawings, Joy-Con charging, frequency and power tables checked. Charging section explicitly names HAC-001(-01).

EPREL registration numberiId in the EU energy label database. Each size or model of a series has its own id, so it is per variant.

Not available

Not available

Warranty

0 of 1 differ

Manufacturer warranty (source market)iThe maker's warranty period for the exact SKU or configuration and market named in the source note. It applies only to that stated market, not every regional variant. Statutory consumer rights are excluded. The base term is stored. An extension that needs registration goes in the source note.

1year1Maker product pageayntec.com/products/ayn-odin-3Read 11 October 2026One-year warranty. The page names no market

1year14Maker product pageen-americas-support.nintendo.com/app/answers/detail/a_id/50404/p/172/c/693Read 7 October 2026Nintendo of America Limited Warranty section applies to Nintendo Switch systems and states twelve months from purchase. US reference market, valid US/Canada. Statutory rights and separately sold extended protection excluded.

Both are also in the API. Back to all handheld consoles.