Microphones / Compare

Electro-Voice RE20 vs Shure MV7X

A

Product A: Electro-Voice

RE20

25 of 61 known

Change Electro-Voice RE20

Compare the Shure MV7X with

Search microphones

B

Product B: Shure

MV7X

29 of 61 known

Change Shure MV7X

Compare the Electro-Voice RE20 with

Search microphones

All 61 fields

Every value links to where we found it.

Only differences

AElectro-Voice RE20

BShure MV7X

General

4 of 8 differ

Series

RE Broadcast Series1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Series / Family: RE BROADCAST SERIES.

MOTIV1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026Page data: product series MOTIV.

Model numbersiMaker identifiers for this exact model and its listed variants. Excludes sibling models and other generations.

RE20, RE20-BLACK, F.01U.413.981, F.01U.411.9061Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page data lists the part numbers F.01U.411.906 and F.01U.413.981. The variant selector shows RE20 Beige and RE20 Black. The black part number F.01U.411.906 is also the maker part number of the RE20-BLACK in retailer feeds. The beige F.01U.413.981 is the part number retailers give for the classic fawn beige RE20. The older part numbers F.01U.117.389 and 16207816 are not stored.8Retailer pageavlgear.com/products/electro-voice-re20-broadcast-announcer-microphone-black.jsonRead 15 October 2026The SKU carries the maker part number F01U411906 for the RE20-BLACK.

MV7X, MV7X-CHN, MV7X-J1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026Page data lists the SKUs MV7X, MV7X-CHN, MV7X-J, MV7X-BL, MV7X-GR and MV7X-RD. The spec sheet lists only MV7X, MV7X-CHN and MV7X-J as available SKUs, so those three are stored.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026Available SKUs: MV7X, MV7X-CHN and MV7X-J, each described as an XLR dynamic podcasting microphone.

GTIN / EAN

8005493764648Retailer pageavlgear.com/products/electro-voice-re20-broadcast-announcer-microphone-black.jsonRead 15 October 2026Retailer feed: barcode 800549376464 for SKU EV-RE20BLACK-F01U411906, the black RE20-BLACK. ADI Global and an eBay listing print the same UPC for F.01U.411.906. The check digit is valid. The beige RE20 is not stored because retailers print 800549414463 and 800549385008 for it.

0424067380711Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026UPC in the page data for the MV7X SKU: 042406738071.

AnnouncediThe maker's first announcement of this model. This is separate from first retail availability.

Not available

Not available

Status

Available1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page shows the RE20 with a Where to buy button. Electro-Voice price lists are not on the page.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026The classic RE20 finish continues to be available under the current RE20 model name.

Available1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026Page data life cycle status: available. The page has an Add to Cart button at 199 USD.

PredecessoriThe model this one directly replaced, in the same line, tier and size, as the maker or a trusted review names it.

Not available

Not available

SuccessoriThe model that directly replaced this one, in the same line, tier and size. A revision such as a Slim or OLED model does not count when a next generation exists.

Not available

Not available

Launch price (US)iThe maker's US launch MSRP for the stated configuration, excluding tax. Current store prices and later discounts do not qualify.

Not available

$1794Press articleradioworld.com/tech-and-gear/products/shure-ships-podcast-microphoneRead 15 October 2026The product notice says Price: $179. A US price is shown without tax.5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026Review spec box: price $179 USD.

Launch price (EU)iThe maker's euro launch price for the stated configuration, including VAT as published. Current store prices and later discounts do not qualify.

Not available

€1796Reviewbonedo.deRead 15 October 2026German news item of 2021-10-01: available now at 179 Euro. A German price is shown as published, including VAT.

MarketsiISO country or region codes where this exact model or variant is sold. A source page's language does not establish availability.

Not available

Not available

ColoursiThe maker's own colour names

Beige, Black1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Variant selector: RE20 Beige and RE20 Black. The spec table prints the colour Fawn beige. The black finish is dark charcoal.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026The RE20-BLACK is a new colour option in a low-reflection dark charcoal finish. The classic finish stays on sale under the RE20 name.

Not available

Microphone typeiElectret condensers count as condenser.

Dynamic1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Element Type: Dynamic.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Generating Element: Dynamic.5Spec databaserecordinghacks.com/microphones/electro-voice/re20Read 15 October 2026Tags: dynamic.

Dynamic1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026Page data transducer type: dynamic.2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Specifications: dynamic (moving coil).

Capsule and pickup

0 of 4 differ

Capsule sizeiDiaphragm diameter of one capsule as published. A 1-inch capsule is 25.4 mm.

Not available

Not available

CapsulesiNumber of capsules. Multi-pattern USB microphones often use three.

11Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page names one large Acoustalloy diaphragm in the singular and prints no capsule count. One is the reading of a single dynamic element.

12Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026The guide says the MV7X features a dynamic capsule with a cardioid pattern. It prints no capsule count, so one is the reading of a single dynamic capsule.

Polar patternsiEvery pattern the user can select. Unidirectional is used only when the maker names no exact pattern.

Cardioid1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Polar Pattern: Cardioid.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Polar Pattern: Cardioid.

Cardioid2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Specifications: unidirectional (cardioid).4Press articleradioworld.com/tech-and-gear/products/shure-ships-podcast-microphoneRead 15 October 2026Dynamic cardioid microphone.

Address typeiEnd address means you speak into the top of the microphone. Side address means you speak into its side.

End address2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Singers close talk the microphone with their lips almost touching the grille screen, which is at the top end of the body.5Spec databaserecordinghacks.com/microphones/electro-voice/re20Read 15 October 2026Tags include end-address. The page lists the RE20 as dynamic with a Variable-D design.

End address1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026Page data form factor: end address, small diaphragm.

Sound specs

3 of 10 differ

Frequency responseiPublished acoustic range of the microphone. A sample rate does not establish it.

Min45 HzMax18 kHz1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Frequency Response: 45 Hz - 18,000 Hz.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Frequency Response: 45 - 18,000 Hz.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: 45 to 18,000 Hz.

Min50 HzMax16 kHz2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Specifications: 50 Hz to 16,000 Hz. The typical frequency response chart is shown on page 5. No tolerance is printed.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 202650 Hz to 16,000 Hz.

Sensitivity (analog)iAnalog output level for 94 dB SPL at 1 kHz, as published in dBV. For a microphone with a switchable preamp, the bypass value is used. A value published only in mV/Pa is converted as 20 x log10(mV/Pa / 1000) and rounded to one decimal, so 1.6 mV/Pa is -55.9 dBV/Pa. The printed value goes in the source note. A sensitivity in plain dB with no reference, as many low-cost USB microphones print it, is left out.

Not available

-55dBV/Pa2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Specifications: -55 dBV/Pa (1.78 mV) at 1 kHz, open circuit voltage, 1 Pa = 94 dB SPL. The output is a passive XLR output, so no preamp gain is involved.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026XLR sensitivity -55 dBV/Pa (1.78 mV) at 1 kHz, 1 Pa = 94 dB SPL. The row also reads at minimum gain, flat mode, which is a wording left over from the MV7 sheet, since the MV7X has no gain stage.

Sensitivity (digital)iDigital output level over USB for 94 dB SPL at 1 kHz. The minimum gain value is used when several are given. The gain setting goes in the source note. On a USB-only microphone use this field only when the maker prints dBFS or ties a dBV value to the USB output, as Shure does for the MV7i. A dBV, dB re 1 V/Pa or mV/Pa value that names no USB output is left out. The printed unit and the gain go in the source note. A value printed for another reference level is converted by the level difference, so -40 dBFS at 80 dB SPL is -26 dBFS at 94 dB SPL. The printed value goes in the source note.

Not available

Not available

Max SPLiHighest sound pressure level at the source's distortion limit. The THD level and output path go in the source note. The value without a clipping protection mode such as Clipguard is used when both are given. The value with the pad off is used. When the maker lists several preamp loads, the highest load is used. The load goes in the source note. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for sensitivity.

Not available

Not available

Max SPL distortion limitiThe distortion level at which the maker states the max SPL, e.g. 1, 3 or 10 % THD. Left out when the maker names none. Max SPL figures compare only at the same limit.

Not available

Not available

Self-noiseiEquivalent noise level, A-weighted, in dB SPL. Lower is quieter. The analog value is used when analog and digital values are both given. A value in dBV or dBFS is left out. On a USB microphone that prints values per gain setting, the minimum gain value is used, as for max SPL.

Not available

Not available

Digital noise flooriDigital noise floor of a USB microphone as printed, usually A-weighted over 20 Hz to 20 kHz. Lower is quieter. Processing that was on during the test goes in the source note. It is not self-noise.

Not available

Not available

Signal-to-noise ratioiAs published. Reference level and weighting go in the source note. The microphone's own figure, not the SNR of a built-in headphone amplifier.

Not available

Not available

Dynamic rangeiAs published. The distortion level goes in the source note. The value without a clipping protection mode is used when both are given. Use the same pad setting, preamp load and gain as for max SPL.

Not available

Not available

Output impedanceiRated impedance of the XLR output. For a microphone with a switchable preamp, the bypass value is used. A USB-only microphone has no value here, even when the maker prints an impedance for the capsule. When the maker prints a rated and an actual impedance, as Shure does for the SM58, the rated value is stored and the actual one goes in the source note.

150Ω1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Nominal Impedance: 150 ohms balanced. The old data sheets say the microphone is wired for 150 ohms and can be rewired for 50 or 250 ohms by a solder change. The shipped 150 ohm value is stored.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Impedance: 150 ohms balanced.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: impedance 150 ohms.

252Ω2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Specifications: output impedance 252 ohm. The spec sheet adds at 1 kHz.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026XLR output impedance 252 ohm at 1 kHz.6Reviewbonedo.deRead 15 October 2026The news item gives 252 ohm at 1 kHz. Its frequency range of 16 Hz is a typo against the maker's 50 Hz.

Connectivity

0 of 7 differ

OutputsiOutputs that carry the microphone signal to a computer, interface or mixer. A headphone jack does not count. Wireless is a radio link to a receiver, such as 2.4 GHz.

XLR1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The spec data and the Wikipedia article list a three-pin XLR output only.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: three-pin male XLR connector.

XLR1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026The page says to connect via XLR. No other output is listed.2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026MV7X Output: passive XLR output for mixers and interfaces. No USB output.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026Connector type: XLR.4Press articleradioworld.com/tech-and-gear/products/shure-ships-podcast-microphoneRead 15 October 2026A dynamic cardioid microphone with an XLR connector mounted on the rear. The output is analog.

Inputs for other sourcesiInputs on the microphone for another microphone or instrument, which it sends to the computer with its own signal.

Not available

Not available

USB and XLR at onceiBoth outputs carry audio at the same time.

Not available

Not available

USB portiUSB socket on the microphone. USB-B is the full-size square socket. A Micro-B socket is Micro-USB, even when the maker writes USB-B.

Not available

Not available

Cable host plugiPlug on the computer end of the included USB cable. An included adapter is listed in In the box.

Not available

Not available

Cable lengthiLength of the included USB cable.

Not available

Not available

Phantom poweriPhantom power for the XLR output. Optional means some XLR modes work without it, for example a built-in preamp in bypass. Supplies means the microphone gives 48 V phantom power to a microphone on its XLR input.

Not required1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Plug in and go: delivers studio condenser response with no powering required.

Not required5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026The review says the MV7X is dynamic and therefore does not require phantom power.

Digital audio

None of 3 known

Max bit depthiHighest recording bit depth over USB.

Not available

Not available

Max sample rateiHighest recording sample rate over USB. This is not the frequency response.

Not available

Not available

32-bit float recordingiRecords over USB in 32-bit floating point. A 32-bit integer format does not count.

Not available

Not available

Monitoring

0 of 2 differ

Headphone outputiA headphone jack on the microphone.

No1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The spec data lists no headphone output. The RE20 is a passive dynamic microphone with a single XLR output.

No5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026The only port on the microphone is an XLR output, and it has no switch or button.

Zero-latency monitoringiThe headphone output plays the microphone signal directly, before it reaches the computer.

Not available

Not available

Controls and processing

1 of 2 differ

Onboard controlsiFunctions you can change on the microphone itself, by knob, button, switch or touch. Settings that exist only in the app do not count. A switch that sets preamp gain steps, such as +18 or +28 dB, counts as gain. Echo is a knob or button for an echo or reverb effect.

Not available

Not available

Onboard processingiProcessing inside the microphone, analog or digital, that works without the maker's app running. A maker statement that settings are saved in the microphone counts. Effects that run only in the app on the computer do not count. An expander counts as noise gate. Clip protection such as Clipguard is clip protection. Limiter is only for a limiter the maker lists as its own effect, never both for one feature. Brand names such as APHEX or Clipguard go in the source note. Attenuation pad is a switch that lowers the capsule output, such as -15 dB. Echo is an echo or reverb effect in the microphone. Exciter or bass enhancer covers effects that add harmonics or bass, such as APHEX Aural Exciter and Big Bottom.

High-pass filter1Maker product pageelectrovoice.com/product/re20Read 15 October 2026The page names a bass-tilt switch. The data sheet describes a passive network that tilts the low frequencies down 4.5 dB from 400 to 100 Hz. Wikipedia and RecordingHacks call it a high-pass filter below 400 Hz. Stored as high_pass_filter, the same way the SM7B bass rolloff is stored.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Architects and engineers specification: when the filter switch is on, low-frequency response tilts down 4.5 dB from 400-100 Hz. With the switch off, the response is flat from 80-6,000 Hz.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026Mid-bass tone-shaping switch.4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026A switch tailors the mid-bass response and attenuates below 400 Hz with a mild high-pass filter.5Spec databaserecordinghacks.com/microphones/electro-voice/re20Read 15 October 2026The page lists a switchable high-pass filter below 400 Hz.

Not available

Mounting and accessories

2 of 4 differ

Mount threadsiStand threads the microphone or its included mount accepts, also with an included adapter.

Not available

5/8 inch, 3/8 inch2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026The microphone comes with a 5/8 in-27 threaded mount. The furnished accessories list a brass adapter, which the Shure page names a 5/8 in to 3/8 in Euro thread adapter.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026Mounting type: 5/8 in-27 thread mount. The features say the integrated yoke fits standard 5/8 in-27 threaded stands or booms.6Reviewbonedo.deRead 15 October 2026A 5/8 inch thread, or a 3/8 inch thread with the adapter, fits every common stand.

Shock mountiInternal is suspension inside the body. Included is a separate shock mount in the box. A cradle or ring mount that comes fitted to the microphone or its stand is included, even when the maker calls it built-in. A microphone with internal suspension and a separate shock mount in the box is included.

Internal1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Part of the integral blast and wind filter also shock mounts the internal microphone element, per the data sheet. The launch post and retailers say the element has an internal shock mount.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Part of the filter also shock mounts the internal microphone element, reducing the transfer of vibrations from external sources.

Internal1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026Voice Isolation Technology combines a dynamic cartridge, rear rejection and a shock mount in the microphone. The box list has no separate shock mount.5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026The review names Voice Isolation as the cardioid pickup, the dynamic cartridge and the internal shock mount.6Reviewbonedo.deRead 15 October 2026The news item says the shock mount helps to remove disturbing influences.

Pop filteriPop protection built in or in the box.

Internal1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Integral blast and wind filter tames hard consonants without an add-on screen. An internal pop filter tames plosives.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026An integral blast and wind filter covers each acoustic opening, so singers can close talk with their lips almost touching the grille.3Press releaseelectrovoice.com/articles/news/2020/electro-voice-introduces-re20-blackRead 15 October 2026Integrated pop filter.

Foam windscreen2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026The guide has a Windscreen section: the windscreen offers maximum protection from plosives. A black windscreen (AMV7-K-WS) is listed under replacement parts, so one is fitted to the microphone. The Shure photos and SoundGuys show it covering the grille.5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026An all-metal build with a small mic grille covered by a removable windscreen. Shure sells replacement windscreens and grilles.

Desk stand includediA desk stand or base in the box. A yoke alone does not count. A boom arm does not count either. In the box names it.

No1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Included Accessories: 81715 stand clamp only. A clamp is not a desk stand.

No1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026The box list has no stand. The microphone has a fixed yoke.5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026The microphone comes with an adjustable yoke mount but not with a stand or an XLR cable.

Design and build

1 of 3 differ

Housing material

Steel1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Case Material: Steel.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Case Material: Steel.

All-metal construction2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Specifications, Housing: all metal construction.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026Housing: all-metal construction.

RGB lightingiDecorative lighting. Status and mute lights alone do not count. RGB lighting is lighting with no function. A level meter or mute indicator is not RGB lighting, even when its colour can be chosen. Lighting that changes colour on its own counts, even when it also turns off on mute.

Not available

Not available

Lighting zonesiIndependently controllable lighting areas.

Not available

Not available

Software

None of 2 known

SoftwareiThe maker's app for the microphone.

Not available

Not available

User firmware updatesiA public updater or a documented firmware update procedure exists for this exact model.

Not available

Not available

Compatibility

None of 2 known

Works withiOperating systems the maker lists for USB audio. App support can be narrower.

Not available

Not available

ConsolesiConsoles the maker lists for USB audio.

Not available

Not available

Dimensions and weight

2 of 3 differ

Microphone dimensionsiMicrophone body without a stand or a detachable shock mount. A fixed yoke is included. Width is left to right as seen by the speaker, height is bottom to top in normal use and depth is front to back. Orient the microphone as in use on its yoke or stand. Depth is the direction it points at the speaker, height is up and width is across. An upright side-address microphone has its length as height. An end-address microphone has its length as depth, also when it is held in the hand. A round microphone with only a length and a diameter uses the diameter for the other two sides. The source note states the mapping.

Width54.4Height54.4Depth216.7mm(2.1 × 2.1 × 8.5 in)2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Dimensions: length 216.7 mm (8.53 in), widest diameter 54.4 mm (2.14 in), body diameter 49.2 mm (1.94 in). The RE20 is a round end-address microphone used pointing at the speaker, so the 216.7 mm length is the depth and the 54.4 mm widest diameter is both width and height. The body diameter 49.2 mm is not stored.

Width90.2Height164Depth153.6mm(3.6 × 6.5 × 6 in)2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Overall dimensions drawing, page 5, with the yoke and its mount post: 153.6 mm long, 90.2 mm wide across the yoke and 164.0 mm high. The microphone points along its length, so the length is the depth. The spec sheet writes the same three numbers as 164 x 153.6 x 90.2 mm H x L x D.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026Dimensions, mic in yoke: 164 x 153.6 x 90.2 mm H x L x D. The row for the microphone alone prints a length of 53.6 mm, which is a typo for the 153.6 mm of the guide drawing, and a diameter of 66.5 mm. The guide drawing shows 153.6 mm as the microphone length and 90.2 mm as the width across the yoke.5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026Review spec box: 164.0 x 153.6 x 90.2 mm, the maker numbers.

Microphone weightiWithout stand, detachable shock mount and cable. A fixed yoke is included.

737g(1.6 lb)1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Net weight: 1 lb, 10 oz (737 g). Shipping weight 3 lb, 4 oz (1474 g) is not stored.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Net Weight: 737 g (1 lb, 10 oz).4Spec databaseen.wikipedia.org/wiki/Electro-Voice_RE20Read 15 October 2026Spec table: net weight 737 g.

550g(1.2 lb)2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Specifications, net weight: 0.55 kg (1.21 lbs), stored as 550 g. The yoke is part of the microphone.3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026Net weight 0.55 kg (1.21 lbs).5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026Review spec box: 550 g without a mic stand.6Reviewbonedo.deRead 15 October 2026The news item says the scale shows 550 g.

Weight with standiWith the included stand or mount attached, without the cable. An included shock mount between the microphone and the stand counts.

Not available

Not available

Certifications

1 of 1 differ

Other certifications

Not available

CE2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Certifications: the product meets the essential requirements of relevant European directives and is eligible for CE marking.

In the box

1 of 1 differ

In the box

RE20 microphone, 81715 stand clamp1Maker product pageelectrovoice.com/product/re20Read 15 October 2026Included Accessories: 81715 stand clamp. The optional 309A shock-mounted stand adapter is not included.2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Accessories Furnished: 81715 stand clamp. The 2006 sheet also lists a 309A shock-mounted stand adapter as an optional accessory.8Retailer pageavlgear.com/products/electro-voice-re20-broadcast-announcer-microphone-black.jsonRead 15 October 2026What's Included: Electro-Voice RE20-BLACK Microphone and 81715 Stand Clamp.

MV7X, 5/8" to 3/8" Euro Thread Adapter1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026Page data box list: 1 x 3/8 in Euro thread adapter. The furnished accessories field says 5/8 in to 3/8 in Euro thread adapter. The microphone itself is added to the list.2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Furnished accessories: brass adapter 31B1856. The guide is version 1.2 (2021-J).

Links

Not compared

Product page

www.electrovoice.com/product/re201Maker product pageelectrovoice.com/product/re20Read 15 October 2026

www.shure.com/en-US/products/microphones/mv7x1Maker product pageshure.com/en-US/products/microphones/mv7xRead 15 October 2026

Spec sheet

im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdf2Maker spec sheet (PDF)im.static-thomann.de/pics/atg/atgdata/document/manual/233781.pdfRead 15 October 2026Electro-Voice RE20 spec sheet, Part Number 534678 Rev D, Telex Communications 6/2006, mirrored by Thomann. It is the most recent RE20 data sheet that could be opened. The current maker site hides its data sheet download behind a script.

content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdf3Maker spec sheet (PDF)content-files.shure.com/publications/specSheet/en/mv7x-spec-sheet.pdfRead 15 October 2026Shure's one-page MV7X spec sheet, 2021.

Manual

Not available

pubs.shure.com/guide/MV7X/en-US2Owner's manualpubs.shure.com/view/guide/MV7X/en-US.pdfRead 15 October 2026Shure online user guide for the MV7X at pubs.shure.com. The PDF edition of the same guide was read for the specifications.

EPREL registration numberiId in the EU energy label database. Each size or model of a series has its own id, so it is per variant.

Not available

Not available

Warranty

1 of 1 differ

Manufacturer warranty (source market)iThe maker's warranty period for the exact SKU or configuration and market named in the source note. It applies only to that stated market, not every regional variant. Statutory consumer rights are excluded. The base term is stored. An extension that needs registration goes in the source note.

3years6Maker product pageelectrovoice.com/support/warrantyRead 15 October 2026The page links the Electro-Voice warranty conditions for North America and EMEA. Both state a warranty of three years for all other products, with only loudspeakers, loudspeaker accessories and the R300 and RE3 wireless microphones named separately. A wired microphone such as the RE20 falls under all other products. An extension of up to five years needs registration and is not stored.7Maker spec sheet (PDF)products.electrovoice.com/download/975639Read 15 October 2026Warranty conditions for Electro-Voice products, EMEA, version V1.0 of 2019-03-13: three years for all other products. The North America version lists the same three years, at https://shop.ccisolutions.com/StoreFront/jsp/pdf/EVI_warranty.pdf.

2years5Reviewsoundguys.com/shure-mv7x-review-65199Read 15 October 2026The review says the MV7X comes with a two-year warranty. The review prices are US dollars. Shure's legal page says its limited warranty runs one or two years depending on the product and does not name the MV7X, so the review term is stored.

Both are also in the API. Back to all microphones.