Microphones / Compare

Electro-Voice RE20 vs RØDE PodMic

A

Product A: Electro-Voice

RE20

25 of 61 known

Change Electro-Voice RE20

Compare the RØDE PodMic with

Search microphones

B

Product B: RØDE

PodMic

30 of 61 known

Change RØDE PodMic

Compare the Electro-Voice RE20 with

Search microphones

All 61 fields

Every value links to where we found it.

Only differences

AElectro-Voice RE20

BRØDE PodMic

General

5 of 8 differ

Series

RE Broadcast Series1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Series / Family: RE BROADCAST SERIES.

Not available

Model numbersiMaker identifiers for this exact model and its listed variants. Excludes sibling models and other generations.

RE20, RE20-BLACK, F.01U.413.981, F.01U.411.9061Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page data lists the part numbers F.01U.411.906 and F.01U.413.981. The variant selector shows RE20 Beige and RE20 Black. The black part number F.01U.411.906 is also the maker part number of the RE20-BLACK in retailer feeds. The beige F.01U.413.981 is the part number retailers give for the classic fawn beige RE20. The older part numbers F.01U.117.389 and 16207816 are not stored.8Retailer pageavlgear.com/products/electro-voice-re20-broadcast-announcer-microphone-black.jsonRead 15 October 2026The SKU carries the maker part number F01U411906 for the RE20-BLACK.

PODMIC, PODMICW1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026SKUs PODMIC (black) and PODMICW (white) in the product data of the page.

GTIN / EAN

8005493764648Retailer pageavlgear.com/products/electro-voice-re20-broadcast-announcer-microphone-black.jsonRead 15 October 2026Retailer feed: barcode 800549376464 for SKU EV-RE20BLACK-F01U411906, the black RE20-BLACK. ADI Global and an eBay listing print the same UPC for F.01U.411.906. The check digit is valid. The beige RE20 is not stored because retailers print 800549414463 and 800549385008 for it.

0698813005567, 06988130107695Maker product pagebrandstore.rode.com/products/podmic.jsonRead 15 October 2026The brand store feed lists barcode 698813005567 (written here as a 13-digit GTIN with a leading zero, as for the NT-USB+) for SKU PODMIC (black).6Retailer pagedateks.lv/en/cenas/mikrofoni/1008223-rode-podmic-whiteRead 15 October 2026Barcode 698813010769 (written here with a leading zero) for product code PODMICW (white). PB Tech and Chuck Levin's list the same UPC.

AnnouncediThe maker's first announcement of this model. This is separate from first retail availability.

Not available

19 December 20188Press releaserode.com/en/about/news-info/rode-launches-all-new-podmic-podcast-ready-dynamic-microphoneRead 15 October 2026RØDE launch news. audioXpress and Newsshooter carried it on 2018-12-19. The RØDE page itself shows no date.

Status

Available1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page shows the RE20 with a Where to buy button. Electro-Voice price lists are not on the page.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026The classic RE20 finish continues to be available under the current RE20 model name.

Available1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026The US page sells the PodMic at 99 USD in Black (PODMIC) and White (PODMICW).

PredecessoriThe model this one directly replaced, in the same line, tier and size, as the maker or a trusted review names it.

Not available

Not available

SuccessoriThe model that directly replaced this one, in the same line, tier and size. A revision such as a Slim or OLED model does not count when a next generation exists.

Not available

Not available

Launch price (US)iThe maker's US launch MSRP for the stated configuration, excluding tax. Current store prices and later discounts do not qualify.

Not available

$9910Reviewaudiomediainternational.com/review-rodecaster-pro-and-rode-podmicRead 15 October 2026Review dated 2019-08-30 lists PodMic RRP: $99. Podcast Insights also gives 99 USD. US price excl. tax.

Launch price (EU)iThe maker's euro launch price for the stated configuration, including VAT as published. Current store prices and later discounts do not qualify.

Not available

€1199Reviewdelamar.de/test/rode-podmicRead 15 October 2026German test dated 2019-06-11: Preis 119 Euro and UVP 119 Euro. The review does not state the tax treatment. German RRPs are normally printed with VAT. No RØDE EUR launch price was found.

MarketsiISO country or region codes where this exact model or variant is sold. A source page's language does not establish availability.

Not available

Not available

ColoursiThe maker's own colour names

Beige, Black1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Variant selector: RE20 Beige and RE20 Black. The spec table prints the colour Fawn beige. The black finish is dark charcoal.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026The RE20-BLACK is a new colour option in a low-reflection dark charcoal finish. The classic finish stays on sale under the RE20 name.

Black, White1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026Variants in the page data: Black and White.2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Colour: Black. The page lists Black and White.

Microphone typeiElectret condensers count as condenser.

Dynamic1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Element Type: Dynamic.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Generating Element: Dynamic.5Spec databaserecordinghacks.com/microphones/electro-voice/re20Read 15 October 2026Tags: dynamic.

Dynamic1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026Dynamic broadcast microphone with a high-quality dynamic capsule.2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026

Capsule and pickup

0 of 4 differ

Capsule sizeiDiaphragm diameter of one capsule as published. A 1-inch capsule is 25.4 mm.

Not available

Not available

CapsulesiNumber of capsules. Multi-pattern USB microphones often use three.

11Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page names one large Acoustalloy diaphragm in the singular and prints no capsule count. One is the reading of a single dynamic element.

11Maker product pagerode.com/en-us/products/podmicRead 15 October 2026The page names a dynamic capsule in the singular. It prints no capsule count.

Polar patternsiEvery pattern the user can select. Unidirectional is used only when the maker names no exact pattern.

Cardioid1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Polar Pattern: Cardioid.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Polar Pattern: Cardioid.

Cardioid1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026Tight cardioid polar pattern.2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026

Address typeiEnd address means you speak into the top of the microphone. Side address means you speak into its side.

End address2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Singers close talk the microphone with their lips almost touching the grille screen, which is at the top end of the body.5Spec databaserecordinghacks.com/microphones/electro-voice/re20Read 15 October 2026Tags include end-address. The page lists the RE20 as dynamic with a Variable-D design.

End address1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026The page calls the PodMic a broadcast-grade end-address microphone.4Owner's manualedge.rode.com/pdf/products/108/0927-0716-03-05%20PODMIC%20QSG_FINAL%20ARTWORK-WEB.pdfRead 15 October 2026Step 3: talk or sing into the end of the microphone.

Sound specs

3 of 10 differ

Frequency responseiPublished acoustic range of the microphone. A sample rate does not establish it.

Min45 HzMax18 kHz1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Frequency Response: 45 Hz - 18,000 Hz.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Frequency Response: 45 - 18,000 Hz.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: 45 to 18,000 Hz.

Min50 HzMax13 kHz2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Frequency Range: 50Hz ~13 kHz. The older datasheet (May 2023, linked from rode.com) and the spec tab of the rode.com page say 50Hz - 15kHz. The newer sheet is stored. The frequency chart in both sheets falls steeply at about 15 kHz.

Sensitivity (analog)iAnalog output level for 94 dB SPL at 1 kHz, as published in dBV. For a microphone with a switchable preamp, the bypass value is used. A value published only in mV/Pa is converted as 20 x log10(mV/Pa / 1000) and rounded to one decimal, so 1.6 mV/Pa is -55.9 dBV/Pa. The printed value goes in the source note. A sensitivity in plain dB with no reference, as many low-cost USB microphones print it, is left out.

Not available

-57dBV/Pa2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Sensitivity: -57.0dB re 1 Volt/Pascal +/- 2 dB @ 1kHz. The sheet adds 1.60mV @ 94 dB SPL, which would be -55.9 dBV. The older sheet and the rode.com spec tab print -57dBV (1.4mV @ 94dB SPL). The dB value is the same in all three.3Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_07_FA.pdfRead 15 October 2026Older datasheet: -57dBV (1.4mV @ 94dB SPL) +/- 2dB @1kHz.

Sensitivity (digital)iDigital output level over USB for 94 dB SPL at 1 kHz. The minimum gain value is used when several are given. The gain setting goes in the source note. On a USB-only microphone use this field only when the maker prints dBFS or ties a dBV value to the USB output, as Shure does for the MV7i. A dBV, dB re 1 V/Pa or mV/Pa value that names no USB output is left out. The printed unit and the gain go in the source note. A value printed for another reference level is converted by the level difference, so -40 dBFS at 80 dB SPL is -26 dBFS at 94 dB SPL. The printed value goes in the source note.

Not available

Not available

Max SPLiHighest sound pressure level at the source's distortion limit. The THD level and output path go in the source note. The value without a clipping protection mode such as Clipguard is used when both are given. The value with the pad off is used. When the maker lists several preamp loads, the highest load is used. The load goes in the source note. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for sensitivity.

Not available

Not available

Max SPL distortion limitiThe distortion level at which the maker states the max SPL, e.g. 1, 3 or 10 % THD. Left out when the maker names none. Max SPL figures compare only at the same limit.

Not available

Not available

Self-noiseiEquivalent noise level, A-weighted, in dB SPL. Lower is quieter. The analog value is used when analog and digital values are both given. A value in dBV or dBFS is left out. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for max SPL.

Not available

Not available

Digital noise flooriDigital noise floor of a USB microphone as printed, usually A-weighted over 20 Hz to 20 kHz. Lower is quieter. Processing that was on during the test goes in the source note. It is not self-noise.

Not available

Not available

Signal-to-noise ratioiAs published. Reference level and weighting go in the source note. The microphone's own figure, not the SNR of a built-in headphone amplifier.

Not available

Not available

Dynamic rangeiAs published. The distortion level goes in the source note. The value without a clipping protection mode is used when both are given. Use the same pad setting, preamp load and gain as for max SPL.

Not available

Not available

Output impedanceiRated impedance of the XLR output. For a microphone with a switchable preamp, the bypass value is used. A USB-only microphone has no value here, even when the maker prints an impedance for the capsule. When the maker prints a rated and an actual impedance, as Shure does for the SM58, the rated value is stored and the actual one goes in the source note.

150Ω1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Nominal Impedance: 150 ohms balanced. The old data sheets say the microphone is wired for 150 ohms and can be rewired for 50 or 250 ohms by a solder change. The shipped 150 ohm value is stored.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Impedance: 150 ohms balanced.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: impedance 150 ohms.

320Ω2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Output Impedance: 320 ohm.

Connectivity

0 of 7 differ

OutputsiOutputs that carry the microphone signal to a computer, interface or mixer. A headphone jack does not count. Wireless is a radio link to a receiver, such as 2.4 GHz.

XLR1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The spec data and the Wikipedia article list a three-pin XLR output only.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: three-pin male XLR connector.

XLR2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Output Connection: XLR.4Owner's manualedge.rode.com/pdf/products/108/0927-0716-03-05%20PODMIC%20QSG_FINAL%20ARTWORK-WEB.pdfRead 15 October 2026Step 2: connect an XLR cable to the output on the rear of the microphone.

Inputs for other sourcesiInputs on the microphone for another microphone or instrument, which it sends to the computer with its own signal.

Not available

Not available

USB and XLR at onceiBoth outputs carry audio at the same time.

Not available

Not available

USB portiUSB socket on the microphone. USB-B is the full-size square socket. A Micro-B socket is Micro-USB, even when the maker writes USB-B.

Not available

Not available

Cable host plugiPlug on the computer end of the included USB cable. An included adapter is listed in In the box.

Not available

Not available

Cable lengthiLength of the included USB cable.

Not available

Not available

Phantom poweriPhantom power for the XLR output. Optional means some XLR modes work without it, for example a built-in preamp in bypass. Supplies means the microphone gives 48 V phantom power to a microphone on its XLR input.

Not required1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Plug in and go: delivers studio condenser response with no powering required.

Not required2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Phantom Power: Not required.

Digital audio

None of 3 known

Max bit depthiHighest recording bit depth over USB.

Not available

Not available

Max sample rateiHighest recording sample rate over USB. This is not the frequency response.

Not available

Not available

32-bit float recordingiRecords over USB in 32-bit floating point. A 32-bit integer format does not count.

Not available

Not available

Monitoring

0 of 2 differ

Headphone outputiA headphone jack on the microphone.

No1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The spec data lists no headphone output. The RE20 is a passive dynamic microphone with a single XLR output.

No2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026The datasheet lists XLR as the only output connection.

Zero-latency monitoringiThe headphone output plays the microphone signal directly, before it reaches the computer.

Not available

Not available

Controls and processing

1 of 2 differ

Onboard controlsiFunctions you can change on the microphone itself, by knob, button, switch or touch. Settings that exist only in the app do not count. A switch that sets preamp gain steps, such as +18 or +28 dB, counts as gain. Echo is a knob or button for an echo or reverb effect.

Not available

Not available

Onboard processingiProcessing inside the microphone, analog or digital, that works without the maker's app running. A maker statement that settings are saved in the microphone counts. Effects that run only in the app on the computer do not count. An expander counts as noise gate. Clip protection such as Clipguard is clip protection. Limiter is only for a limiter the maker lists as its own effect, never both for one feature. Brand names such as APHEX or Clipguard go in the source note. Attenuation pad is a switch that lowers the capsule output, such as -15 dB. Echo is an echo or reverb effect in the microphone. Exciter or bass enhancer covers effects that add harmonics or bass, such as APHEX Aural Exciter and Big Bottom.

High-pass filter1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page names a bass-tilt switch. The data sheet describes a passive network that tilts the low frequencies down 4.5 dB from 400 to 100 Hz. Wikipedia and RecordingHacks call it a high-pass filter below 400 Hz. Stored as high_pass_filter, the same way the SM7B bass rolloff is stored.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Architects and engineers specification: when the filter switch is on, low-frequency response tilts down 4.5 dB from 400-100 Hz. With the switch off, the response is flat from 80-6,000 Hz.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026Mid-bass tone-shaping switch.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026A switch tailors the mid-bass response and attenuates below 400 Hz with a mild high-pass filter.5Spec databaserecordinghacks.com/microphones/electro-voice/re20Read 15 October 2026The page lists a switchable high-pass filter below 400 Hz.

Not available

Mounting and accessories

1 of 4 differ

Mount threadsiStand threads the microphone or its included mount accepts, also with an included adapter.

Not available

5/8 inch, 3/8 inch7Retailer pagethomann.de/gb/rode_podmic.htmRead 15 October 2026Thomann says the PodMic can be mounted on conventional stands thanks to its integrated 5/8 inch and 3/8 inch threads. No maker document names the thread.

Shock mountiInternal is suspension inside the body. Included is a separate shock mount in the box. A cradle or ring mount that comes fitted to the microphone or its stand is included, even when the maker calls it built-in. A microphone with internal suspension and a separate shock mount in the box is included.

Internal1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Part of the integral blast and wind filter also shock mounts the internal microphone element, per the data sheet. The launch post and retailers say the element has an internal shock mount.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Part of the filter also shock mounts the internal microphone element, reducing the transfer of vibrations from external sources.

Internal1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026Internal shockmount. The page FAQ says the capsule is internally suspended and the swing mount is internally decoupled, so no external shock mount can be used.

Pop filteriPop protection built in or in the box.

Internal1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Integral blast and wind filter tames hard consonants without an add-on screen. An internal pop filter tames plosives.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026An integral blast and wind filter covers each acoustic opening, so singers can close talk with their lips almost touching the grille.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026Integrated pop filter.

Internal1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026Internal pop filter.

Desk stand includediA desk stand or base in the box. A yoke alone does not count. A boom arm does not count either. In the box names it.

No1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Included Accessories: 81715 stand clamp only. A clamp is not a desk stand.

No2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026What's in the box shows the PodMic only. No stand is listed.

Design and build

1 of 3 differ

Housing material

Steel1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Case Material: Steel.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Case Material: Steel.

All-metal body with stainless steel mesh grille1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026Robust all-metal body and hard-wearing stainless steel mesh grille.

RGB lightingiDecorative lighting. Status and mute lights alone do not count. RGB lighting is lighting with no function. A level meter or mute indicator is not RGB lighting, even when its colour can be chosen. Lighting that changes colour on its own counts, even when it also turns off on mute.

Not available

Not available

Lighting zonesiIndependently controllable lighting areas.

Not available

Not available

Software

None of 2 known

SoftwareiThe maker's app for the microphone.

Not available

Not available

User firmware updatesiA public updater or a documented firmware update procedure exists for this exact model.

Not available

Not available

Compatibility

None of 2 known

Works withiOperating systems the maker lists for USB audio. App support can be narrower.

Not available

Not available

ConsolesiConsoles the maker lists for USB audio.

Not available

Not available

Dimensions and weight

2 of 3 differ

Microphone dimensionsiMicrophone body without a stand or a detachable shock mount. A fixed yoke is included. Width is left to right as seen by the speaker, height is bottom to top in normal use and depth is front to back. Orient the microphone as in use on its yoke or stand. Depth is the direction it points at the speaker, height is up and width is across. An upright side-address microphone has its length as height. An end-address microphone has its length as depth, also when it is held in the hand. A round microphone with only a length and a diameter uses the diameter for the other two sides. The source note states the mapping.

Width54.4Height54.4Depth216.7mm(2.1 × 2.1 × 8.5 in)2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Dimensions: length 216.7 mm (8.53 in), widest diameter 54.4 mm (2.14 in), body diameter 49.2 mm (1.94 in). The RE20 is a round end-address microphone used pointing at the speaker, so the 216.7 mm length is the depth and the 54.4 mm widest diameter is both width and height. The body diameter 49.2 mm is not stored.

Width109Height62Depth172mm(4.3 × 2.4 × 6.8 in)2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Product Dimensions (LxWxH, mm): 172 x 109 x 62 with the integrated swing mount. The drawing shows 172 mm along the microphone body, 109 mm across the swing mount and 62 mm as the body diameter. Stored as depth 172, width 109 and height 62. The height of a mic hung from its stem is larger.

Microphone weightiWithout stand, detachable shock mount and cable. A fixed yoke is included.

737g(1.6 lb)1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Net weight: 1 lb, 10 oz (737 g). Shipping weight 3 lb, 4 oz (1474 g) is not stored.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Net Weight: 737 g (1 lb, 10 oz).4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: net weight 737 g.

937g(2.1 lb)2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Weight: 937g. The swing mount is part of the microphone.

Weight with standiWith the included stand or mount attached, without the cable. An included shock mount between the microphone and the stand counts.

Not available

Not available

Certifications

1 of 1 differ

Other certifications

Not available

CE, UKCA, FCC Part 15 Class B, CAN ICES-3 (B) / NMB-3 (B), KC (South Korea)4Owner's manualedge.rode.com/pdf/products/108/0927-0716-03-05%20PODMIC%20QSG_FINAL%20ARTWORK-WEB.pdfRead 15 October 2026Compliance text lists FCC Part 15 Class B, CAN ICES-3 (B) / NMB-3 (B) and a South Korea ID R-R-R72-PodMic. The rode.com page links an EU and a UKCA Declaration of Conformity.

In the box

1 of 1 differ

In the box

RE20 microphone, 81715 stand clamp1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Included Accessories: 81715 stand clamp. The optional 309A shock-mounted stand adapter is not included.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Accessories Furnished: 81715 stand clamp. The 2006 sheet also lists a 309A shock-mounted stand adapter as an optional accessory.8Retailer pageavlgear.com/products/electro-voice-re20-broadcast-announcer-microphone-black.jsonRead 15 October 2026What's Included: Electro-Voice RE20-BLACK Microphone and 81715 Stand Clamp.

PodMic2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026What's in the box: PodMic (Black or White).

Links

Not compared

Product page

www.electrovoice.com/product/re201Maker product pageelectrovoice.com/product/re20Read 15 October 2026

rode.com/en-us/products/podmic1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026

Spec sheet

im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdf2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Electro-Voice RE20 spec sheet, Part Number 534678 Rev D, Telex Communications 6/2006, mirrored by Thomann. It is the most recent RE20 data sheet that could be opened. The current maker site hides its data sheet download behind a script.

edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdf2Maker spec sheet (PDF)edge.rode.com/pdf/products/108/PodMic_Datasheet_FA.pdfRead 15 October 2026Datasheet linked from the RØDE brand store. It was made in September 2024 and is newer than the datasheet linked from rode.com (PodMic_Datasheet_07_FA.pdf, May 2023).

Manual

Not available

edge.rode.com/pdf/products/108/0927-0716-03-05%20PODMIC%20QSG_FINAL%20ARTWORK-WEB.pdf4Owner's manualedge.rode.com/pdf/products/108/0927-0716-03-05%20PODMIC%20QSG_FINAL%20ARTWORK-WEB.pdfRead 15 October 2026Quick Start Guide. The rode.com page lists it as the Product Manual.

EPREL registration numberiId in the EU energy label database. Each size or model of a series has its own id, so it is per variant.

Not available

Not available

Warranty

1 of 1 differ

Manufacturer warranty (source market)iThe maker's warranty period for the exact SKU or configuration and market named in the source note. It applies only to that stated market, not every regional variant. Statutory consumer rights are excluded. The base term is stored. An extension that needs registration goes in the source note.

3years6Maker product pageelectrovoice.com/support/warrantyRead 15 October 2026The page links the Electro-Voice warranty conditions for North America and EMEA. Both state a warranty of three years for all other products, with only loudspeakers, loudspeaker accessories and the R300 and RE3 wireless microphones named separately. A wired microphone such as the RE20 falls under all other products. An extension of up to five years needs registration and is not stored.7Maker spec sheet (PDF)products.electrovoice.com/download/975639Read 15 October 2026Warranty conditions for Electro-Voice products, EMEA, version V1.0 of 2019-03-13: three years for all other products. The North America version lists the same three years, at https://shop.ccisolutions.com/StoreFront/jsp/pdf/EVI_warranty.pdf.

2years1Maker product pagerode.com/en-us/products/podmicRead 15 October 2026The product data has warranty 2 and the page shows a 2 Year Warranty icon. Whether the 2 years need a registration was not checked for this model.

Both are also in the API. Back to all microphones.