arkivoAPI
Menu

Monitors / Compare

KTC M27T6S vs ViewSonic XG2431

Product A: KTC

M27T6S

102 of 172 known
Change KTC M27T6S

Compare the ViewSonic XG2431 with

Product B: ViewSonic

XG2431

95 of 172 known
Change ViewSonic XG2431

Compare the KTC M27T6S with

86 of 164 fields differ

Download CSVDownload JSON
  • 43 different values
  • 43 known for one only
  • 30 the same
  • 48 missing for both

Biggest differences

Each bar uses the scale of all 179 monitors.

  1. Power use (max)Lower is betterA: 102WB: 52WViewSonic is 50 W lower.
  2. Brightness (typical, SDR)A: 450nitsB: 350nitsKTC is 100 nits higher.
  3. Pixel densityA: 108.8ppiB: 91.8ppiKTC is 17 ppi higher.
  4. Refresh rateA: 210HzB: 240HzViewSonic is 30 Hz higher.

Refresh rate per resolution

The best rate over any port. Bars run from 0 to 1200 Hz.

3840 × 2160
ANot listed
B60Hz
2560 × 1440Native for A
A210Hz
BNot listed
1920 × 1080Native for B
ANot listed
B240Hz

Size, drawn to scale

Front and side. Solid lines show the stand at its lowest. Dashed lines show it at its highest.

Weight

0 to 15 kg

Weight with stand
A6.55kg
B6.8kg
Box weight
A9.1kg
B8.6kg

All 172 fields

Every value links to where we found it.

AKTC M27T6S
BViewSonic XG2431

General

4 of 8 differ
Series
Not available
Elite8Press articletftcentral.co.uk/news/viewsonic-announce-range-of-new-monitors-in-their-elite-gaming-line-up-including-xg320u-xg320q-xg271qg-and-xg2431Read 10 October 2026TFTCentral news item groups the XG2431 in ViewSonic's Elite gaming line-up, from the CES 2021 announcement.
Model numbers
M27T6S1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Exact current US reference M27T6S. The older M27T6 VA model and other regional revisions are not treated as variants or hardware donors.
XG2431, VS185333Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Cover page: Model No. VS18533, P/N XG2431.
GTIN / EAN
Not available
Not available
Announced
Not available
11 January 20218Press articletftcentral.co.uk/news/viewsonic-announce-range-of-new-monitors-in-their-elite-gaming-line-up-including-xg320u-xg320q-xg271qg-and-xg2431Read 10 October 2026TFTCentral news of 11 January 2021 reports the CES 2021 announcement via Business Wire.
Status
Available1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Exact US store offers Add To Cart and shipping within 1–4 business days. The older European EPREL record ending Union placement does not establish discontinuation of this US product.
Available1Maker product pageviewsonic.com/global/products/lcd/XG2431Read 10 October 2026Current maker product page lists the model with its full specification table. No end-of-life notice on the page.
Predecessor
Not available
Not available
Successor
Not available
Not available
Launch price (US)
Not available
Not available
Launch price (EU)
Not available
Not available
Markets
US1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Selected US manufacturer store reference. No cable or regional warranty inheritance from other markets.
US, CA4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Review says it is released in the USA and Canada and not in the UK or Europe.
Colours
White1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Manufacturer hero alt text names White. The independently reviewed finish is described as very light gray. White is retained as the maker colour name.
Not available
Segment
Gaming1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Gaming1Maker product pageviewsonic.com/global/products/lcd/XG2431Read 10 October 2026Maker title: gaming monitor.

Display

7 of 12 differ
Screen size
27in(68.6 cm)1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
24in(61 cm)1Maker product pageviewsonic.com/global/products/lcd/XG2431Read 10 October 2026Display Size (in.): 24. Viewable area is 23.8 in.
Viewable screen diagonal
Not available
23.8in(60.5 cm)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Viewable Area (in.): 23.8. The user guide table also says 24.5 in, but its active area of 527.04 x 296.46 mm gives a 23.8 in diagonal.
Native resolution
2560 × 1440px1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
1920 × 1080px2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Resolution: 1920 x 1080.
Aspect ratio
16:91Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
16:92Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Aspect Ratio: 16:9.
Pixel density
108.8ppi
91.8ppi
Pixel pitch
0.2331mm1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Both horizontal and vertical pixel pitch explicitly 0.2331 mm.
0.2745mm3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Specifications table: 0.2745 mm horizontal and vertical. The product page rounds it to 0.275 mm.
Active display area
Width596.736Height335.664mm(23.5 × 13.2 in)2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original technical table explicitly Visible area 596.736 by 335.664 mm. Not inferred from pitch or diagonal.
Width527.04Height296.46mm(20.7 × 11.7 in)3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Specifications table: Display Area, Full Scan (H x V).
Curved
No1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
No2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Curvature: Flat.
Curvature radius
Not available
Not available
Screen surface
Matte3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact reviewed USA-1.0.1 unit has a 25% low-haze matte anti-glare surface, corroborating maker haze specification. This does not establish a separate anti-reflection treatment.10Reviewpcgamer.com/hardware/gaming-monitors/ktc-m27t6s-reviewRead 8 October 2026Exact PC Gamer review independently describes matte anti-glare coating.
Matte2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Surface Treatment: Anti-Glare, Hard Coating (3H). Anti-glare is mapped to matte.
Anti-reflection coating
Not available
Anti-Glare, Hard Coating (3H)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Surface Treatment, verbatim.
Touchscreen
Not available
Not available

Panel

19 of 31 differ
Panel type
Fast IPS1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Manufacturer expressly Fast IPS. Not the VA panel in the older M27T6. The Fast IPS name maps to the fast_ips option.
Fast IPS1Maker product pageviewsonic.com/global/products/lcd/XG2431Read 10 October 2026Overview: Fast-IPS display. TFTCentral also calls it a Fast IPS panel.
Panel type (as published)
Fast IPS1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
IPS Technology2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Panel Type row, verbatim.
Backlight
Mini-LED1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Edge-lit LED5Reviewtomshardware.com/reviews/viewsonic-xg2431-reviewRead 10 October 2026Spec table: IPS / W-LED, edge array. The maker states only a LED light source.
Local dimming
Yes1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
No4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026HDR Gaming section: no backlight local dimming.
Dimming zones
1,1521Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Not available
Panel maker
Not available
BOE4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Response Times and Gaming section. PC Monitors also names the BOE MV238FHM-NG2.
Panel part number
Not available
MV238FHM-NG24Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Response Times and Gaming section: panel from BOE (MV238FHM-NG2).
Panel generation
Not available
Not available
Subpixel layout
RGB stripe3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact microscope photograph shows repeated adjacent vertical red, green and blue columns in RGB stripe arrangement. Geometry is directly visible, not inferred only from RGB channel order.
RGB stripe3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Specifications table: Color Filter, RGB vertical stripe.
Colour depth
10bits1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker explicitly true 8-bit plus FRC, which provides 10 supported bits per channel through temporal dithering. Not native 10-bit.
8bits2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Color Space Support: 8 bit true.
Colour depth method
FRC1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Explicit 8-bit plus FRC implementation, corroborated by the exact tested review.
Native2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Maker says 8 bit true. Tom's Hardware lists 8-bit (6-bit+FRC) and TFTCentral says an 8-bit panel with FRC for 10-bit input, so the panel method differs between sources.7Reviewdisplayninja.com/viewsonic-xg2431-reviewRead 10 October 2026Specifications: 16.7 million colors, true 8-bit.
Displayable colours
1.07 billion1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
16.7 million2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Colors: 16.7M.
sRGB coverage
100%1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Explicit gamut coverage 100% sRGB, CIE 1931. Separate 157% gamut volume is not coverage.
Not available
DCI-P3 coverage
98%1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Explicit gamut coverage 98% DCI-P3, CIE 1976. Separate 121% volume is excluded.
Not available
Adobe RGB coverage
99%1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Explicit 99% Adobe RGB coverage, CIE 1976. Separate 130% volume is excluded.
Not available
Rec. 2020 coverage
Not available
Not available
NTSC coverage
97%1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Explicit 97% NTSC coverage. Reference year and coordinate basis are not published. Separate 111% volume is not substituted.
Not available
Factory calibrated
Yes1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Exact maker states factory-calibrated and Demura verified. A physical report is independently established by the reviewed package.
Not available
Claimed Delta E
21Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker claim Delta E less than 2. It does not state reference space, average versus maximum, formula or detailed test settings.
Not available
Paper calibration report in box
Yes3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact review package inventory explicitly includes a factory calibration report. This is a physical included report, not software or a menu report.
Not available
Hardware calibration support
Not available
Not available
Static contrast ratio
1,000:11Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Typical native SDR static contrast 1000:1. The 1000000:1 HDR processing claim is separate and excluded.
1,000:12Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Static Contrast Ratio: 1,000:1 (typ). The 80M:1 dynamic figure is not used.
Brightness (typical, SDR)
450nits1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker SDR specification 450 nits. Window size, picture mode, average picture level and duration are not stated.
350nits2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Brightness: 350 cd/m2 (typ).
Brightness (maker minimum)
Not available
Not available
Peak brightness (HDR)
1,000nits1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker explicitly HDR1000 peak brightness of 1000 nits. Window size, average picture level, HDR mode and time limit are not stated. No 1400-nit peak is inferred from certification.
Not available
HDR peak test window
Not available
Not available
Full-screen brightness
Not available
Not available
HDR formats
HDR103Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact HDR10 signal support is independently described by Tom's Hardware. The tested review describes Windows HDR operation and HDR modes. HDR10+ and Dolby Vision are not inferred.5Reviewtomshardware.com/monitors/gaming-monitors/ktc-m27t6s-27-inch-qhd-mini-led-gaming-monitor-reviewRead 8 October 2026Exact M27T6S review explicitly says HDR modes work when an HDR10 signal is present. No other HDR format is inferred.
HDR102Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026High Dynamic Range: HDR10.
HDR certification
DisplayHDR 14007Certification listdisplayhdr.org/certified-productsRead 8 October 2026Current official VESA DisplayHDR 1400 section lists Shenzhen KTC M27T6 with M27T6S explicitly among its certified family models, CTS 1.1. Current exact US maker images and both independent reviews instead identify DisplayHDR 1000. The current registry is used for formal certification because it explicitly names M27T6S and no documented region or hardware revision exclusion was found. The conflicting lower maker/review naming is preserved. No peak brightness value is derived from the tier and no VA sibling hardware is inherited.
DisplayHDR 4001Maker product pageviewsonic.com/global/products/lcd/XG2431Read 10 October 2026Key features: Fast-IPS display with VESA DisplayHDR 400.
Viewing angle (horizontal)
178°1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
178°2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Viewing Angles: 178 horizontal.
Viewing angle (vertical)
178°1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
178°2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Viewing Angles: 178 vertical.

Refresh rate and motion

13 of 22 differ
Refresh rate per resolution and port
AKTC M27T6S
Refresh rate per resolution and port. The top rate is in bold.
ResolutionHDMI 2.0DisplayPort 1.4
2560 × 1440Native144Hz8-bit210Hz
Source2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original guide states maximum native 2560x1440 at 144 Hz HDMI and 200 Hz DisplayPort with 210 Hz overclock possible. The stored DP maximum requires OSD overclock. Normal 200 Hz operation remains in the separate native refresh field. Cable and graphics source must support the chosen mode. Bit depth, chroma and DSC for DP maxima remain unknown.4Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact review explicitly HDMI 1440p at 144 Hz limited to 8-bit colour. DP 200/210 Hz bit depth is not explicitly scoped in the original guide, so no DP 10-bit rate is inferred.10Reviewpcgamer.com/hardware/gaming-monitors/ktc-m27t6s-reviewRead 8 October 2026Exact review confirms HDMI maximum 144 Hz separately from 210 Hz DP overclock.
BViewSonic XG2431
Refresh rate per resolution and port. The top rate is in bold.
ResolutionHDMI DisplayPort 1.4
3840 × 216060HzNot available
1920 × 1080Native240Hz240Hz
Source2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Input Signal: vertical frequency 48 to 240 Hz on HDMI and DisplayPort. The user guide lists 1920 x 1080 at 240 Hz as the recommended mode and Tom's Hardware says 240 Hz works over both inputs. TFTCentral says a virtual 4K input is accepted and limited to 4K at 60 Hz over HDMI. Bit depth, chroma and DSC are not stated.
Max refresh rate
210Hz
240Hz
Max refresh rate at native resolution
210Hz
240Hz
Max refresh rate over DisplayPort
210Hz
240Hz
Max refresh rate over HDMI
144Hz
240Hz
Max refresh rate over USB-C
Not available
Not available
Max refresh rate at 10-bit
Not available
Not available
Native refresh rate
200Hz1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
240Hz2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Refresh Rate (Hz): 240.
Overclocked refresh rate
210Hz1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Not available
Dual mode
Not available
Not available
Minimum fixed refresh rate
Not available
Not available
Adaptive sync technologies
Adaptive-Sync, FreeSync1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Exact maker publishes Adaptive Sync and FreeSync support. Its G-Sync compatibility language is not treated as formal NVIDIA certification. No VESA AdaptiveSync certification or AMD Premium tier is inferred.
FreeSync Premium, G-SYNC Compatible2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Variable Refresh Rate Technology: FreeSync Premium, G-Sync compatible. TFTCentral and Tom's Hardware say it was not yet NVIDIA certified when reviewed in 2022, and G-Sync works over DisplayPort.
VRR range per port
AKTC M27T6S
Not available
BViewSonic XG2431
InputMin (Hz)Max (Hz)
DisplayPort48240
HDMI48240
Source5Reviewtomshardware.com/reviews/viewsonic-xg2431-reviewRead 10 October 2026Tom's Hardware: FreeSync runs from 48 to 240 Hz and works over either interface. TFTCentral confirms 48 to 240 Hz and FreeSync over HDMI.
Low framerate compensation
Yes3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact independently tested USA-1.0.1 unit uses LFC below its 48 Hz VRR floor, refreshing at multiples of the frame rate. This is direct functional evidence, not a certification inferred from generic FreeSync.
Yes4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Review: range of 48 to 240 Hz supported with LFC. PC Monitors also lists a 48 to 240 Hz VRR range plus LFC.
Response time (maker GtG claim)
Not available
1ms2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Response Time (Typical GTG): 1 ms.
Response time (maker MPRT claim)
1ms1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Explicit 1 ms MPRT claim, not grey-to-grey. Generic 1 ms wording and secondary GTG labels are not used to create a separate manufacturer GtG claim.
0.5ms1Maker product pageviewsonic.com/global/products/lcd/XG2431Read 10 October 2026Overview: The <0.5ms MPRT response time. Published as less than 0.5 ms.
Overdrive settings
Off, Standard, Advanced, Ultra Fast, Dynamic Overdrive3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact tested menu identifies Off, Standard, Advanced, Ultra Fast and Dynamic Overdrive. Dynamic Overdrive performed like Off in this reviewed firmware and is not presumed to provide effective variable OD.
Standard, Advanced, Ultra Fast3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026OSD menu tree, Manual Image Adjust, Response Time.
Motion blur reduction
Yes3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact test establishes dedicated backlight strobing through MPRT. It requires a fixed refresh rate of at least 100 Hz and cannot run with HDR or VRR.
Yes1Maker product pageviewsonic.com/global/products/lcd/XG2431Read 10 October 2026PureXP motion blur reduction feature, Blur Busters Approved 2.0.
Blur-reduction technology
MPRT3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026
PureXP3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026OSD Setup Menu: PureXP with Light, Normal, Extreme and Ultra settings. TFTCentral calls it PureXP+.
Blur reduction works with VRR
No3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact reviewed MPRT cannot run with VRR, corroborated by Tom's Hardware saying it cancels Adaptive-Sync.
No4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Blur Busters Approved 2.0 section: PureXP+ cannot be used at the same time as VRR, and FreeSync must be switched off first.
Flicker-free (claimed)
Yes1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker expressly Flicker free Support. Backlight strobing intentionally flickers and is separately scoped by the review.
Yes2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Flicker-Free: Yes. TFTCentral found no PWM at any brightness setting.
Black frame insertion
Not available
Not available

Measured

6 of 12 differ
Input lag at maximum refresh rate
2.89ms3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact USA-1.0.1 firmware OSRTT display-only mean latency 2.89 ms at native 2560x1440, highest 210 Hz overclock, Adaptive-Sync and Low Input Lag enabled, local dimming disabled. The chart separately identifies On Display Lag, USB Polling Delay, Render Time and Total Input Lag. The stored figure is On Display Lag, including display response, excluding the host polling/render pipeline. Local dimming enabled measures 14.28 ms in the same review and is not mixed into this run. Tom's Hardware LDAT 15.9 ms end-to-end mouse/software result is excluded. The review does not state OSRTT software version or latency calibration procedure. The stored value is explicitly labelled display-only by the reviewer and current chart. Its isolation algorithm was not independently verified. Legacy OSRTT total-system documentation is not treated as defining this separately labelled result.11Maker product pagegithub.com/OSRTT/OSLTTDocs/blob/main/index.mdRead 8 October 2026Current tool maintainer documentation lists On Display Latency separately from total system click-to-photon latency and states the custom DirectX test is the same as OSRTT. This supports interpreting the current review's separately labelled On Display Lag rather than its Total Input Lag column. The exact reviewed software version, calibration and isolation implementation remain unknown.
2ms4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Lag section: total display lag 2.0 ms. The text does not name the refresh rate. TFTCentral tests the native refresh rate, here 240 Hz. Firmware and input are not stated.
Input lag at 60 Hz
11.34ms3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Same exact USA-1.0.1 OSRTT display-only mean latency 11.34 ms at native 2560x1440 fixed 60 Hz, Adaptive-Sync and Low Input Lag enabled, local dimming disabled. The chart separates On Display Lag from host polling/render pipeline and total input. Local-dimming-on 33.71 ms is a separate condition, not substituted. The review does not state OSRTT software version or latency calibration procedure. The stored value is explicitly labelled display-only by the reviewer and current chart. Its isolation algorithm was not independently verified. Legacy OSRTT total-system documentation is not treated as defining this separately labelled result.11Maker product pagegithub.com/OSRTT/OSLTTDocs/blob/main/index.mdRead 8 October 2026Same current maintainer documentation supports the separately reported On Display Lag category. No reviewer-specific calibration or algorithm validation is claimed.
Not available
Average response time (measured)
5.23ms3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact USA-1.0.1 firmware at 2560x1440, 210 Hz overclock, Advanced overdrive. OSRTT measured 5.23 ms mean initial grey-to-grey transition time across its matrix. Chart explicitly RGB 5 tolerance, not a 10–90% endpoint. Average complete settling time 10.04 ms and perceived time 5.33 ms are separate and not substituted. The same chart labels overshoot as raw RGB error with mean 0.93 and worst 6, while review prose appends a percent sign to 0.93. No overshoot percentage is stored because the chart and official OSRTT method identify raw RGB units.
4.3ms4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Response Times and Gaming section: average G2G of 4.3 ms in Ultra Fast overdrive at 240 Hz, against 5.2 ms in Advanced mode. TFTCentral's gamma-corrected method.
Overshoot (measured)
Not available
Not available
Contrast ratio (measured)
921.2:16Measurementtomshardware.com/monitors/gaming-monitors/ktc-m27t6s-27-inch-qhd-mini-led-gaming-monitor-review/3Read 8 October 2026Exact M27T6S native static contrast 921.2:1, uncalibrated maximum-backlight run with local dimming off. Dynamic/local-dimming 41545:1 and HDR nearly 45000:1 are separate and excluded. Picture preset, meter, firmware and detailed pattern sequence are not restated for this specific run.
900:14Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Default Setup: about 900:1 at default settings and maximum brightness.
SDR brightness (measured)
540.8761nits6Measurementtomshardware.com/monitors/gaming-monitors/ktc-m27t6s-27-inch-qhd-mini-led-gaming-monitor-review/3Read 8 October 2026Exact Maximum White Luminance chart prints 540.8761 nits. Its header states Maximum Brightness Settings, Stock. Surrounding SDR prose explicitly full-field measurement, local dimming off. This is uncalibrated maximum backlight, not the recommended 200-nit calibration. Firmware and exact picture preset are unstated. The 25% local-dimming SDR peak above 1300 nits is excluded from this full-field value.
356nits4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Default Setup: about 356 cd/m2 at 100 percent brightness out of the box.
HDR brightness in a real scene (measured)
Not available
Not available
PWM flicker frequency (measured)
Not available
Not available
VRR range (measured)
Not available
Not available
Colour accuracy (measured Delta E)
Not available
1.14Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Default Setup: sRGB colour accuracy average dE 1.1 at factory settings, before calibration, ICC profiles disabled.
Gray uniformity (measured)
Not available
Not available
Reflections (measured)
Not available
Not available

Connectivity

10 of 19 differ
Video inputs
AKTC M27T6S
TypeVersionCount
HDMI2.02
DisplayPort1.41
Source2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Exact original connection diagram and technical table show two HDMI and one DP input. Current maker and exact rear graphic identify HDMI 2.0 and DP 1.4. USB-A is upgrade only and is not a video input or peripheral hub.4Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026
BViewSonic XG2431
TypeVersionCount
HDMINot available2
DisplayPort1.41
Source2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Connector: HDMI x2 and DisplayPort x1. The page says HDMI 2.1 and DisplayPort 1.4. DisplayPort 1.4 is also listed by DisplayNinja, while Tom's Hardware says 1.2 and TFTCentral believes 1.2a. HDMI 2.0 is stated by TFTCentral, Tom's Hardware and DisplayNinja, and TFTCentral confirms there is no HDMI 2.1 feature. The HDMI version is left out because the maker and the reviewers conflict.
HDMI ports
2
2
DisplayPort ports
1
1
Highest HDMI version
2.0
Not available
Highest DisplayPort version
1.4
1.4
HDMI features
Not available
Not available
USB-C video (DP Alt Mode)
No2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Complete original and current connector inventory has no USB-C socket. The current web package table lists a Type-C cable, which does not establish USB-C video support.10Reviewpcgamer.com/hardware/gaming-monitors/ktc-m27t6s-reviewRead 8 October 2026Exact review explicitly no USB-C and no peripheral hub.
No4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Design and Features: no USB type-C is provided.
USB-C power delivered
Not available
Not available
Thunderbolt
Not available
Not available
USB upstream ports
AKTC M27T6S
Not available
BViewSonic XG2431
ConnectorUSB versionCount
USB-B3.21
Source2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Connector: USB 3.2 Type B Up Stream x1.
USB downstream hub ports
AKTC M27T6S
Not available
BViewSonic XG2431
ConnectorUSB versionCount
USB-A3.22
Source2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Connector: USB 3.2 Type A Down Stream x2.
KVM switch
No1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
No4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026General Usage: lists a KVM switch as a missing feature.
Daisy chain (MST)
No2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Complete connector diagram identifies input-only HDMI and DP sockets and no display output.
Not available
Ethernet
No2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Absent from complete exact connection diagram and current maker connector inventory.
Not available
3.5 mm headphone output
Yes2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026
Yes2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Connector: 3.5mm Audio Out x1.
3.5 mm microphone input
No2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Only headphone/audio output is identified in the complete connector inventory. No microphone input or headset microphone contacts are documented.
Not available
Optical out
No2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Absent from complete exact connection diagram and maker inventory.
Not available
Picture in picture
No1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Not available
Picture by picture
No1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Not available

Smart features

None of 4 known
Smart platform
Not available
Not available
Wi-Fi
Not available
Not available
Bluetooth
Not available
Not available
Remote control
Not available
Not available

Audio and camera

3 of 5 differ
Speakers
No5Reviewtomshardware.com/monitors/gaming-monitors/ktc-m27t6s-27-inch-qhd-mini-led-gaming-monitor-reviewRead 8 October 2026Exact physical inspection expressly no internal speakers. Audio passes through the 3.5 mm headphone output.10Reviewpcgamer.com/hardware/gaming-monitors/ktc-m27t6s-reviewRead 8 October 2026
Yes2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Internal Speakers: 3 Watts x 2.
Number of speakers
Not available
22Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Internal Speakers: 3 Watts x 2.
Speaker power per channel
Not available
3W2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Internal Speakers: 3 Watts x 2.
Webcam
Not available
Not available
Microphone
Not available
Not available

Ergonomics and controls

9 of 15 differ
Stand height adjustment
130mm1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Nominal 130 mm travel, maker tolerance plus or minus 5 mm. Not overall display height.
Not available
Tilt
Forward5°Backward20°1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Nominal minus 5 to plus 20 degrees with manufacturer plus or minus 3 degree tolerance. Original manual agrees with nominal limits.
Forward5°Backward15°3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Using the Monitor: tilt -5 to 15 degrees.
Swivel
Left45°Right45°1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Left90°Right90°5Reviewtomshardware.com/reviews/viewsonic-xg2431-reviewRead 10 October 2026Hands-on text: 90 degrees swivel to either side. The datasheet lists Swivel: 90.
Pivot
Counterclockwise90°Clockwise90°1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Counterclockwise0°Clockwise90°2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Pivot (Right/Left): 90 / 0.
Removable stand
Yes2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026
Yes3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Wall Mounting: remove the monitor stand.
VESA mount
100 x 1002Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026
100 x 1003Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Wall Mounting: 100 x 100 mm hole pattern, M4 x 10 mm screws, 14 kg maximum load.
VESA adapter needed
No2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original guide shows stand removal followed by direct 100x100 mount using M4x10 fasteners, without an intervening adapter. Wall bracket and fasteners are separately sourced.
No3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Wall Mounting: the bracket attaches directly to the VESA holes after the stand is removed.
Security lock slot
Not available
Yes2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Kensington Lock Slot: 1.
On-screen menu controls
Joystick, Software2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original guide establishes the rear joystick. The software route is established independently by the exact review showing MCC/MMC display controls, not inferred merely from a software download.4Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact reviewed MCC/MMC desktop utility adjusts OSD-related display settings and assigns keyboard shortcuts. Reviewed application screenshots prove actual monitor control.
Buttons3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Five control keys and a power key on the lower bezel.
Desktop software
KTC MCC PC Client1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker exact compatibility says MCC PC Client Support. The reviewed application is also called MMC and is shown operating display settings.4Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Manufacturer calls it MCC PC Client. Exact review calls the application MMC (Monitor Management Center) and documents display-setting control. The spelling difference is preserved rather than treating them as separately supplied applications.
ViewSonic Strobe Utility4Measurementtftcentral.co.uk/reviews/viewsonic-xg2431Read 10 October 2026Blur Busters Approved 2.0 section quotes the optional ViewSonic Strobe Utility, a download for tuning PureXP+.
User firmware updates
Yes1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Exact USB 2.0 Upgrade only specification, corroborated by the reviewed USB Upgrade menu. No available firmware version or update package is inferred.4Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact reviewed USB Upgrade menu and USB-A firmware-only connector establish support. No latest firmware number is inferred from reviewed USA-1.0.1.
Not available
Ambient light sensor
Not available
Not available
Presence sensor
Not available
Not available
RGB lighting
No1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
No5Reviewtomshardware.com/reviews/viewsonic-xg2431-reviewRead 10 October 2026Hands-on text: no lighting feature.
Gaming menu features
Black Equalize, Crosshair overlays, Refresh rate tracker, On-screen timer3Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026Exact reviewed menu includes these four gaming controls. No numeric shadow enhancement or performance benefit is inferred.
FPS Game, RTS Game, MOBA Game, Black Stabilization3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026ViewMode presets and the Manual Image Adjust menu. TFTCentral says there are no crosshair or FPS counter options.

OLED care

None of 3 known
OLED care
Not available
Not available
Burn-in covered by warranty
Not available
Not available
Burn-in warranty length
Not available
Not available

Dimensions and weight

6 of 7 differ
Dimensions with stand
Width617Height (lowest)409Height (highest)541Depth211mm(24.3 × 16.1 to 21.3 × 8.3 in)1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker width 617 mm and depth 211 mm agree with the exact review. Its single overall height 547 mm does not identify the stand position. The review explicitly supplies minimum 409 mm and maximum 541 mm with base, which are stored without inferring what stand position the maker meant. The disagreement is not physically reconciled.5Reviewtomshardware.com/monitors/gaming-monitors/ktc-m27t6s-27-inch-qhd-mini-led-gaming-monitor-reviewRead 8 October 2026Exact technical table expressly dimensions with base 617 x 409–541 x 211 mm. Minimum and maximum stand positions are explicitly identified by the range. Manufacturer single unpositioned 547 mm height differs and is retained as a discrepancy, not an inferred endpoint.
Width540Height (lowest)434.1Height (highest)520.1Depth239mm(21.3 × 17.1 to 20.5 × 9.4 in)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Physical (mm): 540 x 434.1~520.1 x 239. The user guide gives 539.8 x 520.1 x 239.2.
Dimensions without stand
Width617Height364Depth72mm(24.3 × 14.3 × 2.8 in)1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Width540Height323Depth49mm(21.3 × 12.7 × 1.9 in)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Physical Without Stand (mm): 540 x 323 x 49.
Stand footprint
Not available
Not available
Weight with stand
6.55kg(14.4 lb)5Reviewtomshardware.com/monitors/gaming-monitors/ktc-m27t6s-27-inch-qhd-mini-led-gaming-monitor-reviewRead 8 October 2026Exact model technical table gives 6.55 kg alongside panel dimensions with base. Maker Product Weight agrees. Cable inclusion is not specified.
6.8kg(15 lb)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Weight (metric) Net: 6.8 kg. The user guide also says 6.8 kg.
Weight without stand
Not available
3.5kg(7.7 lb)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Net Without Stand: 3.5 kg.
Box dimensions
Not available
Width698Height400Depth185mm(27.5 × 15.7 × 7.3 in)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Dimensions Packaging (mm): 698 x 400 x 185.
Box weight
9.1kg(20.1 lb)1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
8.6kg(19 lb)2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Weight Gross: 8.6 kg.

Power

6 of 13 differ
Power supply
Internal1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Maker Adaptor: None and exact feature graphic explicitly internal power supply. Original guide specifies mains AC connection.
Internal2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Power Supply: Internal Power Supply.
Adapter rating
Not available
Not available
Input voltage
100–240 V AC, 50/60 Hz2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original guide and current exact support instructions specify 100–240 V AC, 50/60 Hz, 2.7 A. The product overview also gives 96–264 V, which is not substituted for the guide and detailed maker power table.
100-240 V AC, 50/60 Hz3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Specifications table: AC 100-240V, 50/60Hz (auto switch).
Power use (typical)
Not available
Not available
Power use (max)
102W2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original normal-operation upper bound less than or equal to 102 W, corroborated by exact current support page. Not a typical draw, adapter rating or EU regulatory on-mode result. Connected load inclusion is not specified.
52W2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Consumption (max): 52 W.
Power use SDR (EU label)
Not available
Not available
Power use HDR (EU label)
Not available
Not available
Standby power
0.5W2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original guide upper bound less than or equal to 0.5 W. Regulatory mirror reports 0.2 W, but the original fiche download did not return a readable PDF and that value is not imported.
0.5W2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Stand-by: 0.5 W.
Off-mode power
Not available
0.5W3Owner's manualviewsonicglobal.com/public/products_download/user_guide/display/XG2431/XG2431_UG_ENG.pdfRead 10 October 2026Power saving modes, Off: < 0.5 W. Published as less than 0.5 W.
EU energy class SDR
G8EU energy label (EPREL)eprel.ec.europa.eu/labels/electronicdisplays/Label_2445254.svgRead 8 October 2026
Not available
EU energy class HDR
G8EU energy label (EPREL)eprel.ec.europa.eu/labels/electronicdisplays/Label_2445254.svgRead 8 October 2026
Not available
Energy per 1000 h SDR
26kWh8EU energy label (EPREL)eprel.ec.europa.eu/labels/electronicdisplays/Label_2445254.svgRead 8 October 2026Exact official label directly prints 26 kWh per 1000h for SDR. Downloaded and visually inspected, not calculated from watts.
Not available
Energy per 1000 h HDR
47kWh8EU energy label (EPREL)eprel.ec.europa.eu/labels/electronicdisplays/Label_2445254.svgRead 8 October 2026Exact official label directly prints 47 kWh per 1000h for HDR.
Not available

Certifications

1 of 9 differ
VESA ClearMR
Not available
Not available
VESA AdaptiveSync Display
Not available
Not available
TÜV certifications
Not available
Not available
Low blue light
Software1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026
Software2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Low Blue Light: Software solution.
ENERGY STAR
Not available
Not available
TCO Certified
Not available
Not available
EPEAT
Not available
Not available
Colour certifications
Not available
Not available
Other certifications
Not available
Blur Busters Approved 2.0, cTUVus, FCC-B, ICES003, CEC, TUV S-Mark, NOM, Mexico Energy, CE, CE EMC, CB, RoHS, ErP, REACH, WEEE, EAC, UkrSEPRO, RCM, GEMS, VCCI, PSE, KC, K-MEPS, BIS2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Regulations row, verbatim. Blur Busters Approved 2.0 comes from the maker product page, where it is listed as the first monitor to pass the program.

In the box

2 of 2 differ
In the box
Monitor, Stand and base, DisplayPort cable, Power cord, User guide, Warranty card, Factory calibration report2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original guide lists monitor, base, DP cable and user guide including warranty card, with power cord conditional on the actual package. Exact US review confirms IEC power cord, stand assembly and DisplayPort cable. Exact independently tested USA-1.0.1 review also explicitly lists a physical factory calibration report and quick start guide. Current web table additionally lists Type-C, which neither the original guide nor either reviewed bundle confirms, so it is omitted.4Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026
XG2431 x1, 3-pin Plug (IEC C13 / CEE22) x1, DisplayPort Cable (v1.2, Male-Male) x1, USB A/B Cable (v3.2, Male-Male) x1, Quick Start Guide x12Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Package Contents, verbatim. The user guide says cables may vary by country.
Cables included
AKTC M27T6S
TypeCount
DisplayPort1
Power cord1
Source2Owner's manualus.ktcplay.com/cdn/shop/files/M27T6S-USE_MANUAL.pdfRead 8 October 2026Original guide establishes one DisplayPort cable. Exact US reviewed bundle confirms an IEC power cord plus DisplayPort. Original guide power-cord regional qualification is preserved. The web Type-C package discrepancy does not establish inclusion for the reviewed US bundle.4Reviewdisplayninja.com/ktc-m27t6s-reviewRead 8 October 2026
BViewSonic XG2431
TypeCount
3-pin Plug (IEC C13 / CEE22)1
DisplayPort Cable (v1.2, Male-Male)1
USB A/B Cable (v3.2, Male-Male)1
Source2Maker product pageviewsonic.com/global/products/sheet/XG2431Read 10 October 2026Package Contents.

Warranty

0 of 2 differ
Manufacturer warranty (source market)
3years1Maker product pageus.ktcplay.com/products/27-inch-200hz-hdr1000-miniled-gaming-monitorRead 8 October 2026Exact US store states 3-Year Warranty Policy. Original guide states three years from purchase unless a different contract applies. This is the selected US reference, not a global statutory guarantee.
3years5Reviewtomshardware.com/reviews/viewsonic-xg2431-reviewRead 10 October 2026US review spec table: 3 years. The maker page says the warranty differs from market to market.
Dead pixel policy
Not available
Not available

Both are also in the API. Back to all monitors.